Liczymy pasujące modele…
Only modified to use a NEMA17 stepper motor ## BOM: * cnc 60T pulley (2GT, always 2GT type) * one more 20T pulley ( the same type of the ERCF original design for selector motor) * 154mm belt, (2GT close loop) * nylong washer M5 0.5mm…
Fully 3D printed Gantry for the SV08 MAX Note you can use this also with the stock motors but you will not put the extra bearings to support the shaft! ✅ What’s New This is the double shear variant of the SV08 MAX Front-access belt…
Want to convert your EVA 3 toolhead into a direct drive without buying an extra extruder and motor? Well here you go! With these prints you can save some money and reuse some of your old parts to do so! Save that purchase for later and…
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. The original controller board has a 90° exit for the breakout board connector which sometimes leads to a collision with other parts. This cover fits the controller…
Based on https://www.amazon.co.jp/Motors-Super-Power-Nema17-LDO-42STH48-2804AH/dp/B0CD1NMN5L
I was sick and tired of the massive VFAs of the original LDO nema14 motors so I did the “Voron V0.2 Nema 17 mount” mod, but now the tophat and backplate did not fit anymore. So….. I modeled all neccesary parts to not only make the tophat…
It is difficult to mount a focus motor on Lacerta Crayford focusers, because no free threaded holes available, but I figured out how to do so! This part grabs onto the housing of the focuser shaft, and holds the motor firmly in a very…
This type of mount allows you to attach your focuser motor directly to a tube. Designed for ~170mm tubes. This type of connection is extremely easy to print out of PETG and it's nearly indestructible. Clamping is done via M4 bolt, nut and…
With this piece you can use a regular CW2 extruder without any modification. There are other models available that modify the printable parts of CW2 and those are probably a better option, but if you already printed/bought the original…
Holder for larger Pens. Usable on all Printers with a Nema 17 Stepper Motor. Use M4 Screws to tighten the Pen Happy Printing
Adapter that fits standard LEGO Technic pins and your well known NEMA17 stepper motor. Parts needed: NEMA17 motor (obviously) 4 pcs 10mm M3 bolts Lots of LEGO parts to integrate this with Have fun!
Only modified to use a NEMA17 stepper motor ## BOM: * cnc 60T pulley (2GT, always 2GT type) * one more 20T pulley ( the same type of the ERCF original design for selector motor) * 154mm belt, (2GT close loop) * nylong washer M5 0.5mm…
10/13 Added NEMA14 support. FYI NOT BEEN TESTED. 10/20 UPDATED CALIBRATION INFO 10/21 UPLOADED 5MM TO 5MM COUPLER ERCF2 Direct Drive NEMA17 Mod – Ingeniously Simple, Remarkably Effective Upgrade your ERCF V2 with this direct-drive NEMA17…
This bracket/mount can be used for placing stepper motor with gt2 pulley on the printers floor (for enclosured printers), Originally designed to add secondary table motor and screws for FlyingBear Ghost 6. Supplies required: 4pcs M3x10mm…
A NEMA17 stepper motor mock-up with a rotating shaft and face mounting capabilities. Print Settings Printer: Prusa i3 MK2 Dolly Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Post-Printing Remove supports and clean up. Assemble…
I needed a version of the original modified Sherpa Heavy that included a collet for running it in a bowden configuration so here we are. Would also work if you just want your reverse bowden more securely mounted. I've only included the…
Do not guess the direction of your stepper motor any longer while developing code - just use a clockhand-style pointer. These parts are press-fit for NEMA17 axis, just print it with an as-fine-as-possible setting (I used 0.1mm Layers in…
A simple little customizable spacer for your motor mounts. My P3Steel motor mounted the "wrong" way around, and I wanted my Z-couplers to sit a bit lower, so I whipped this up. Hope it helps you!
This Z-shaft cover is intended to slide right onto a NEMA 17 motor shaft to prevent plastic bits from getting into the motor. It has a slight bevel on the shaft key and is intended to be printed without supports. Please visit my YouTube…
This actuator can be attached to the top of a NEMA17 stepper motor, to create a simple cyclic linear motion. Two versions of the piston wheel are included, with and without spur gear teeth. The gear teeth are module 1, 40 teeth. Two (2)…
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
For those people who thinks the way the motor looks is annoying.
Parametric holder for NEMA17 stepper motors, complete with additional stowage for cables. The following parameters can be changed to control the number of cutouts and minimum spacing between them ncx – Number of cutouts along x dimension…
A fan mount for a 30x30mm fan to mount on a nema17 motor. The mount is 38mm at its widest and adds 2mm between the motor and the motor mount.
Disclaimer: These parts have been optimized for my specific printer, a full CNC gantry setup. Due to variations in printer assembly, you may need to make adjustments to ensure proper fitting. Do not copy and paste the attached macro files…
I designed it for my DIY 3D Printer project. Enjoy! nema17param.FCStd is parametric FreeCAD sourse. SHA 256 checksum: b42b007f9a17d0b99fa42b244ce4feace04e35770caa8a4032f3b37cce8e85b2 nema17param.FCStd…
Print in place hand crank to ease motor manipulation. Not sure there's much more to it. Mind the elephant foot (in thee room), you might compensate for elephant foot in the slicer if (like me) you like a good first layer squish).
Para el iman del motor de la foto he usado un casquillo torneado en laton. Pero en otros motores lo he pegado directamente al eje con una herramienta para le centrado que he incluido.
This mod is currently in beta testing and is still undergoing refinement. Use it at your own discretion. I take no responsibility for any damage caused to your unit during installation or operation.
REQUIRES CWT EXPERIMENTAL +10MM Y PARTS BELOW FOR 48MM STEPPERS, BEARING BRACKETS ARE GOOD FOR STABILITY TOO: https://www.printables.com/model/727854-sovol-sv-06-reinforced-y-axis-components-7mm-eleva/files A "Double Sheared" (bearing…
NOTE: I am still working on the RAMPS 1.4 config file with Marlin 1.1.0. Currently the printer does move around and extrude slowly, but not print worthy just yet. Testing parts to upgrade my 101hero from its gear reduction steppers to…
Vertical Wall Mount Model for 29mm Nema17 Stepper Motor. 100% Fill Consumes 16.98 Grams of Filament (Including Supports)
Mounting bracket designs are included for both horizontal and vertical mounting of the propeller/fan assembly to the breadboard which also holds the Arduino UNO R3 board and associated electronics. Print the fan blades vertical and trim…
These are NEMA17 stepper motor models in the following sizes: 42-30 42-34 42-40 32-48 42-60 The shaft lenghts are variable with 16mm, 18mm and 22mm options. The shaft has a diameter of 5mm.
How to construct a Stepper stand and design it in a CAD you can see on https://www.nerd-corner.com/solid-works-stepper-stand-nema-17// https://youtu.be/MYQX3vViWXg
simply adding ready to print stls instead of obj that had issues with orca
Print this compact adapter in under 3 minutes to bridge your 5 mm motor shaft to any standard 8 mm lead-screw coupler—no extra parts or machining needed. Super-fast print : Optimized for 0.2 mm layers, it completes in ≈3 min Tool-free…
use mount on stepper attach fan to shroud…. push and click
Offset height is adjustable parameter in FreeCAD source. Print it with 0.4 mm or 0.8 mm line width.
Default distance of centers of two 2020 aluminum extrusion profiles: 320 mm It can be changed in parametric FreeCAD source code. Requirements: Mounter plate Stepper motors M3 screws M3 washers M4 screws M4 washers M4 T-nuts
Motorized Ikea Tupplur blinds with Nema17 motor, TMC2209 driver and ESP8266(nodemcuv2). Print without support. Need M3x5x4 Thread nuts and DC-DC 12V to 5V buck converter for assembly. Fits the original mounting holes. Hardware: - Nema17 -…
Bracket for mounting a NEMA17 stepper motor to the bottom of a 2040 extrusion Category: 3D Printer Parts
Ender 3 NEMA 17 Cover for Y-axis, with hole for visibility. Good for preventing falling dust caught on motor shaft. Easy to print - no support needed.
Simple Nema 17 holder used yo attach the motor on a plate. This thing has been designed using Onshape. It is available using following link :…
A spacer for a nema17 stepper motor 3mm thick. Its just a plate of 3mm thick and five holes :)
Fully 3D printed Gantry for the SV08 MAX Note you can use this also with the stock motors but you will not put the extra bearings to support the shaft! ✅ What’s New This is the double shear variant of the SV08 MAX Front-access belt…
I found that my extruder stepper was running hot (even after tuning the current) on 15-30hr prints and I was getting print failures due to the printed drive gear on the Pitan extruder softening and spinning on the D shaft. I found…
NEMA17 bracket mount for 30x30 extrusion Category: 3D Printer Parts
DE: NEMA17 Schrittmotor-Halterung (modular) Diese 3D-gedruckte Halterung ist für NEMA17-Schrittmotoren ausgelegt und modular aufgebaut. Sie wird mit M3-Schrauben fixiert und kann durch Distanzstücke stabilisiert werden. Die Konstruktion…
This is a derivative work of the Herringbone Planetary Gear Bearing by Emmett Lalish . DEPRECATION NOTICE: New model available here: https://www.printables.com/model/178044 Curtain cord configuration: 4mm diameter balls and 2mm of thread…
NEMA17 A/B Motor mounts for Micron R1 🔧 Overview New A/B motor mounts for your Micron, that are designed to use NEMA17 motors, with accompanying dual sheer bearing holders. Full bed travel is retained, however you might need to readjust…
This pump is a perfect project to reuse the NEMA17 stepper motors from an old 3D printer like ender3, prusa MK2 etc. IMPORTANT: All parts should be printed using PETG or ASA, especially if you run the pump of longer intervals. Using PLA…
The diameter of the gearbox on my stepper is 36mm. You need 4 M3x8 Bolts, 4 M3 Nuts and 4 M3 Screws (depends how thick your bracket is). OBJ included if you need to change nuts etc.
Customized version of https://www.thingiverse.com/thing:1472259 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1472259 Instructions Using the following options: thickness = 1.5 nema_width = 42.3…
Customized version of https://www.thingiverse.com/thing:1472259 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1472259 Instructions Using the following options: thickness = 2 nema_width = 42.3…
I've mounted a 60mm high torque NEMA17 motor on my P3Steel y axis. However the toolson designed lm8uu clamp hit the back of the motor, which is mounted on the right side as seen from the front. On the y carriage I threaded the left side…
I designed this to be low profile for my own needs, cuz existing mount models were not great. Narrower then the Nema17 profile Side cutouts for wires only 4mm high. Use PETG or other higher temp plastics, NOT PLA. Steppers get hot.…
This is a vise mount for the OpenScan so that it can forcefully grip relatively flat but heavy things (in the photos, I show it gripping a metal Singer 503 front face plate). I used the following hardware: External Hex Head M3x30mm…
I have not tested this yet, but i believe it should work without major issues. some things might be remaining.
A fully parametric 3D printable planetary gearbox designed in OpenSCAD, intended for NEMA17 stepper motors. This compact single-stage planetary reduction provides high torque in a small package. It features a fixed ring gear integrated…
Printed with Voron 2.4, 0.2mm nozzle and 1.5mm layer height. Carrier plate has convinient hexagon for modular connections if your use case needs something different. Assembly requires 8 countersunk M3x8mm screws and 4 M3 nuts. Needs ~4mm…
Remix Geared Z for 2020, 2gt-200, 80t, 20t, mgn12, nema17, F695-2RS.
Want to convert your EVA 3 toolhead into a direct drive without buying an extra extruder and motor? Well here you go! With these prints you can save some money and reuse some of your old parts to do so! Save that purchase for later and…
Many NEMA17 stepper motors come with permanently attached cables and no built-in strain relief. Repeated movement can place stress on the cable near the motor housing, which may eventually lead to wire fatigue or damage. This model…
I needed blinds lifter that would work without attachment to the wall and lift my heavy blinds. So I made this, a vertical lifter using a nema-17 stepper and 3 to 1 reduction. The bead wheel fits 4.4mm balls spaced 6mm apart but will work…
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. The original controller board has a 90° exit for the breakout board connector which sometimes leads to a collision with other parts. This cover fits the controller…
Regain your full Z travel with this 17mm Spacer for Nema17 motors when using couplers. Retains grub screw access without removing motor. Requires 25mm M3 screws for securing the steppers. Can be used for other printers or CNCs, Scale Z to…
This bracket is designed for mounting a stepper motor on the cross slide of 210x400-size lathes. The complete design, assembly, and installation process is shown on my YouTube channel (link to the channel in my profile). The video is…
Title and blurb say it all. I needed to mount an arm to a NEMA17 motor. Designed for high torque / low slip. Settings 5 perimeters 5 top/ottom walls PETG or ASA prefered does not need supports Hardware needed M3x8 (or longer) for the…
A quick and dirty aluminum extrusion NEMA 17 stepper mount if you're in a pinch. Feel free to remix, just credit.
Schrittmotorhalter Nema17 / Stepper motor mount Nema17
This is a quick and ugly mod for dual Nightwatch extruder to fit Nema17 pancake with 17T. Use all parts from original Dual Nightwatch except mid-body. Use 3 screw M3x8 or M3x10 to secure the pancake on the Nema17 raiser. Add 2 heat…
2026-06-21 - Update v1.4: I've realized that v1.3 was buggy and the X limit switch could not be reached due to the geometry of the chain link on the plate. I've rounded it a little more and hopefully it works better now. I've also added a…
print V2 its way better, even though no buttons holes, 1/3 the material and time. Uses Z809 ball bearings X3 (or 4 for Version1) 12V DC power supply 10mm power jack A4988 driver NEMA17 ESP32 Dev kit tons of jumper wires inspired by…
This remix upgrades the extruder for multi-material (MMU) systems and fixes common clearance issues from the original design. Design Improvements in this Remix: Filament Sensor: Added a mount for a microswitch and steel ball to catch…
I didn't care for the other NEMA mounts I found so I made this one. I've included the 3MF file from Fusion 360 so you can add your own mounting holes for your specific need. If you want to drill your own holes post print I recommend using…
I'm building robot arms that I plan to make available to everyone through my website . To get enough power to move the arm the way I want, I needed a gearbox, which is a way to trade speed for power. Nobody I can find makes to my spec, so…
- The sleeve is just friction fit , you may adjust fit by changing your filament shrinkage parameter. Fit is solid with PLA, for frequent disassembly I would use TPU, and for a permanent solution PETG. - The mount does not include…
This is a generic Nema17 plate, parameterized in x, y, z, and corner rounding. It's based on Hoeken's mount for getting the numbers, but almost everything is rewritten now. I made this because I didn't have the appropriate plastic piece…
This is mount for BTT's Smart Filament Sensor for Creality Ender 3 series printers that have been converted to direct-drive setup where the extruder motor mount on the X gantry is vacant. The mount replaces the lid of the sensor (lid is…
Easy to print cable organizer I designed to fix the cables in a nice looking way after a conversion from a bowden to a direct drive extruder setup on my CR10. Has holes for cable ties and is pretty sturdy with the right amount of…
Bracket for mounting a nema17 motor to a 2040 v-slot extrusion Category: 3D Printer Parts
For use with 20x20mm extruded aluminum. Nema 17 mount. I needed this to add some strength to my Z axis mount. Category: 3D Printer Parts
Customized version of http://www.thingiverse.com/thing:1472259 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1472259 Instructions Using the following options: nema_hole_size = 3.5 nema_hole_spacing = 31…
FLYSHT42 / Nema17/LGX Mod for a Voron 2.4 using LGX or nema17. Will fit 10mm OD cable, fit in place with 2 cable ties. 2 Versions, If you are using the default Z chains at the back of the printer please use the Thin version and print with…
coupling of T8 trapezoidal screw and NEMA17 motor shaft possibility of various combinations: A + B / B + B / B + D / C part 1 + C part 2 Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 100 Infill:…
Adapter for NEMA17 motor to connect 12mm Hexa wheel hole
Cable chain/Drag chain mount for NEMA17 motors for stuff like MPCNC. I found good chain, but I wanted to mount chain to motors directly, so here's my solution. Two parts which clamp together with two M4 screws (DON'T OVERTIGHT!). Remember…
Originaly designed for my CTC printer (clone of the ender3 but way too bad product)
![T8 trapezoidal screw coupling / NEMA17 v1.1 [8/5]](https://media.printables.com/media/prints/204660/images/1881947_c8e34929-d4b7-450a-a684-3ccfac846475/large_display_coupl_-_c_part_2_204660.png)
