Liczymy pasujące modele…
This is an enclosure for the MKS Gen_L V1.0 board. Features: Extrusion mounted Mounting holes and grill for a 120mm fan, which can provide a lot of cooling without a lot of noise Some space inside for routing power wires Cutouts for USB…
The pedal holder is made from scratch and we used an inner tube to prevent it from scratching the frame and in order for it to fit as tightly as it did. Due to the magnet at the bootom the pedal won't fall out, was an old magnet we still…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
MKS original screws needs to be replaced for longer m3x16. Board is secured to the mount with 4 screws.
will post actual pic once done printing. its a remix of a tb6600 din rail mount. i just removed the holes and add spacer/standoff thing for self-threading screws.
After I accidentally ruined both mainboard and toolboard by moving X beam towards myself too fast I had to revive my SV08. this set-up allows to use almost all of original wiring, excluding mainboard-to-relay wire to control bed heating.…
Marlin 2.0.9.7 for a 3D printer with added laser. The config is set up for an inductive sensor LJ18A3 8 J/EZ for z-offset.
Added 30mm fan and made power hole bigger to fit JST connector through. You can use a 5v 3010 and use the MKS PI 5v pin out or do what i did and spliced the fan wire into the MKS PI power wire and use a 24v 3010.
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. The original controller board has a 90° exit for the breakout board connector which sometimes leads to a collision with other parts. This cover fits the controller…
Single part case for 12864 MKS Mini Displays (2 options) Remix of the great design "LCD MKS Mini 12864 Mount Enclosure Box Caja" by Campy, available here : https://www.thingiverse.com/thing:2915718 BOM : 4 x M3x8 Original MakerBase Mini…
Needed parts: 4 M3x12 screws Depending on the height of the installation site, the housing can be positioned sideways, horizontally or upside down. In my case, the legs of the machine are short and it is more convenient to connect the…
4 tuercas m3 4 m3x6 4 m3 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Category: 3D Printer Parts
Another mounting bracket from my collection. This time for MKS Gen 1.4 Board with 4010 cooling fan for stepsticks. MKS board can be mount 2 ways - with power connector facing forward or backward. All M3 screw holes (for board and fan)…
I've designed up this MKS quick release pedal holder to install it on my Brompton folding bike. I had bough the Ti Workshops holder, but I didn't realise that it goes in the same place as the kickstand I had, so I was forced to come up…
I couldn't find a Mosfet bracket that fit my larger MKS v1, so I made one. This is also more robust to prevent warping. Will not fit on a Maker Select / Wanhao print bed! I was able to fit this on an Ender 3. Print Settings Printer Brand:…
Sept 23 update notes. Sept 21 2024 updated xlcd-v3-bumperback to xlcd-v3-bumperback-B Removed extra hole and better fit slots for cables. ----- An ABS back cover was added for the MK4S. It mounts to the printer but not the enclosure.…
MKS and BTT PI box for printer with 2040 extrusion. Works with MKS Robin Nano V3.1 but it will be good with other MKS mainboard with the same size
Allows mounting three 40XX fans (40mm fans of any thickness) to cool stepper drivers on an MKS Monster8 v2 board. The fan mounting holes are designed for heatset inserts (m3x4x5). M3x14 (x12) for fan mounting. M3x50 (x2) for coller…
This is a remake (not a remix) of the front frame of rammii's controlbox. Since we didn't get access to the F360 files i had to redesign this from scratch. This Frame features an internal cutout and external hole for the default speaker…
Durable cover for mks servo 57d driver. You just need 4x M3 16mm screws :)
Hello Makers, I’d like to share a recent upgrade I made for my SV08 printer. I’ve designed an MKS IPS50 5-inch screen casing that can be mounted at the front of the printer, fully replacing the stock display. This design doesn’t require…
I wanted to move the mks board out of the way a bit and I like the 90deg mount I've seen other people with but wanted to be able to see the lights on the board a little better also. Print instructions Category: 3D Printer Accessories…
Love the case but the emmc symbol on the reader was obstructed, so I put it on the case too + the arrow.
I create this model to use with my CoreXZ 3d printer, the base of the LCD is fixed on the V-slot 2040 profile with M4x8 Screws. Parts Needed 6 - 10x3mm magnetic 2 - M4x8 Screw with T-nut 4 - M3x12 Screw to fix the Back Case into the front…
Here is an enclosure I designed for the MKS DLC32 V2.1 and the accompanying TS24-R v2.0 touchscreen. It has vents and opening for a 30mm fan for cooling the drivers. At the rear, power, USB, and TF card are accessible, as well as an…
Yet another one case for MKS EMMC Adapter 2.0. My goal was having finger grips and improve PCB mounting (a USB socket takes all pushing forces instead of EMMC socket).
Hello, original print is great, I just strenghtend some parts of the original, to make it more sturdy, rest is fine, printed with 0,6 nozzle Thanks a lot
Introducing the perfect solution to protect and optimize the performance of your MKS LS ESP32 PRO board! This custom case was meticulously designed in Fusion 360 to offer protection, functionality, and thermal efficiency, especially…
the best sports team in the whole north-west of poland! to assemble sanding/melting is required! I think so… the whole logo is official but the 3d model was made by me so im putting it in the original tab and not a remix, I made it by…
Warning — I got a print issue with the tiny hooks which are attended to provide more grip, see picture. The stabilization structure was likely just too thin, and the stabilization structure became unstable during the print. Because it…
I retired a project 3D printer, but the board was still good. Flashed it with Klipper to use as a secondary MCU for another printer. The target printer was going to lose the screen as it was not compatible with Klipper. Salvaged the 2004…
I've seen many controller-board mounts/adapters for fitting an SKR (or MKS) mainboard (four holes in the corners) into a Creality Ender printer. With all Enders, the screw holes are unique for Melzi boards. For mounting an SRK or MKS in…
A DIN Rail mount for the MKS UTC USB to CAN communication module. I modified this to work with the MKS UTC I have for my Voron printer. use M3 screws threaded directly into the plastic. You may want to use plastic standoffs to prop up the…
MKS Mini 12864 Display Mount / Displayhalterung
I noticed some unused space that I thought would fit a couple of extra buck converters perfectly. This only includes the SKR 1.3/MKS Gen L half with the extra posts for two more buck converters. The rest of the parts can be found in the…
MKS PI board was designed by Makerbase to replace the Raspberry Pi to run Klipper firmware. Board allows for easy connection of an ADXL345 3-Axis Digital Gravity Sensor Acceleration Module. The case houses both the MKS PI and MKS TS35…
Ein erweitertes Gehäuse für das GRBL-Board MKS DLC V2.1 mit eingebauten Driver-Adapter P-DA-01.
This is an enclosure for the MKS Gen_L V1.0 board. Features: Extrusion mounted Mounting holes and grill for a 120mm fan, which can provide a lot of cooling without a lot of noise Some space inside for routing power wires Cutouts for USB…
MKS TFT 28 Display Mount for Ender 3 made with FreeCAD. The design can easily be changed because it is parametric. This mount needs the electronics to be on the rear side. See Teaching Tech's Ender 3 rear case for that. Category: 3D…
This part makes it possible to mount an MKS Gen 1.4 where the stock GT2560 would go on a Geeetech i3. I'm using an i3 Pro B, but this would probably work on other similar GeeeTech printers. If it does, please mention it in the comments to…
This pedal holder is designed to fit behind the seat tube on a Brompton bicycle. It provides a convenient way to store your MKS Ezy pedals (10mm axle) when detached. Print in PLA or PETG and install two 2×10mm magnets in the base for…
I recently bought the great MKS US-S pedals . This is the double-sided SPD model. Originally I wanted the SOLUTION model, which has only one SPD side, to mount on my Gravel. But unfortunately, the version with the ‘EZY’ quick release…
A simple MKS Pi mounting plate for Ender 3 Pro. Made with FreeCAD (realthunder branch Version: 2024.1006)
To assemble the body and screw it to the bracket I used heatsink nuts.
Vertical or gorizontal mount for this external Driver. Based on Fabian spring din rail mount. Between holes 52.5 mm. Extra - 50 mm fan mount. Optimized for print without supports.
The 80mm and 3x40mm version only differ on the “Top” and “Tophat”, The other parts are the same. The holes are all sized to tap with an M3 bolt (to save hardware), except the DIN rail mounts that are sized for the M3 heatsets. I used a…
The pedal holder is made from scratch and we used an inner tube to prevent it from scratching the frame and in order for it to fit as tightly as it did. Due to the magnet at the bootom the pedal won't fall out, was an old magnet we still…
I needed a mount for a case by "SteFix" here https://makerworld.com/en/models/912392-makerbase-mks-ts35-r-case#profileId. The case is great BUT for positioning and not being in the way of the gantry movement of the cnc i needed to lift it…
Dies ist eine Halterung um eure Maker Base oder auch Flipsky Regler fest und sicher auf eine Holz Oberfläche zu Montieren. Es werden ledeglich zwei M4 Holzschrauben benötigt, der Regler selbst wird dann nur noch eingeklipst. Es wird…
This is a back holder fot MKS Mini 12864 LCD. I have used https://www.thingiverse.com/thing:5429338 as LCD enclosure and https://www.thingiverse.com/thing:3194102 for 2020 stand Category: 3D Printer Parts
Soporte para la mks Sbase para kossel mini. Ya que no cabe en la base, diseñe este soporte para poner la mks arriba. Es para perfiles 2020. Los agujeros son m3. Lo podeis imprimir de lado usando soportes o si no la version sin separadores…
The stock Sovol SV06 Plus touch screen display doesn't work with mainline Klipper. This is a box to mount an MKS mini 12864 display. It will probably also work with the similar models from BigTreeTech and Fysetc. I chose this mounting…
The stock Sovol SV06 display is mounted in a spot that makes the printer's footprint wider than it needs to be. This is a box to mount an MKS mini 12864 display. It will probably also work with the similar models from BigTreeTech and…
Materials list: 1 unit MKS H43 2 units DIN912 M3x18 2 units DIN912 M3x12
This is a precise STEP mockup of the MKS IPS50 5" touchscreen display , the same model used as an official upgrade for the Sovol SV08 . Whether you're designing custom enclosures, planning multi-screen setups, or integrating this display…
Rules inside the archive, if you have suggestions feel free to comment I will change ;)
Building an Enderwire, I have found out that the screen cover wasn't quite suitable for the MKS mini12864 v3 I own. It has different PCB dimensions, a beeper on the back and slightly different components layout versus the BTT (?)…
case for mks tft 35. inspired by bear upgrade lcd case. you will need 2x m5x10 and 4x m3x10 screws.
This is a work in progress (V1 untested) 15-April-2019 Corrected some missing levels icons of the TFT and added an emergency Stop in the custom menu to use when working with Octoprint. 3-April-2019 Move the MKS Main Board up to 4.2mm so…
Please don't forget to give me a Like. :) This is an mounting option for the Sovol SV08 LCD display included in the Stock Enclosure Kit. (Makerbase MKS IPS50 5Inch). It's a remix of @ Nadir “ Sovol SV08 Mount for Makerbase MKS IPS50 5Inch…
For MKS Pi with heat sink needs higher fan mount. Added 5 mm height.
This is a mount for MKS Robin Nano V3 with a mount for a 120mm fan to cool the stepper drivers. Print Settings Printer: Hypercube - Evo(ish) Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Monoprice PLA+ Black Category: 3D…
This is an electronics enclosure for a custom 3d printer I am building. It houses two different control boards. In my case it will be a MKS Robin Nano Ver3.1 and Raspberry Pi 4. The boards sit on a panel which can be slided in and out;…
I have remixed EugenioFructuoso's model filling the little hole. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: BQ PLA White Category: 3D Printer Parts
My HicTop Prusa i3 3D Printer originally had an MKS Base V1.3 Controller (also works with V1.4 and V1.5). I replaced it with an MKS Gen V1.3 Controller and discovered that the mounting holes are different. This mounting bracket allows you…
This is a 3D Printer controller adapter for MKS Base to MKS Gen controller. I bought the MKS Gen V1.3 Controller and didn't realize that it has a different mounting holes than the MKS Base controllers. This adapter allows you to mount the…
This is a motherboard holder for the Makerbase MKS Gen L. It houses three 40mm fans to keep the stepper drivers cool in operation. Category: 3D Printer Accessories
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
I started with the baseline Sovol Zero LCD Case, and then used @Nadir's model of the MKS IPS50 5" Display (https://www.printables.com/model/1307275-mks-ips50-5-display-sovol-sv08-step-file-mockup) and made them fit together. This provides…
Voron Din Mount For E3 Boards (btt E3 V1,2,3 MKS robin E3 Ect.. for use with voron din rail mount from trident with this
Bracket compatible with flat mesh skirt for Ender 3 NG . Dedicated for MKS Pi-TS35 display case. Bracket requires 4x M3 heat set inserts to connect with the skirt and 4x M3x8 screws to secure the display. Case requires 4x M3x8 screws. For…
Migration to a cheap and reliable version of electronics from the poor original. It is placed in the basement coil compartment.
This is a remix of the control board case of the VORON core-XY printer by /u/russiancatfood This allows using a MKS Gen 1.4 board instead of the RAMPS 1.4. My design skills are obviously not as great as /u/russiancatfood's, so this remix…
Made a slight modification so the USB port of the MKS Gen L fits. Print as Mr. Clown has described: https://www.thingiverse.com/thing:4501568 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…
MKS PAD 70 Case Material list Battery 3.7v 4010 Fan 24v 4 uds DIN912 M3x16 (Screw front and rear) 4 uds DIN 912M3x12 (Screw rear and support) 2 uds DIN7991 M3x14 (Screw fan and rear) Print Settings Rafts: No Supports: No Resolution: 0.2…
Hey from rainy germany, that's my custom made control box for the MKS Gen L + 3D Freunde MOSFET V2. You should use 2x 40mm fans in the front to get enough cooling. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
My MKS Compact Ezy pedals are handy, but the original stopper clip is a bit annoying to pull off. Here is an enhanced version, including a tiny handle and two round edges at the opposite side. If you you don't know about the original…
This is a plate for the heated bed Mosfet MKS V1.0. It's to prevent accident electrical connections on the bottom of the PCB. It gets mounted with M3 screws and nuts. Nylon spacers (11mm) were put between the screws and nuts. The 3D model…
Quick mod to actively cool your MKS Heatbed MOSFET 1.0 heatsink with any 40 mm fan. This should also fit on the v1.1, but I haven't tested it yet. Uses standard 3x3x5 heat inserts for the fan holes and friction fits onto the heatsink so…
I am running a MKS SBASE v1.3 and a TFT32 display on my Hypercube. I made this mount. 4 M3s hold the display in the mount and 2 M5s and extrusion nuts hold it to the Hypercube. The recessed area was designed to accomodate the pins on the…
Just a simple vertical DIN rail mounting system for the MKS TMC2160-OC Driver boards using M3 Heat-set inserts. Designed for this tensioned DIN Rail mount with M3 Heat-set inserts.
MKS BASE v1.4 BOX (MEGA2560) CS: Tento model byl vytvořen za účelem updatu staré boxu pro desku, který byl vyroben z akrylového plastu a byl během používání poškozen a poškrábán. Navrhnul jsem ho na hliníkový profil 20x20mm s drážkou 6mm…
The adapter will allow the mounting of an MKS Gen L board to the standard Anet A6 mounting holes. Hardware: 4 x M3x16mm screws 4 x M3 nuts 4 x No.4x9mm flange screws (but you could try the M3x12mm screws from the kit) Print Settings…
The 40mm fans for the MKS Gen L on my FLSUN i3 were dying so i quickly mapped out a plate to mount the only fan I had laying around, 80mm from a CPU heatsink. Needs standoffs in place but otherwise mounts with M3 screws/nuts. Almost for…
The back has been modified to accommodate the bracket created by Oleg Romanov. The screw holes have been adapted to fit the new bracket. I've also enlarged the holes in the piece that rests on the profile to accommodate the M5 screws.
OpenFFBoard + ODESC / MKS Mini / Odrive-s Integrated Mount This custom-designed mount is made to securely hold your OpenFFBoard and ODESC or MKS Mini controller boards in a single, compact setup. Perfect for Sim Racing and FFB (Force…
Case for MKS Base board on P3Steel printer. Mounts on the left (as seen from the front) PETG or ABS recommended. OpenSCAD source included Category: 3D Printer Parts
This is a thing to cover the cable mess when fitting an MKS-GEN 1.4 board to the Ender 3. It is made to work with this case: https://www.thingiverse.com/thing:1795015 and with the Tennisball-feets https://www.thingiverse.com/thing:2449402…
Case for the MKS Robin Nano v3.X, for a klipper setup with a RPi Zero 2w. Also works with Orange Pi Zero 2w. Uses the GYVRM-K240505 24 to 5v 5a step down converter, but the two holes can be adapted to your liking. I also chose to mount a…
