FLSUN QQ AUTO LEVEL SWITCH
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I'm using a 6x6 tactile micro switch button from amazon and dc plugs for easy connect/disconnect. This design is more…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I'm using a 6x6 tactile micro switch button from amazon and dc plugs for easy connect/disconnect. This design is more compact and closer to the height of the nozzle. just slide it to the back of the carriage.
I cut the 2 pins so that the switch can sit properly inside the slot. I connected nozzle wire to a female dc connector and secure it somewhere above the carriage. Soldered a wire to a first pin that I'm gonna use to a male dc jack connector. Soldered a longer wire for a second pin and used the old usb connector from the sticky plate.
This is a combined ideas that I got from 3DEDDY and GreyAlien's designs.
note: do not heat up nozzle when using this
Print Settings
Supports:
Doesn't Matter
Resolution:
.2
Infill:
15
Filament:
n/a pla abs How I Designed This ===================FUSION 360
Category: 3D Printer Parts