447 models
This Case is for the MKS emmc Adapter V2.0 https://www.aliexpress.com/item/1005005614719377.html There are two different variations for the top. One with hole for the LEDs and one without hole. With hole is: mks_emmc_adapter_top2.STL…
Here is an enclosure I designed for the MKS DLC32 V2.1 and the accompanying TS24-R v2.0 touchscreen. It has vents and opening for a 30mm fan for cooling the drivers. At the rear, power, USB, and TF card are accessible, as well as an…
Used material: 6x DIN 912 M3x10 - 4x for TFT, 2x for cable winder 4x DIN 7380 M2.5x6 for MKS-Pi (or any other similar screws) 10x M3 heat inserts - 4x for TFT, 2x for cable winder, 4x optional for mounting. I plan to add MKS-Pi + TS35 on…
Introducing the perfect solution to protect and optimize the performance of your MKS LS ESP32 PRO board! This custom case was meticulously designed in Fusion 360 to offer protection, functionality, and thermal efficiency, especially…
Links to the Required hardware: Mks nano v1.2 Board + tft 35: https://a.aliexpress.com/_EQSJ0yN A4988 drivers: https://a.aliexpress.com/_EwGs2gV Z axis splitter: https://a.aliexpress.com/_EvYdWGd
This is the case and the mount for MKS Pi-TS35 TFT Screen on Voron 2.4R2
This adapter plate is meant to ease the installation of an MKS Robin Nano v3.1 into the stock housing of a Kobra 2 Pro/Plus/Max. Originally I designed it to specifically fit the Kobra 2 Pro, but the housing of the Kobra 2 Plus is the…
Simple articulating mount for the Makerbase TS35 v2 screen (with encoder). Mounts as a replacement for the tower top cap. I'd suggest X tower, since that one is the closest to the mainboard and only one actually close enough to reach with…
case for mks tft 35. inspired by bear upgrade lcd case. you will need 2x m5x10 and 4x m3x10 screws.
BTT or MKS mini12864 LCD display holder with ZeroG logo Prints without supports Category: 3D Printer Accessories
MKS GEN-L V2.1 & Lerdge MOS case 材料清单 4个M3×12 螺丝 4个M3 螺母 8个M3×8 螺丝 4个M3×40 螺丝 2个M4×10 螺丝 2个M4 T型螺母 Bill of materials 4 units M3×12 screws 4 units M3 nuts 8 units M3×8 screws 4 units M3×40 screws 2 units M4×10 screws 2 units M4 T nuts MKS…
MKS Robin Nano case with "3.5 tft" touch screen. The two pieces are joined by M3 screws. I used brass inserts so one parte of the hole is always bigger There are also holes to attach two 40mm fans on one side (the one close to the…
This is a slight remix of a design from Thingiverse.
This is a CNC Controll box fhousing a MKS TinyBee, Relay, Meanwell LRS 150 24V PSU. It is specially designed to turn on a Dremel via the Relay that is connected to the build in power socket.
Of all the statues along Whitehall in London (technically, the heart of the British Empire), my favorite is the sturdy Gurkha Soldier. He stands on permanent guard outside the Ministry of Defense, rifle in hand, hat at a jaunty angle.…
Holes are for tapping M2.5 screws, if you need larger (M2.8 or M3), drill to size, or modify the model. Step and Fusion 360 file is provided with user parameter to adjust screw holes (Design workspace > Modify > Change Parameters >…
Hello Makers, I’d like to share a recent upgrade I made for my SV08 printer. I’ve designed an MKS IPS50 5-inch screen casing that can be mounted at the front of the printer, fully replacing the stock display. This design doesn’t require…
Needed parts: 4 M3x12 screws Depending on the height of the installation site, the housing can be positioned sideways, horizontally or upside down. In my case, the legs of the machine are short and it is more convenient to connect the…
Screws that you need: 4x M3x10; 4x M3x15; 4x M3 Nuts; I have printed with PETG, but also PLA is good.
Adapter to mount BTT TFT35 SPI V2.1 instead of MKS TFT35 display. (FlyingBear Ghost5, TwoTrees Sapphire Plus, etc) You will need: x4 M3x5x4 heat inserts original M3 screws x4 M3 screws with 8-10mm
Later Edit: updated to compensate for the pins that are sticking out thanks to our member DevoidTV all the help. if you printed the design already you can snip this pin out or print the new version. also I have increased the cutouts for…
This is an alternative cover/case to the one that Makerbase offers on GitHub ( https://github.com/makerbase-mks/MKS-SERVO57C/tree/main/Shell%20file ). It can easily be printed without support on a FDM printer. Category: DIY
Made this mount for a custom CNC with 40x20 aluminum profile with DLC32 MKS board. With 8 M3x8 insters on the base parts.
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Makerbase MKS IPS50 5Inch Display Integrated in the top hat we made for the Sovol SV08 All the files are already in the correct orientation and…
LowRider 3 CNC control box case for MKS TinyBee Also fitre 2 3030 fans (inlet/outlet) for cooling
*DISCLAIMER: This is a Work In Progress Project, so STL can change I want also to thank Perinski for the idea of the design of case, which is simple and it inspired my design, I suggest you to watch his designs on the following page:…
I've created a mount for the MKS TS35 touch display which comes with the MKS PI. When the MKS PI is mounted inside the case it's pretty useful to have the display attached. It also comes with a stylus holder and stylus. To mount this you…
MKS Mosfet Case (MKS Mos25) - made for Anycubic Kobra 2 Series Version 01: If the printer has higher legs, using the extensions in the link https://www.printables.com/model/729460-anycubic-kobra-series-foot-extension Version 02 : for…
My HA210N06 mosfet board died recently during 30h+ print and it scared me a lot. Luckily I was around the printer so I've been able to react on time. This time I've decided to go with a biggest possible heated bed mosfet extension I could…
mount for MKS THR CANBUS with umbilical mount for orbiter2
OpenFFBoard + ODESC / MKS Mini / Odrive-s Integrated Mount This custom-designed mount is made to securely hold your OpenFFBoard and ODESC or MKS Mini controller boards in a single, compact setup. Perfect for Sim Racing and FFB (Force…
This Adapter is for all QIDI users who want to upgrade to the MKS-Pi system for using Klipper in the future. You can order this system on amazon here: Makerbase MKS-Pi with preinstalled Klipper To add the screen to your X-Max, you also…
I printed in PETG for testing without support, had slight deformed bridges. Does not have the breakout support, support is needed on the bridged area. Reprinted with manually painted support enforcers. Results are much better. Will print…
A simple CNC Case for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. Update : Version 2 uses M3 bolts to hold the lid on and has space for…
Please don't forget to give me a Like. :) This is an mounting option for the Sovol SV08 LCD display included in the Stock Enclosure Kit. (Makerbase MKS IPS50 5Inch). It's a remix of @ Nadir “ Sovol SV08 Mount for Makerbase MKS IPS50 5Inch…
Remix dehttps://www.printables.com/es/model/273885-mks-pi-ts35-box materiales 1 ventilador 3010 ( se puede montar 4010/4020 con adaptador ) 4 tornillos m3x16mm 4 tornillos m3x8mm 4 inserts m3 4 tornillos m2.6 x unos 8mm 1 conector dc…
Version of 2022 Updates: More strong; Small improvements; Back plate without screws; Can be placed on the right or left side of the printer; Version compatible with insert nuts(I used M3x3x4.2mm insert nuts); Version without Reset button;…
The ends of the track will be narrower than the standard tack and may look a little different where they meet up but should remain functional.
Case for the Makerbase MKS MINI 12864 v.3 lcd screen. In the rear side you can glue two magnets 20*2 mm: https://bit.ly/3mfmnlc CHANGES: 03/10/2021 20:50 change the box cover (wrong file) Print Settings Printer: any Rafts: No Supports: No…
A more advanced CNC Case with XLR Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita Routers available HERE .…
A more advanced CNC Case with aircraft style GX16 and GX12 Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita…
I recently bought the great MKS US-S pedals . This is the double-sided SPD model. Originally I wanted the SOLUTION model, which has only one SPD side, to mount on my Gravel. But unfortunately, the version with the ‘EZY’ quick release…
Vertical DIN-rail mount for MKS TMC2160-0C external stepper drivers. Use PCB DIN clip to atach it to the rail. I taped an M3 thread in the holes but you can also directly screw into it. Link for PCB DIN CLIP from VORON github page.
Screen support suitable for the P3STEEL chassis from Orballo Printing, with mention “Original P3STEEL” on the front (Helvetica Bold font).
This filament guide prevents the filament spool from rocking back and forth during print, which may lead to the issue shown in the last picture (white filament spool). With a reverse bowden tube, it also evens out the drag to the print…
This is an electronics enclosure for a custom 3d printer I am building. It houses two different control boards. In my case it will be a MKS Robin Nano Ver3.1 and Raspberry Pi 4. The boards sit on a panel which can be slided in and out;…
I wanted to mount the LCD on the left of my machine but didn't want to lose access to the SD card slot. This allows you to swing the LCD out to insert an SD card. Then you can put the LCD flush with the machine to save space. (The SD card…
MKS Sbase v1.3 controlbox The mks-controlbox_top_flat.stl file is a flat-out of the TOP-COVER from this controlbox. V-Grooves are foreseen in order for you to bend in the right profile. (See step-file) This control box holds different TFT…
Fan duct and matching fan grille for mounting a fan directly above a MKS GEN_L board. When used with a thin fan (8010), the design fits right inside the JGAurora A5 with enough headroom for the Y-axis gantry to pass over. Required parts:…
Remix of the TFT lid so its not as tight against the PCB. also included is a zip tie fan mount and an air duct to cool the MKS PI.
I started with the baseline Sovol Zero LCD Case, and then used @Nadir's model of the MKS IPS50 5" Display (https://www.printables.com/model/1307275-mks-ips50-5-display-sovol-sv08-step-file-mockup) and made them fit together. This provides…
BOM and instructions related to using and installing this model to your printer are a bit buried, scroll down a bit if you just want to get to that. 15/09/2023: Check out my BTT U2C v2.1 enclosure for the Ender 3:…
I needed a box to house the MKS Mosfet that went with the MKS Gen v 1.4 and didn't find any that I liked so I made a new one. The lid should pop on and off with locking tabs. There are 2 options for each part. The Lid Passive ventilation…
I upgraded to a MKS-SKIPR with Klipper. Didn't like any of the available mounts, so here is my own for you to use. I made the M3's only 3.1mm and it was a tight fit so you may need to drill them out or put hole compensation on, but it…
Original available at: https://www.tinkercad.com/things/4JafYiYuq2R?sharecode=XP6wYm9IAqN2QSLH_3m-OuxQd9zbcuJ0qkxK16dTkss
I needed a mount for a case by "SteFix" here https://makerworld.com/en/models/912392-makerbase-mks-ts35-r-case#profileId. The case is great BUT for positioning and not being in the way of the gantry movement of the cnc i needed to lift it…
I was inspired by the design of dldesign, so I created this version for the MKS Base V1.5 board, to be able to mount it on the Anet A8's acrylic frame. You can also place a mosfet for the hotbed and a Raspberry Pi 3 Model B. Enjoy! UPDATE…
Used for astrophotography sky tracking - power distribution and stepper motor control. Based off https://wiki.openastrotech.com/OpenAstroTracker firmware but modified for a full size equatorial mount. Use PHD2 guiding for tracking. Fan:…
Quick and sloppy remix to fit the 40mm fan that came with my DLC kit. Check out the model from Fintech for the rest of the box ( https://www.thingiverse.com/thing:4680702 ). Freecad included, in Case someone wants to tinker with it. This…
I loved the LED strip light from PointNemo, but since I didn't have the LED strip, I repurposed a rechargeable LED light I had around. I made the arm longer and added cutouts for a zip tie to keep the light secure. If you are looking for…
I wanted to make 3D timelapse printing videos with my Canon 60D camera and my Prusa MKS3. You only need 2 items to make this work, CAM TRiGR and GCode change. I designed a simple trigger switch with a fun trigger tip! You simply place the…
MKS BASE v1.4 BOX (MEGA2560) CS: Tento model byl vytvořen za účelem updatu staré boxu pro desku, který byl vyroben z akrylového plastu a byl během používání poškozen a poškrábán. Navrhnul jsem ho na hliníkový profil 20x20mm s drážkou 6mm…
scatola elettrica vimar per contenere scheda mks e 2 mosfet. La scatola è abbastanza grande per contenere sia la scheda madre che i due mosfet, bed/estrusore, e relativi cablaggi e ventola 12x12 comodamente. E sicuramente gratificante…
These two cases are part of my newly developed DASH printer (design soon to be uploaded). I use the MKS 1.4 controller due to its nice integration and support for 24v operation. This is the full size board, NOT the "base" version. The LCD…
I've seen many controller-board mounts/adapters for fitting an SKR (or MKS) mainboard (four holes in the corners) into a Creality Ender printer. With all Enders, the screw holes are unique for Melzi boards. For mounting an SRK or MKS in…
Adapts https://www.printables.com/model/282522-pi-tft50-mount to accept https://www.printables.com/model/273885-mks-pi-ts35-box
This is a MKS GEN L board mount +fan mounts. It has been designed as a Tevo Tornado mod, but might fit to any CR-10, Ender and the likes. The idea was to create a solid, safe and as flexible as possible mount for the board and especially…
I wanted to move the mks board out of the way a bit and I like the 90deg mount I've seen other people with but wanted to be able to see the lights on the board a little better also. Print instructions Category: 3D Printer Accessories…
For MKS Pi with heat sink needs higher fan mount. Added 5 mm height.
[1.3 update] Added cable tention reliefs under the connections. 2020 Extrusion mount for my MKS Base v1.5 board and 80mm Fan This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0gDgUiS3XEy Print…
This is a super simple bracket to adapt the stock display mount on a Ender 3 or similar machine. It should take at most 3hrs and ~15g to print, so is very simple. This design is not perfect. STEP file is included incase you want to modify…
This is a remix of the Tarantula Control Box by RobFlip, the box is a little bit shorter than the original, and the cover has mounts the MKS MOSFET. Please consider donating a pizza or a spool of filament. Print Settings Printer Brand:…
You can use this enclosure with MKS GEN L and 1.4 and, the new SKR 1.3 Also, i included an SSR support. Category: 3D Printer Parts
A case for a SKR v1.4 (Turbo) Board and a MKS Hotbed Mos+ v1.1 Mosfet. Needs 1x 4010/4015/4020 Fan, 4x 6x1 Magnets, 8x M3x6 Screws + 8x DIN 934 M3 Nuts and 4 Screws (+Nuts) (Max. M4) for the Fan. Supports are optional if you master your…
I like the Ender 2, but the sound level when printing is annoying. That's why I got myself a new control board (MKS Gen 1.4), as well as the TMC 2100 stepper drivers. For this I designed a new case, which houses the MKS board, a Raspberry…
Personalising the Prusa MKS3 of a friend with a special Knob using his initials. No need to print it in PET as the original Prusa knob - PLA definitely works fine Created with FreeCAD
This is a plate for the heated bed Mosfet MKS V1.0. It's to prevent accident electrical connections on the bottom of the PCB. It gets mounted with M3 screws and nuts. Nylon spacers (11mm) were put between the screws and nuts. The 3D model…
Rack for screwdriver allen keys. 1.5-2.5mm hole is 3mm and 3.0mm key has 3.5mm hole
A cable spool to coil up and organise extra cables on the back of your printer. Mount to the printer with DIN965 M3 x 10mm countersunk screws, which fit perfectly into the unused factory drilled holes on the printer's frame. If you're…
Navigate and edit values with convenience. Recommended settings \_/ Ø 0.4 Layer height 0.1 Perimeters 2 Infill 20% Bottom & Top 5 5 Supports
I noticed some unused space that I thought would fit a couple of extra buck converters perfectly. This only includes the SKR 1.3/MKS Gen L half with the extra posts for two more buck converters. The rest of the parts can be found in the…
Durable cover for mks servo 57d driver. You just need 4x M3 16mm screws :)
Soporte para la mks Sbase para kossel mini. Ya que no cabe en la base, diseñe este soporte para poner la mks arriba. Es para perfiles 2020. Los agujeros son m3. Lo podeis imprimir de lado usando soportes o si no la version sin separadores…
Printed in PETG 0.4 Nozzle 0.3 Layerheight no Support 2 - 4 Woodscrews small needed. (I used what i had lying around)
Print the upper and down part separately. Glue them together. I used a screw to save it in the back of the Powerunit. There is a rest hole u can use. Use a flat hat screw to avoid collisions with der Extruder. No Support needed.
Gehäuse für die Infrarotkamera aus Fernost und anderes Zeug. Die Raspihaken werden einfach eingedreht, stramm, aber geht. UPDATE 04.05.2022: Ball_7,8.stl hinzu. geht etwas strammer. Kugeldurchmesser von 14,8 auf 15,6 mm. “Back.stl” wollte…
ElectronixBox V3 – electronics case for a DIY direct drive wheel This 3D-printed case slips over the back of a 110ST servo and holds all the electronics of a DIY direct drive wheel base in one compact unit, directly on the motor. There…
Marlin 2.0.9.7 for a 3D printer with added laser. The config is set up for an inductive sensor LJ18A3 8 J/EZ for z-offset.
This is a remake (not a remix) of the front frame of rammii's controlbox. Since we didn't get access to the F360 files i had to redesign this from scratch. This Frame features an internal cutout and external hole for the default speaker…
This remix adds support for an MKS sbase v1.3 board instead of the RAMPS board. Updated 19/03/2016 made the upper one slightly easier to print without supports Related Items http://www.thingiverse.com/thing:2187488 YB4835VA Holder…
Minimal wall mount to be used with a vertical plotter. Can be mounted with 1-3 screws to wall. Requires at minimum 2 M3 screws (10mm) and 2 M3 nuts (max 4) to attach MKS TinyBee to the 3D printed mount. Screw holes for mounting to wall:…
Carcasa soporte para pantalla MKS-TS35 para FLSun SR, con sujeción en horizontal, para usar con Flsun SR top cover frame raiser de abody
I used this model when replacing the stock mainboard in my Kobra 2 Plus with a Robin nano 3.1 mainboard. This just clears the build plate. Some may want it spaced further from the heated bed, but this is as far as it will go with the…
This is an enclosure for the MKS Gen_L V1.0 board. Features: Extrusion mounted Mounting holes and grill for a 120mm fan, which can provide a lot of cooling without a lot of noise Some space inside for routing power wires Cutouts for USB…
The pedal holder is made from scratch and we used an inner tube to prevent it from scratching the frame and in order for it to fit as tightly as it did. Due to the magnet at the bootom the pedal won't fall out, was an old magnet we still…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
MKS original screws needs to be replaced for longer m3x16. Board is secured to the mount with 4 screws.
will post actual pic once done printing. its a remix of a tb6600 din rail mount. i just removed the holes and add spacer/standoff thing for self-threading screws.
