121 modeli
A 3D printable light, durable and efficient Wire Guide Clip for the FLSUN QQ Delta 3D printer, designed to secure the wires inside the towers. The part can be easily 3D printed, without any support, on a modern inexpensive 3D Printer.…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Spool Holder for the FLSun “QQ” Delta 3D Printer designed to hold a standard spool of filament securely while still allowing for quick spool changes, along with a removable PTFE tube bracket used to hold securely a PTFE tube coming from…
Wydruk około 12,48 €–15,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
From Thingiverse: Couldn't find any plug and play ADXL345 holder, so i designed my own. It's designed to be used in place of the stock probe, so the only additional thing you need (obviously other than the adxl345 itself) it's a neodymium…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
This is probably the most important printer add-on for your FLSun Super Racer! Are you tired of: Spaghetti prints? Clogged up nozzles? TPU wrapping around extruder gears? Filament running out? No bed adhesion? Superglue bed adhesion?…
There are already several re-mixes of this spool holder for the FLSUN QQ, but none support the 608 zz bearings I already have. The only difference from the original are 2 holes for m4 screws that are used to mount it to the top of the…
Really enjoy Lopatka's design, but found it a bit too long. Gave it a little trim while keeping his name intact.
Download General Zod & Equus from Superman STL Files for 3D printing by CG Pyro Miss fortune free and more .News of my Patreon CG Pyro, Hi folks! Now for supporting me with only 10USD you can receive 6 models per month, + the busts of my…
I played the game and really liked the Tiqqun Station, figured it would look good on my desk, so i modeled it. You will need some glue. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes…
A new, much improved version is made: https://www.thingiverse.com/thing:5216125 I tried a different fan-duct-holder, but it was hard to print without supports, so I figured out I could try to make one myself, that simplifies life a bit.…
Update: 2021-02-19 Found an error on the E3D Version, when reprinting the duct for myself deleted the faulty version and uploaded the corrected one Update: 2021-01-16 Finished the Support Free Version Made a Version for an E3Dv6 Hotend…
Vibration Dampers for Flsun QQ Print Settings Printer: Flyingbear Tornado Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25% Category: 3D Printer Accessories
Printed with Ender 3 V2 to repair a broken part. Parameters used: PLA, 0.4mm, 220 oC extrusor, 60 oC plate. 100% infill.
BLTouch Mount for FLSun QQ Delta printer. You will need 3 M3x10 screws to assemble and 2 screws from the BLTouch kit (or 2 M3x5) to mount. Run a M3 tap through the holes in the top plate and the two holes in the bottom piece. If you dont…
Printed with Ender 3 V2 to repair broken parts. Material: PLA, 220 oC extrusion, 60 oC at plate, 100% infill.
Please read before printing. Prints fine, and print is centered. You'll need to use the included effector spacers at both ends of the rods. At the effector end to prevent the fan from hitting the rods and at the top of the rods to keep…
This is a work in progress. I remixed the excellent Fan Duct of Eddy Emck for a Volcano hot-end https://www.thingiverse.com/thing:3936815 Just print it on the flat side no support needed (maybe for the tabs). Mirror it to have both side ;)
DIRECT-DRIVE HOTEND SETUP Including The Sherpa Mini + Stock Hotend + Stock Levelprobe + ADXL345 I designed a new hotend mount for the Flsun QQ-S Pro, which provides the stock hotend setup in combination with sherpa mini extruder as…
Sencilla guía de filamento hecha para esta delta. Se instala con el tornillo original que coge el extrusor, aunque por tu propia tranquilidad puedes poner un tornillo de 2mm más de largo. Es una pieza que puede ser impresa en PLA normal,…
Mod to add 2040 (or 2020) Aluminum Extrusions to allow for Linear Rails with original print area of the Flsun QQ-S Pro. I didn't like how the other mods for linear rails on the QQ-S (pro) significantly reduced the print area, so I made my…
Toolbox for 3D Printer Tools with Flsun Logo + Flsun Super Racer Logo Flsun Q5 Logo Flsun QQS-PRO Flsun V400 MakerWorld : https://makerworld.com/en/@sweb3791 My Models : https://www.printables.com/de/@CB_384764/models
I couldn't get ArketypeDesign's Extruder Side Mount Rev1 , which was designed for a Bondtech extruder, to work with my stock Titan extruder, and wasn't ready to purchase a Bondtech extruder when I still hadn't seen a satisfying print (due…
Universal mounting bracket for the pillar. Included plate for relocating extruder from top to pillar. Designed for M4x20 Countersunk bolt and nut for the mount and extruderplate. Other tools will depend on thickness. Extruderplate uses…
3DM4RK created a great tool and nozzle holder for the QQ. I just wanted it to fit onto the tower more securely. So I reworked the section that clips onto the tower. It's now a very tight fit. Print Settings Printer: FLSUN QQ Rafts: Yes…
I modify the design from this model, https://www.thingiverse.com/thing:4700577. To mount the omron porximity sensor for better bed leveling and also to mount all metal V6 hotend.
There's a newer, MUCH better version available, based on my v2 SR mount . FLSUN QQS-Pro Sherpa/Orbiter Housing I had trouble leveling the bed after adding a Volcano hot end to my Flsun QQ-S Pro with Foxies firmware with the head stopping…
Simple remix with brass inserts for more solid mounting to the effector plate. For all other parts see the original thing https://www.thingiverse.com/thing:4700577 Print Settings Printer: FLSUN QQ-S Pro Rafts: No Supports: Doesn't Matter…
DOWNLOAD LINK BROKEN * if download link is broken i added a zip file with all the files in it so u can manually download it from the list of parts without having to get each file individually * NOTE*** i recommend printing the v2 or…
Note: FLSUN seems to have changed up the sensor they use. A simple holder for the new leveling sensor add-on for the FLSUN QQ. It helps keep my printing space organized. If you have a QQ too, it might help you. Print Settings Printer:…
I created a Hotend holder that simultaneously holds the Creality Kolibri Extruder and converts it into a direct drive extruder. The original Part Cooling fans can still be used, any J-Head hotend can be used as Hotend. (Depending on the…
Vibration dampener for the FLSUN QQ-S Pro
The way the FLsun QQ is designed makes it easy to enclose it. Printing ABS is possible with this enclosure. The printer sides are covered with a five mm tick board, 31.4 x 66.6 cm. The corners of the panels have notches cut into it. The…
This is a replacement spool holder for the FLsun QQ delta 3D printer. No support is required. 100% of infill is recommended. The previous version is replaced with a beefier and longer version. It now supports a 10 inches spool in…
This is a simple BMG extruder base for FLSUN QQ S Delta printer. PLA is good enough for this job . Infill above 60% - 2-3 walls and 2-3 top and bottom will do the job. With some adjustments I believe it can be used in the other FLSUN…
I used this mount to mount the SKR MINI E3 inside the FLSUN qqs pro.
Designed a camera case to mount on one leg the Ikea Lack Enclosure. You can tilt it left / right, up / down. You need: 2x M4x16 Srew 2x M4 Nut 4x M4 Washer 2x 5.0x20 Wood Screw or similar Suitable glue to stick on the hinge parts (i used…
The wire guide recessed area interferes with the carriage flag for optical encoder upgrades. Remixed to offset recessed area to side to avoid interference. Category: 3D Printer Accessories
This plate will provide a mount for SKR E3 mini V3 in FLSUN QQ-S Pro. The plate is fine in PLA, no support, and just about any settings. It is designed to re-use the screws from the OEM board. They self-tap and hold just fine. The board…
Remix from excellent Menahov design : https://www.thingiverse.com/thing:4067402 I found an interesting design on the FLSUN FB forum but unfortunately the file wasn't given. So the remix try to integrate the nice feature of the FB design…
It is supposed to make rods on FLSUN QQ-S PRO printer jiggle less (idk how to call it), so it doesn't mess up printing quality (as I've read). You can adjust tention of the rubber bands by rotating the hooks 100% infill, that's all I…
This Is a model that was based on multiple parts .. but overall the creation is mostly new, still working on upgrades but so far this is pushing plastic real good. it fits the v6 hotend and its very tight .. I also made the housing so…
I wanted to improve upon my first design, and integrated the spacers for the probe-holder into the design, thereby simplifying the installation of the frame greatly. The ducts are wider, more symmetric around the nozzle, and has a much…
The is an adapter for the Flsun qq-s delta printer. This fits in the main boards location and has mounting for a BTT skr pico. This reuses the mainboards screws for mounting to the printer. One of my printers motor drivers was fried, so I…
It is a very simple parts for the flying extruder mod on Flsun QQ-S. You will need an M4 nut and an M4 8mm or 10mm. You can also put a ptfe coupler but it is unnecessary. It is designed with very tight clearance, so the ptfe will be…
Allows the installation of a Raspberry Pi and 92mm fan for cooling said Pi plus Stepsticks Requires the additional space provided by my spacer design. Note: If all four fan mounting pegs are used, the Ethernet port will be inaccessible.…
I've included the source file for this model to make it easy for someone if they have a different dryer or wish to modify it for any reason. This part is a platform that mounts securely on top of an FLSUN QQ-S Pro printer. It has…
protywu made the great optional feet for the flsun qqs pro that lifts the whole printer and gives better circulation. Find it at https://www.thingiverse.com/thing:4570936 I made a simple mount for a Pi Zero 2 that slots into it and…
I used high-brightness white ledges for lighting, it's powered directly from the source of the 3D printer, I used the rectifier 7806 and placed it so that the fan would blow and attach it to the side of the source with cooling paste + I…
Print enjoy 100% no supports for the FLSUN V400 scale to 122% and fit great! this half ring fitted way better than mine so remixed it. I remixed it again, made it taller and a bit shorter I made the holder thinner and a support piece to…
This is the source code to compile the firmware for the SKR V1.4 Turbo to build Marlin. The firmware was designed to run the following upgrade. https://www.printables.com/model/678875-new-flsun-qqs-pro-direct-drive-including-the-sherp I…
Wanted a way to secure my cable so created this. Make sure you install this at least half-way up and that your PTFE hose doesn't snag on it. Print Settings Printer: FLSUN QQ-S Pro Rafts: No Supports: No Resolution: 200 Infill: 38…
Remix of FLSUN QQ-S - Rod Stabilizers Added a slot for the timing belts so I wouldn't need to take the entire thing apart again... Print Settings Printer: FLSUN QQ-S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.16 Infill:…
This is a 3 part mold for making silicone heater socks for the FLSUn QQ printer. This should help control heating fluctuations. Dunk each mold part in VERY soapy water as a mold release agent. This should also help the silicone to cure.…
I was tired of the limitations of the MKS TFT display so I wanted to get a standard LCD for access to the menus. I did not want to reinvent the wheel so I used this case from ZilDV . Remove the MKS TFT from the QQ and install and assemble…
I wanted to reuse the articulating mount for my FLSUN QQs that has no regular aluminium extrusions. So I found this https://www.thingiverse.com/thing:4779642/files and reused part of the articulating mount and smashed them together in…
Using mount from https://www.thingiverse.com/thing:62800 Print Settings Printer: FLSUN QQ-S Pro Rafts: No Supports: No Resolution: 0.1 Infill: 25%-100% Filament: eSUN PETG Black Notes: At least 0.8mm wall Category: 3D Printer Accessories
Floatex - the zero weight floating extruder mount for Flsun QQS-Pro Printer The Stepper Mount is made for the original extruder stepper but it should fit with other as well. With the slot you can adjust the string to the center for the…
This is a remix of the famous side mount for the BMG extruder, with Titan extruders in mind. You can still mount a BMG with it, no problems, but there's more space to mount a Titan as well. Also, mounting for a filament runout sensor has…
Remix of the FLSUN QQ-(S) BigTreeTech TFT24-V1.1 or TFT35 V3.0 or TFT35 E3 V3 Screen mount by 3Deddy for the stock QQ-(S) LCD screen. In fact 3Deddy did the remix and I just did the printing, testing and fitting. See…
80% INFILL IS MANDATORY!! ANYTHING LOWER THEN 50% WILL BREAK UPON INSTALL ATTEMPT!! Print Settings Printer: FLSUN QQS Rafts: No Supports: No Resolution: 0.1mm Infill: 80 Filament: Solutech PLA Black Category: 3D Printer Parts
Print if you like it, but take care if you use it, you will lose aprox 8mm in diameter of printing area.
Shield made from the concept art for the Namurr, a model in the Haqqislam faction for the game Infinity.
Based on this part https://www.thingiverse.com/thing:4722007 but made for 12mm rods instead of the default 8mm rods. If you want to upgrade to 12mm you need these parts from here https://www.thingiverse.com/thing:4816008
My QQ-S sits on my desk and I wanted a scrap bin I could slide all the little filament bits straight in to from the build plate. This design is flush with the top of the printer without covering the air holes in the case and slides…
I really liked the design of the Spring Steel Bed Alignment Frame by MatGyver85 on Thingiverse. Since the fiberglass spacer for my print bed had fallen off, I also needed to replace them. I combined the alignment frame with the bed…
This is an extruder part of FLSUN QQ delta printer that may break like mine. I'm publishing this on behalf of FLSUN who kindly sent me the STL file upon my request. Mine broke after 2 months of use unfortunately. I printed this STL model…
Holder for an ordinary inexpensive Chinese endoscope. Attaches to the print head to observe the nozzle while printing. You will need to either cut the threads at the attachment point or install the nut from the inside of the print head.…
Replacement part for FLSUN QQ-S extruder Print Settings Printer: FLSUN QQ-S Rafts: No Supports: No Resolution: 0.2mm layer height Infill: 38 Filament: Other PLA Black Category: 3D Printer Parts
This is an extended print cooling duct for a Flsun QQ-S. I designed this duct to fit with a V6 Volcano hot end. I recommend printing in PETG or ABS. Place the flat side of the duct on the bed for easy printing. Supports aren't necessary.
It is a matter of printing the parts , inserting the heated inserts and rewiring the wires and calibrating the E-steps
PSU Stand for the FLSUN QQ-S, if you want to remove it from the casing. This stand will offer protection against touching the high voltage wires. If you don't want to measure and just go for test fitting, you could easily print the…
I struggled a bit to find a easy to print and use "weightless extruder"-mod for the FLSun QQ-S. Mount the extruder nut and bolt through the center hole in the QQ-S-top part. I have used some rubber-bands to fix the string to a flying…
A replacement parts for FLSUN QQ. This is the support part that holds an axis motor (at the bottom of the printer inside.) Mine broke after 5 months of use. I'm posting this model thanks to very friendly FLSUN QQ support staff. Posted STL…
Replaces the underside electronics cover with three 20mm-thick plastic spacers, to allow for the installation of things like PSU fan mods, and allow additional airflow & tinkering space overall. Print three of each. Print in orientation…
Worked ok in PLA, can be printed vertical without a brim if your bed adhesion is good enough. I used springs from an amazon selection pack, if the springs are too strong then it can twist the carriages, and will exert a centring force on…
Convert your christmas light cable in a consistent beam
print with 100% infill for best strength otherwise it might snap…
This is the extruder I use in my flsun qqs pro that i convert to klipper and uses SKR PICO. I relocate the extruder location to the bottom of the printer to reduce the weight at the top, so it does not wobble as much.
This is a small modification of the assembly frame from https://www.thingiverse.com/thing:4918775 . In the original design you can not insert the end pieces of the rods. In this version there is a cutout for the small flags (where the…
This is a cover for the large carriers from https://www.thingiverse.com/thing:4918775 to be able to use optical limit switches from https://www.thingiverse.com/thing:4677442 . I have used these limit switches:…
Проставки для установки экструдера для работы с глиной. В эффекторе нужно просверлить всего лишь 2 отверстия! Ссылка на комплект для работы с глиной:…
Flsun QQ-S fan duct for the original QQ-S hot end. I just shortened the duct to fit after removing the volcano hot end. The duct is approximately 11.7mm from the mounting flange. I recommend using ASA or ABS for the duct. Petg seems to…
Designed because my stock Titan broke but the BMG with original mount doesn't fit. Printed in ASA with 5 shells and 30% infill No support needed Extra materials: 2x ruthex insert (or other brand) and 2x M4 screw.
I'm using a 6x6 tactile micro switch button from amazon and dc plugs for easy connect/disconnect. This design is more compact and closer to the height of the nozzle. just slide it to the back of the carriage. I cut the 2 pins so that the…
Shaft holders for FLsun QQ-S
I'm in the process of overhauling my qqs pro and needed new mounts for my stepper motors. This great design from over at myminifactory.com is pretty solid! Printed in Overture White PETG.
I found this file on Thingiverse. It printed pretty well in PETG. DansCAD made a pretty great model.
Bought a cheap QQ-S Pro to mess with and wanted to mount a Creality Unicorn Ceramic Hotend instead of what was stock on the FLSun. It's designed for the Creailty Unicorn kits built for the Ender3v3SE/KE so it's form factor is MK8, use the…
Not much more to add other than I used Creality White PLA on this. Mad respect to the original creator!
This is a solution to mount the SmartEffector's mounting plate to the QQ-S' sliders, and yes, by printing your own sliders. Word of Caution : You might want to get another batch of bearings/bushings as the original ones can be hard to…
Hintergründe: https://wiqqi.de/page/hexhalter Magnete Einsetzen: Magnetschablone:
Für Mundspatel 17.5mm breit, 1.5mm dick (Länge irrelevant, hier: 150mm https://wiqqi.de/solution/hexhalter-koerbchen Hintergrundinformationen: https://wiqqi.de/page/hexhalter
I haven't figured out how to get my printer to not try long bridges, and it does a horrible job (with these two models) at trying to add supports to the floating bits, so I added some slabs and sank them down to just about a layer's width…
Just another model I found while on my journey to tune up the printer I got from a friend. I didn’t have mine dialed in as nicely as I could have when printing my parts, so I couldn’t use the nuts and went for heat set inserts. I’ll have…
This is a remix of the BMG arm by jonathanlundstrom for mounting a dual extruder system to the FLSUN QQ-S printer There are 2 versions: With mounting points for filament runout sensors Without sensor mountings Let me know if you need…
Printed mine in Creality White PLA. Vastly superior to the Amolen Paper White I'd used on the hotend mount earlier in the day! Far less spiderwebbing! I recently purchased a new hotend and needed to get a bracket to match the hotend mount…
The original version was great when I had the stock hotend, but now I have a different one that needed more depth for the fan to be blowing in the correct spot for filament cooling. And, because I changed my entire hotend setup, save for…
I had to move the extruder from the top of my printer to the side - long story that nobody here is likely interested in. As a result, I needed to also mount the filament holder / roller on the side so I could have the nicest PTFE angle,…
