Flsun QQ-S Pro Pillar-Mounted Filament Holder Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pretty major overhaul of my previous top-mounted bracket. Now it mounts to one of the pillars.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I had to move the extruder from the top of my printer to the side - long story that nobody here is likely interested in. As a result, I needed to also mount the filament holder / roller on the side so I could have the nicest PTFE angle, providing as little stress on the system as possible.
As before, being new to all this, I accidentally printed out a roller for an Ender 3.
My new bracket is mounted to the handy-dandy Universal Mount v2 and Extruder plate for Flsun QQs by two M4x30 screws. I used washers on top and bottom.
I think, in the future, if I do another revision, I'll add a matching curved section to the bottom so it isn't "wobbly". It's not really wobbly as it is, but the roll I'm using at the moment is only 250g originally. I'll be trying out a 1,000g spool in a bit, but I don't anticipate much wobble with that.
I'll also likely cut the Ender 3 roller down in size as this is just way too long for my needs. 2,000g spools? Nah. hahaha