1 / 6
Air Compressor Filter Housing Silencer retrofit replacement 1/2 npt — zdjęcie 1
1 / 6

Air Compressor Filter Housing Silencer retrofit replacement 1/2 npt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replaces the cheap, stamped sheet metal type filter housings.

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
215
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This replaces the 4 inch diameter filter housings that come on some Campbell Hausfeld and other brands of air compressor pump.

You will reuse the existing ½ npt metal fittings, but will remove the long stud and replace it with a short M6 screw.  I suppose you could shorten the stud and reuse it, with the nut too.

You will need 3 m3 heat set inserts and 3 m3x6mm socket head cap screws to hold the lid on.