FLSUN SR PEI Build Plate Alignment Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This piece attaches to your existing glass bed to serve as a guide for a PEI sheet to align perfectly when placing it.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found it hard to align my PEI build plate that I bought for my FLSUN SR. I created this model to help align the sheet perfectly every time without hassle.
This model is made to attach to the existing glass build plate and mounts that come stock with the SR. I have my PEI plate and magnetic sheet placed on top of the stock glass bed.
I found that you really only need one of these models in the back only, but additional can be added to the 2 other mounts if wanted.
I printed it at 0.2mm resolution with 3 walls. Print it flat side down.
Remove the back mount holding the glass bed down and insert it into the model as shown in the GIF in the title pictures.
You can then slide in the whole assembly onto the glass lip, line it up (making sure it's flush with your PEI plate), and screw it back in. Enjoy!