1 / 5
HevORT ZR 2.6 Reduction gearing (Retrofit) with triple bearings — zdjęcie 1
1 / 5

HevORT ZR 2.6 Reduction gearing (Retrofit) with triple bearings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 2:1 gear reduction for the HevORT ZR 2.6 Z-axis. Can be retrofitted without dismantling the ZR 2.6 system.

Ocena
0 / 5
Polubienia
7
Pobrania
33
Wydruki
0
Wyświetlenia
427
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A 2:1 gear reduction designed to bolt in place of a Nema 17 motor. It is specifically remixed for the HevORT ZR 2.6 Z-axis from the original design by iZOOM. It can be retrofitted without dismantling the bed, ball screws, mounts, etc., i.e. a direct drop-in for the stepper motors. It was designed for heavy bed assemblies that without gearing will move down by spinning the stepper. The gear reduction will prevent this.

BOM (per motor)
-Qty 1 Reduction plate
-Qty 1 Reduction plate cap
-Qty 1 Nema 17 motor
-Qty 1 75mm Length 5mm dia shaft (corbon or steel)
-Qty 3 625-2RS bearings
-Qty 4 M3x12mm hex flat head for motor mounting
-Qty 4 M3x32 screws for cap
-Qty 4 M3 screws for motor plate to original mount (screws that previously held nema motor)
-Qty 8 M3 heat set inserts
-Qty 1 Gates GT2 6mm width 40 tooth pulley
-Qty 1 Gates GT2 6mm width 20 tooth pulley
-Qty 1 Gats GT2 6mm width 158mm length (80 tooth) closed loop belt

It is recommended to make a test print to validate your settings such that the bearings fit snugly in the motor plates.

 

Print Settings

  • Rafts: No
  • Supports: No
  • Resolution: 0.5mmx0.25mm line with 0.4 nozzle
  • Infill: 30% gyroid
  • Filament color: Black
  • Filament material: PETG
  • 5 walls, 5 bottom and top layers

 

Tagi