FLSUN QQ-S SLIDER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from excellent Menahov design : https://www.thingiverse.com/thing:4067402 I found an interesting design on the…
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 583
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remix from excellent Menahov design :
https://www.thingiverse.com/thing:4067402
I found an interesting design on the FLSUN FB forum but unfortunately the file wasn't given. So the remix try to integrate the nice feature of the FB design (bigger slot on the back for the belt and curvy design for the attachment on the front).
Not tested yet. Just checked the dimensions are ok : 40 mm spacing for the rods and 15mm diameter for the LM8UU bearings.
https://www.amazon.com/Linear-Bearings-Length-Double-Printer/dp/B08NYFY3JQ/ref=sr_1_1_sspa?crid=4DO28743Q0UL&keywords=lm8uu&qid=1648558223&sprefix=LM8%2Caps%2C376&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWDU1UzVUTEhRMzhTJmVuY3J5cHRlZElkPUEwMTI3NzYzMVY2NVNWNlZGMzRHUCZlbmNyeXB0ZWRBZElkPUEwNzYxNDkxMUcwOFdYQzJLUVRQRCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
I found this other design. But too late...
https://www.thingiverse.com/thing:4669014
Found on FB, from Matthew Ornawka , a very handy set of files for X Y calibration using a "rabbit" as a calibration reference. (how to Calibration size Q5.rar.txt)
Category: 3D Printer Parts