FLSUN QQ AUTO LEVEL SWITCH
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm using a 6x6 tactile micro switch button from amazon and dc plugs for easy connect/disconnect. This design is more…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I'm using a 6x6 tactile micro switch button from amazon and dc plugs for easy connect/disconnect. This design is more compact and closer to the height of the nozzle. just slide it to the back of the carriage.
I cut the 2 pins so that the switch can sit properly inside the slot. I connected nozzle wire to a female dc connector and secure it somewhere above the carriage. Soldered a wire to a first pin that I'm gonna use to a male dc jack connector. Soldered a longer wire for a second pin and used the old usb connector from the sticky plate.
This is a combined ideas that I got from 3DEDDY and GreyAlien's designs.
note: do not heat up nozzle when using this
Print Settings
Supports:
Doesn't Matter
Resolution:
.2
Infill:
15
Filament:
n/a pla abs How I Designed This ===================FUSION 360
Category: 3D Printer Parts