Counting matching models…
Added eye slots for easier placing the 20mm eyes and mounts for glasses and hats. Only 2 accessories are available at the moment but I added the hat hole and glasses arms for those who want to make their own hats and glasses. Eye holes…
Here are the parts I designed and 3d printed for my Fimi Manta rc FPV tiltrotor model. The left and right nacelles were printed in LW-PLA and attached using strips of coloured vinyl tape. They have good clearance around the servos and…
Hello. These are a few expedition accessories I created for my TRX-4M cars: 2 travel boxes KAV52 - big, small - nonfunctional Toolbox (box naradie) - nonfunctional Low long box (dlhy box) - nonfunctional Water tank (kanister voda) Fuel…
Designed using the Parametric Rugged Box by Whity (https://www.printables.com/model/258431-rugged-box-parametric/comment) with specific fitment for the Canon Selphy 1500. No supports needed. Recommend extra walls and higher infill for…
ROBOT - movable, rotating head. Easy to print, only the body with light supports. The robot can be equipped with various accessories. Suitable as a gift. Enjoy the robot ;)
Summary This is a easy-to-print 1:24 scale model of a oil drum / oil barrel. Print Print with 0.2 layer hight or lower. No supports are needed. Use 3 perimeters and 10% infill. Dimensions at 100% scale (1:24) Height: 36.6mm Diameter:…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of screw…
I created this with the amazing Parametric Rugged Box as base. I made a tough inlay which fits the basic accessories you can get. it fits: 1x Chimney Rain Cover 2x Ash Sieve 2x Meat Probes 1x Steam Port Plug 1x Steam Pod easy Print with…
I recently bought a Bosch Unlimited 10 Vacuum Cleaner and even though it is delivered with 4 extra accessories, there is only one holder , allowing to put only 2 accessories on the rail. There is place for an extra holder on the other…
This is a drop in barrel replacement for the Dart zone solo pro, that allows the addition of a longer metal barrel and/or the addition of and 16mm OD barrel accessories. Simple, straightforward design that just works. This was made via a…
A WAR HELMET FOR MY UPCOMING WING RIDER KIT TO GO WITH THE DUMMY 13. 2 X OPTIONS PRINT SETTINGS - ORIENTATION - FRONT FACE DOWN FOR ALL PARTS. - LAYER 0.1 TO 0.2MM - SUPPORTS - OPTIONAL FOR HELMETS, OTHER PARTS NO - 2-3 WALLS - INFIL…
Richards Makes 3d Printed Drum System. These drums would make a perfect addition to any drummer's arsenal. Sizes include 6in, 8in, 10in, 12in, and 13in. Also Each drum can use a standard drum head or mesh drum head. (Or if you’re feeling…
I have come up with a new way to firmly secure MFT accessories to your workbench. Since many people have tables with different sized dog holes, I have made a range of differently sized Push Dogs. Just find the size that works best for…
E N G L I S H Accessories for 50 mm brackets and 28 mm curtain rods 1x 5 mm spacer small 1x 5 mm spacer large 1x 3 mm extension for spacer 1x connector for curtain rods, rigid 1x connector for curtain rods, for sliding These parts are…
DX Engineering Carbon Fiber Mast Accessories. DX Engineering sells a 33' heavy duty carbon fiber collapsible mast. I use this mast to elevate an End Fed Half Wave antenna for amateur radio usage. I use a tripod and 3 guys lines to…
One place each for OneBlade and Multigroom series shaver Added a couple of places for most used accessories like nose and body trimmer Long tray for all other accessories Toothbrush and toothpaste tray Trays are a little bigger than…
A protective case for your dummy 13. Perfect for those who bring their dummy everywhere. Comes with mount points for the hands and accessories to keep everything organized. Looking for the ball joint model I used? Here it is:…
Universal holder for 4 printing plates and accessories. Placement on the right or left side. Holder length 220 mm. Printing without supports.
These are easy to print lube tools to make your life easier when your print says “its time for maintenance” This is a collection of my best A1 series accessories with functionality and simplicity in mind Proven works by over 700 people on…
These are enclosures for a 49:1 UNUN for end fed half wave antennas, a 9:1 UNUN for random length end fed wires, and a common mode choke. They are sized for T82-43 toroids. Each enclosure also includes an optional gasket that can be…
I made these in about 5 minutes to hold these components in this enclosure. link to rest of project: https://www.reddit.com/r/Esphome/comments/12t5z8u/comment/jh3l9i4/
Optimized for FDM 3D printing with no supports needed! After many, many iterations (like 5-6 for each clip type), I managed to create minimalistic clips that can hold all of the blade guards in this Multigroom 7000 kit, and likely other…
Pool Holder for accessories. Designed to easy reach for pool accessories you will need while you are in the pool. Recommended Filament Petg or better. PLA is not the best choice. Instalation with cable ties Print instruciton: Support: NO…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System hands, feet, and armor accessory elements produced by Lego from 2011-2016 for the Hero Factory and g2 Bionicle lines. All elements are…
Needed a way to transport my cards, and nothing is better than Whity's rugged parametric box! This has been altered to accomadate my Gundam Card Game Dice and Token Organiser and a card holder included in this upload. The card holder has…
Hello, I’m offering accessory files for the ZWO Seestar S50. The baffle is compatible with Seestar S50 filters and does not cause any vignetting. ⚠ Warning: the baffle must be printed with tree supports. Clear skies! The pack includes: 1…
MAGNETIC PADDLES Material needed : 4 magnets , dimensions 8*2.5mm , and for best feeling : N52 Cyanoacrylate glue , or any liquid superglue 2 pieces of double-sided 3M , or double-sided tape, 2*1cm Magnet properties and instructions : Add…
I have quite deep drawers in my shop, and I hate it to waste alot of space, so this gridfinity-bins are for all kinds of rotary-tool (aka. Dremel) tools and accessories and they are stackable. They are all in a 2x2 unit footprint for…
Added a muzzle to the front of the Hardball so I could insert a BCAR on the otherwise too short barrel. Comes with a Rev 2 EX BCAR adapter. Also remixed the grips so they have an hexagonal pattern if you're into that. Unless you want to…
Dolce accessories from Rune Factory 4! This listing is for the digital .STL files for you to download and print at home on your own 3D printer. Model Fits on most machines, and recommended for printing in FDM or Resin. Resin allows for…
3D Model Description: There are 4 different holders for nearly all of the available DYSON accessories: 61 mm flange for all parts, which are small and do not have an electronic connection 61 mm flange for all parts, which are small 81 mm…
Stronger locking system, better tolerances for Bambu Lab X1C (printed with PLA-CF). EDIT 18/12/2025: Tighter collar Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C Rafts: No Supports: Yes Filament: Bambu Lab PLA-CF Black…
For my GODOX TT685 I designed some light shapers. The base unit slides on the lighthead of my flash. It is lined with some textile tape (aliexpress textile tape for cable looms). Nice tight fit and no scatches. For the grid you have to…
This lets your kid mount Playmobil accessories to Duplo vehicles. Category: Toys & Games
Valentines Day Accessories include... a seasonal Heart stand , with customizable/interchangeable Conversation Hearts and a Valentines Day variation Heart Spots with 2 spots for conversation hearts ! Requires Supports. Originally printed…
this has a desk organizer, a keyboard stand, a headphone stand and a watch holder. I designed this model to save space on your desk, a place to hang your headphone and to place your watch. the keyboard stand is designed to hold compact…
Designed this support for the Creality Vacuum pump to be mounted on the Honey Wall system. It holds both vacuum pump and screw on adapter for bags
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) BAMBULAB P2 + H2 SERIES…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) PATCHES BOX / FIRST AID…
The System: The key feature of this modular design is its flexibility. Each holder connects using a sliding dovetail mechanism, allowing you to configure your setup exactly as needed. Fully Expandable: Print only the modules you actually…
This is a storage bin for all of your 3d printing accessories it is also a remix of another model
First, thanks to Pika106 for his PIKAUP design on MakerWorld. He created a model to quickly and easily pick up several cards at once and release them at the press of a button. I could not get the same suction cups that he suggested and…
Add-ons to hold light things on the Target "Jionjoy utility cart". Works well with a narrow bottle like Dr. Brown's.
Some spare parts for an Orbea Occam Dropper post. I modelled them after new parts, but i havent tested them yet. i tried to model as best after the original, but changed a few small details for better 3D printing. If you need to change…
I needed a Toolbox for my Dremel and Accessories, to keep everything accessible and easy to store. No support needed. Hinges are printed in place and can be snapfitted, UUsed the Parametric model (…
I needed a Toolbox for my Soldering station tool and Accessories, to keep everything accessible and easy to store. No support needed. Hinges are printed in place and can be snap fitted, Used the Parametric model (…
In PLA. Print 15% infill with support on the build plate and organic supports. .20 balanced or structural. In PC Blend. Print 100% infill with support on the build plate and organic supports. .20 structural. For Shen Squirt assembly.…
I would recommend minimal layer height and around 10-15% infill with 3 walls. No supports necessary. Print in place.
I created a couple of additions to make the stand more robust. First, I created a bar for added stability. Second, I created some hooks because I use my laptop vertically, and the piece would come loose when I closed it. These two…
It prints fine without support if you orient the smaller opening towards the bottom.
I gave the Simple Fisherman a fish and a way to travel. Also I updated the Head and Legs models so that the pieces fit together better.
For printing, I used ASA and PETG-CF with 30% "Honeycomb" infill and a 0.2mm layer height; both materials showed similar strength. If your printer is well-calibrated, you don't need to enable supports for the insert holes, as any slight…
Wall mountable storage for the the tools & accessories that come with a Gtech Multi handheld vacuum cleaner. Mounts with 4.5mm countersunk screws. Holds: Power Head Dusting Brush Extension Tube Spare Filter With enough space for: Hair…
This is a picture frame for a 5x7inch or 10x15 cm photo. It comes with a stand or keyholes for hanging on the wall. It is in brick form to accommodate Giant Lego Wreath accessories, like my other 3d models. It it fully customizable so you…
In PLA. Print 15% infill with support on the build plate and organic supports. .20 balanced or structural. In PC Blend. Print 100% infill with support on the build plate and organic supports. .20 structural. Note: If possible; Consider…
Gale's Accessories from Baldur's Gate 3! This listing is for the digital .STL files ONLY. This kit includes the following: - Mystra Earring - x6 Buckle Pieces Don't forget to tag us in social media posts featuring our props/accessories as…
After my family loved the original model I decided to make couple of additional accessories to make it more fancy and rich. The parts are easily glued to the model or with magnets to be put on the fridge, I have nothing special to comment…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Domina Accessories Cosplay from Overwatch. The supports required. Some…
As always, I'm open to suggestions. Feel free to drop requests in the comments! And, if you would like to support my work, please visit my Ko-fi ! - RAF = Future Changes = Will add things as I come up with them -- or get suggestions. =…
this is a stand of accessories of student.it contains slot for scale, pencil,pen,eraser,sharpener to keep it on table
Was given some 34mm OD hose that had no fittings so I created this to screw on to the hose and allow me to use it with my kacher vacuum and its accessories and connect to my Triton dust bucket . Printed with an outer brim for better bed…
An articulated shotgun for the dummy 13 that can be posed to look like it is reloading and such. Will most likely need a little bit of supports but otherwise should print fine. Please post makes so I can see how it looks!
BANG! Compact Travel Organizer & Thematic Upgrade Set This project is a compact and secure travel storage solution for the board game BANG! . Designed to be smaller and more portable than the original box, it securely stores the base game…
Inspired by @Vvix_297561's anger hair clip, I made several more of the emotes and symbols commonly used in anime. Simply print with a layer change half way through and glue onto a hair clip. May add more in the future as I feel like…
Had a few meters of 35 to 36mm vacuum hose that has parrallel ribs. Designed a fitting that allows me to use with my kacher vacumm and Triton dust bucket.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) WATERPROOF KEY CAPSULE -…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Anran Cosplay Accessories from Overwatch. The supports required. Some…
Created a box to hold the accessories for my telescope. Mounts the base of the scope with a integrated tab. Each accessory has a specific location so nothing gets lost. I mounted mine on the bottom and it clears but it might work better…
Gridfinity 5x5x6u for UNI-T UT50A multi meter. Including space for accessories. Accessories pictured are the Proster PST175 Multi Test Leads Kit. Enjoy!
Загрузил всю фурнитуру, которую быстро наклепал и использую для стойки.
For this model (V2) You will need strong 4X2mm magnets. This is what i used:…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print White Fox Cosplay Mask and Accessories Helmet from Marvel Rivals. The…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) GOLF TEES (MANY SIZES) ⛳…
How to use Parts Note! Since the left and right sheet metal work are different for the CORE One, there is a right version and a left version. The right side is the one with the filament spool! Regardless of which side you choose, you can…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Varka Cosplay Accessories Set from Genshin Impact. The supports…
A kit for assembling and mounting a mosquito net frame . They are made for what seems to be the most wildly used aluminium extrusions in Europe . They have a section of 24x15mm. The hinge has a screw version (that I recommend) and a…
Dyson v8 cordless vacuum includes a few accessories for different cleaning jobs but without an easy way to organize them close to the charging station. This “base” is placed between the wall and the charging station. It utilizes the…
In PLA. Print 15% infill with support on the build plate and organic supports. .20 balanced or structural. In PC Blend. Print 15% infill with support on the build plate and organic supports. .20 structural. Brace and Lock - Keeps the arms…
Description A protective case for your dummy 13. Perfect for those who bring their dummy everywhere. Comes with mount points for the hands and accessories to keep everything organized. Looking for the ball joint model I used? Here it is:…
This project is a collection of useful 3D-printed accessories for the legendary Soviet MTO-500 mirror lens (including models like 3M-5A / ZM-5). The goal of this project is to create practical upgrades that make this classic 500 mm mirror…
The armor accessories include: - 20 individual parts, pre-separated for easy printing and assembly - Alternative parts with cutouts for lights - Katana and Sheath - Katana Blade variant with a 2.2mm diameter hole cut for 16 AWG…
I made this because my soldering gear kept moving about and my little bottles kept falling over. It's made to take the geeboon tc22 premium stand, my basic hot air station, and my little bottles of flux and solvents.
Organiser for Roborock S7 accessories Place for: 6x Filters >10x Mops >10x Sidebrush and some space for other stuff Lid coming soon...
Box for the Bosch GOP L-Boxx inlay fitting some accessories. The Lid is hold in place by 4x1 mm Magnets.
Extended to accomodate two Garmin 840s, two Varia radars, on a side adds a pocket for MagicShine Hori 1300 light and in between the two Garmin pockets space for additional accessories. Adding also FreeCAD drawing. Printed using PLA, 0.4…
This is a combination of 1/2" EMT conduit hardware that ive made for various projects. All parts with screw holes are made to work with M3 hardware and 5.5mm square nuts. The ID of the splined holes in these fits snugly on the tubing. If…
Load the .f3d into Autodesk Fusion to modify the height, width, length, thickness and corner radius. Print in any material without support.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) FAN DUST FILTER (4…
This is a remix of the weighted backplate design from aaextra44 on Thingiverse. I printed this in PA6-CF on my X1C and noticed the trigger would not function when the part was installed on the TX22. Through trial and error, I was able to…
A couple shovels, axe, sledge and cables for the tiger model if you want some items to dress it up. The main tow cable may impede full turret rotation. Have not tested it, but looks close. Cables can be mirrored in the slicer if you want…
Here are some simple shapes which were created for a Neverness To Everness Adler cosplay. You may need to scale the models. Printed with 2 wall loops and 15% infill.
