NEMA17 - MKS SERVO42C Controller cover for straight wiring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. For straight wiring modification.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. The original controller board has a 90° exit for the breakout board connector which sometimes leads to a collision with other parts. This cover fits the controller board when it's modified to a straight wire connector or directly soldered jumper wires. The following parts are required to complete the build:
4x M3 treaded bolts with 47.5 mm in length to replace original screws
4x washers DIN125 M3
4x hex-nuts DIN 934 M3
This model is licensed under CC BY-NC-ND 4.0. Commercial use, remixing, or modification is strictly prohibited. Redistribution is only allowed with proper attribution.