FLSun QQS-s Two Piece Magic Block With Nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is support blocks with the goal of stabilizing the pillars and preventing vibrations.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Just another model I found while on my journey to tune up the printer I got from a friend. I didn’t have mine dialed in as nicely as I could have when printing my parts, so I couldn’t use the nuts and went for heat set inserts. I’ll have to redo this at some point, but they work for now.
One thing to keep in mind is, if your printer likes to sling the hotend forward when you stop a print job (in mainsail, for example. Can’t say it ever happened with stock firmware) it protrudes farther than the actual printable area, so if you only measure the arm movement according to max printable area, the arm mount will slam into the support block.