1 / 2
Motherboard Tray for the MKS-SKIPR and UTC Boards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a nice universal motherboard tray
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 1110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (12)Powiązane
Needed a good universal motherboard tray to suit the Makerbase MKS-SKIPR board along with their new UTC CANBUS board.
Print from anything you like, but I would avoid PLA unless the environment is cool, otherwise, ABS at a minimum,
You can glue it down to the inside of your chassis or use the provided screw holes, you will need 8 x m3 threaded inserts for the standoffs
The rails down the sides are designed as cable tie points for cable management and to prevent flexing at the connection point.