FLSUN SR (Delta Smart Effector) Adapter *BETA*
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter and fan shroud for FLSUN Super Racer to work with Duet3d Smart Effector. STEP FILES INCLUDED!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 486
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
****These models have not been printed or tested yet, I have not had the time to install and test them****
You will need a dremel to enlarge the hole where the original hotend went, to make room for the new one.
The purpose of this design is to be able to use the original effector and arms of the super racer, while also being able to utilize the benefits of the smart effector.
The main body has 3 holes on top for M3 heat stake inserts and then you secure the smart effector to it with M3 screws.
The bottom of the main body has two more holes for M3 heat stake inserts and allows the assembly to attach to the existing effector with two M3 screws.
The fan shroud has 2 holes to insert M3 brass heat stakes and then you secure the shrouds from putting the screws in from the underside of the smart effector.