Sovol SV08 Mount for Makerbase MKS IPS50 5Inch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to mount MKS 5" Display to the same location stock SV08, no drilling in to the frame needed
- Ocena
- 4,75 / 5
- Polubienia
- 33
- Pobrania
- 139
- Wydruki
- 6
- Wyświetlenia
- 944
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Later Edit:
updated to compensate for the pins that are sticking out
thanks to our member DevoidTV all the help.
if you printed the design already you can snip this pin out or print the new version.
also I have increased the cutouts for the USB-C and HDMI cables and the front cover to cover the display bezel
We had a lot of request for this display, we made it to be fit in the original location. this is the same display that Sovol is selling also you can find it here
https://s.click.aliexpress.com/e/_DeZULL5
BOM
Heat set inserts
8x M3x4,5OD x 4mm long
Screws SHCS
2x M3x6 SHCS
2x M3x10 SHCS
4x M4x18 SHCS
Keep an eye to the Youtube channel we will make a video how to install this Mod on your SV08
You can follow us on