Flsun Q5 mini Sherpa Direct Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flsun Q5 mini Sherpa extruder Direct Drive (HGX Lite compatible)
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 895
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Flsun Q5 Mini Sherpa Direct Drive (HGX lite extruder compatible)
The extruder is angle mounted allowing full movement on the bed
House is a single printable piece, supports are necessary, if you print it upside down less support material. Tree supports works well.
Piece of PTFE tube curved guided for smooth filament movement
House vents designed to drive heatsink air away bed
For the supplied duct, the mod for drilling and tap the effector with m3 is necessary. First print the duct, it will serve as a template. See here for other sizes available:
https://www.printables.com/es/model/772141-flsun-q5-duct
Material Need:
4x M3 brass inserts of OD4.5mm Length 5mm
Piece of PTFE tube
about 320 grams of total weight
Enjoy
Print Settings
- Rafts:No
- Supports:Yes
- Resolution: 0.2mm House and 0.16 for Duct 3wall
- Infill: 25%
- Filament material: Best ABS or ASA