1 / 6
Air Compressor Filter Housing Silencer retrofit replacement 1/2 npt
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the cheap, stamped sheet metal type filter housings.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This replaces the 4 inch diameter filter housings that come on some Campbell Hausfeld and other brands of air compressor pump.
You will reuse the existing ½ npt metal fittings, but will remove the long stud and replace it with a short M6 screw. I suppose you could shorten the stud and reuse it, with the nut too.
You will need 3 m3 heat set inserts and 3 m3x6mm socket head cap screws to hold the lid on.
