NEMA17 - MKS SERVO42C Controller cover for straight wiring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. For straight wiring modification.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. The original controller board has a 90° exit for the breakout board connector which sometimes leads to a collision with other parts. This cover fits the controller board when it's modified to a straight wire connector or directly soldered jumper wires. The following parts are required to complete the build:
4x M3 treaded bolts with 47.5 mm in length to replace original screws
4x washers DIN125 M3
4x hex-nuts DIN 934 M3
This model is licensed under CC BY-NC-ND 4.0. Commercial use, remixing, or modification is strictly prohibited. Redistribution is only allowed with proper attribution.