MKS-Pi + TS35 box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple box for MKS-Pi + TS35 TFT display with flat cable winder.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 419
- Wydruki
- 6
- Wyświetlenia
- 2588
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Used material:
6x DIN 912 M3x10 - 4x for TFT, 2x for cable winder
4x DIN 7380 M2.5x6 for MKS-Pi (or any other similar screws)
10x M3 heat inserts - 4x for TFT, 2x for cable winder, 4x optional for mounting.
I plan to add MKS-Pi + TS35 on my delta so i designed this box. Bottom of the box has 4x M3 heat insert 67x40mm for further mounting but I didn't designed any mount yet. Box is opened because of Pi cooling.
I was annoyed by long TFT cable so there is very useful simple flat cable winder.
It was designed in FreeCAD
EDIT: I modified TFT frame, it was very tight. I added +0,2mm space for all four walls