1 / 1
Simple MKS DLC 2.0 case and connectors for CNC 3018 and 2020 profiles — zdjęcie 1

Simple MKS DLC 2.0 case and connectors for CNC 3018 and 2020 profiles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple case for the MKS DLC 2.0, the case allows you to run easily all the wires for a CNC out of the box

Ocena
0 / 5
Polubienia
6
Pobrania
129
Wydruki
0
Wyświetlenia
944
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

*DISCLAIMER: This is a Work In Progress Project, so STL can change


I want also to thank Perinski for the idea of the design of case, which is simple and it inspired my design, I suggest you to watch his designs on the following page: https://www.thingiverse.com/perinski/designs

This is a simple case for a MakerBase MKS DLC 2.0 motherboard, for 3018 CNCs or for mounting on a Vslot profile with 2 M3 T-Nuts

 

This project aims to be a complete set of cases and connectors for route easily all the wires, including toolhead wires, so the other STLs and GCodes will be uploaded over time

Tagi