Liczymy pasujące modele…
This is a custom screen enclosure for the ELECROW Raspberry Pi Touchscreen 5" monitor (amazon non-affiliate link below). I have this monitor mounted in a Lian Li case - which did require cutting a hole in the mesh part of the case.…
I needed a simple stand for an additional Home Assistant Raspberry Pi kiosk I am adding to my home – so I whipped this up. You’ll need some 2.5mm screws for assembly (I used socket head cap screws). Add some rubber stick-on pads to keep…
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
I recently picked up a Sovol Zero for some high speed printing and was disappointed in the stock screen / knob interface, as well as the Factory Sovol 5 inch screen upgrade (which works perfectly, but just looks weird being so large on…
What can you expect in Detail? A variable width game controller from 50cm to 60cm adjustable. Nudge/Tilt with accelerometer gyroscope, adjustable on the screen. Variable Flipper Buttons position, for ergonomic handling. Touchscreen Menu…
About this Case for the Heltec Touchscreen This case is easy to assemble , and wraps your Heltec v4 WiFi LoRa 32 Expansion Kit (touchscreen) inside a protective enclosure that provides easy access to the power and 35 buttons (wakeup…
Introduction Quite a few people keep their Snapmaker U1 close to the floor which makes the touchscreen a bit harder to see and use. This mount allows tilting the touchscreen upwards for better visibility and usability. This is not an…
Description This is a custom-designed, sleek, and protective case for the popular 7-inch HDMI LCD monitors often found on AliExpress and Amazon. The case uses a "Sandwich" construction , where the screen is securely clamped between the…
this is a case for a raspberry pi 5 attached to a waveshare 5 inch capacitive touch display 800x480, if you have any suggestions please leave a comment M2.5x10mm screws
This is a slightly more advanced project for anyone owning an Ender style printer and has converted it to running Klipper. It requires purchasing a touch screen from Aliexpress and compiling and flashing code to it. It’s not as scary as…
Available both in STL and STEP for easy editing. We would love to see your creations, so feel free to add them as remixes to this file. The red indentations on the backside shows the magnet location: The yellow indentation on the front…
NORSMIC Raspberry Pi Screen, 7 & 10.1 inch Monitor Frame - Required (new) hardware: 2 - M3X16 Flathead - Stainless screws 2 - M3X16 Flathead - Stainless screws 2 - M3 Hex Nuts - Stainless I also printed and shown in photos this model:…
Front bezel and rear case for the 10.1" Raspberry Pi touchscreen sold by pidisplayconsole.com and other similar units. I have seen others that look identical but I don't know brand names. I printed this using Hatchbox PLA on the Bambu X1C…
Print Settings Printer: ANET A8 with E3D REVO Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: eSUN PLA black Category: 3D Printer Parts
To be able to mount the screen at the side of my V-Core 3, I decided to create a foldable mount, to minimize the place if it is not in use, or no changes are needed while printing. The touchscreen I use is a full encased ELECROW 7-Zoll…
Case for the Raspberry Pi 4 with a 3.5" TFT display module. Enlarged holes around micro HDMI ports to facilitate cables with larger ends, adjusted positioning of port holes, and added a view slot so the PWR and ACT LEDs can be easily…
I remixed this design to mount my 3.5 touchscreen and a Raspberry Pi 3B+. The mounting holes for the RPI are oversize so I could use some M3 screws I had here. You will either need to open up the holes in your PI or make the ones smaller…
Fits to Audi 80 Audi 90 Audi 100 Audi Cupe Type 89
This is a case for the following LCD module or similar: https://www.aliexpress.com/item/1005006420023450.html Please check the attached drawing: the screw hole pattern on the tabs should be 157 x 114.7mm. This is a perfect case for a…
Enclosure for the Waveshare 4.3" DSI Capacitive Touchscreen Display . Assembly The screen is mounted using four screws from the bottom of the case. The lid it self is pretty much just cosmetic to close the box. Printing instructions…
After upgrading the printer to the unpatched upstream Klipper firmware, the Qidi touchscreen no longer works. (Compare https://github.com/leadustin/QIDI-up2date-english/blob/main/Klipper-Update/update+upgrade.md) I used this adapter plate…
I use Volumio for my music playback and had been looking for a way to use the touchscreen interface for when my computer is switched off. For a while I looked for some solution that was reasonably elegant and found it in amason101070's…
This is to use with @Jacaeiro's excellent RPi 4B case. The standoffs screw into the back of the front part. With long enough screws, probably can use the back, but I chose to leave it off for additional air flow (and since I wouldn't…
I designed this enclosure so I could mount my touchscreen in my car connected to a raspberry pi running navit, but it would also be great in your workshop. It fits a Hamtysan 10.1" touchscreen…
This is a 45-degree stand for the original touchscreen display that attaches in the original location using the same screws. An additional 3 screws identical to the original ones and 3 nuts are required for installation. There are…
This is just a simple stand that holds the Touchscreen as well as the IO-Board. I use this for developing for the cm4. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Filament:** Amazon BasicFil PETG…
This case is for the Waveshare 4inch Square LCD: https://www.waveshare.com/wiki/4inch_DPI_LCD_(C) It has cutouts for a Raspberry Pi 5 but should fit other fullsize Pi models. It has openings for MicroSD card, power and USB
My Pi was overheating, so I found the expansion board fan, but wanted to keep the screen as well, so I modified this print to allow for both.
Simple protection pour l'écran tactile WaveShare 5,5 pouces amoled (modèle WV16103), pour lequel je n'ai quasiment pas trouvé de modèle imprimable sur le net. Le but à terme est d'intégrer des pieds (ou un système d'accroche), ainsi qu'un…
I created this wall mount so I could use the Waveshare 10.1DP-CAPLCD touchscreen for a home assistant dashboard. It is designed to mount to a 3-gang electrical box. Update for V2 I ended up relocating my raspberry pi out of the wall, i…
This is an enclosure I designed for my Sovol SV08 that mounts under the doors of the Sovol enclosure. It is designed to be used with the Uctronics 7-inch IPS touchscreen…
These models provide the structure needed to create a weather resistant enclosure for an ElecLab 10.1 Inch touchscreen monitor and a Raspberry Pi. A great solution for a temporary outdoor kiosk (Used for my Christmas Kiosk for my Light…
This is a custom screen enclosure for the ELECROW Raspberry Pi Touchscreen 5" monitor (amazon non-affiliate link below). I have this monitor mounted in a Lian Li case - which did require cutting a hole in the mesh part of the case.…
Quick edit of jeoje' waveshare screen mount to add a hex pattern. Grab the rest of the parts for the screen mount over at Voron Mods if you need them.
This is a simple screen cover for the GoPro Hero 8 to work together with the official Rollcage Case (AJFRC-001). I designed this for the usecase when the camera is mounted backwards (outside a car, a bike or everything else) to protect…
Miniature Jukebox running Moode on a Raspberry Pi with touch screen LCD and a Pi-DAC Pro. See readme.txt file for additional details. The top and back slide on with no screws required. Updates: Changed the name to suggest using MoOde…
This is certainly not perfect as I was skeptical about the flexibility of the PLA I was using, so the notches which snap into the display's bizarre mounting holes are rather short, but from my testing they're enough for holding the…
I shimmed the original screen attachment brackets by 2mm to allow a Waveshare 7 inch display to sit flush in the screen mount. The brackets are a touch more flexible as a result, but the display is a snug enough fit that it should have…
Hi, update: added a loosen version of the adapter part I designed this wall mount fot this Raspberry Pi 7 inch Case https://www.thingiverse.com/thing:1585924 The Pi with the Screen have a weight about 400g. So you dont have to print the…
Raspberry Pi 4B and 7" TouchScreen Enclosure I start from … I need a case for Raspberry Pi 4B and 7" TouchScreen from Raspberry Pi, to be used as a controlling unit in the home automation system. Found on Printables, but … I try…
A mount for Adafruit 5" touch display ( https://learn.adafruit.com/adafruit-5-800x480-tft-hdmi-monitor-touchscreen-backpack ) suitable for use with octoprint/octodash or other purposes. Note, if you're looking at buying a touchscreen, I…
I needed a simple stand for an additional Home Assistant Raspberry Pi kiosk I am adding to my home – so I whipped this up. You’ll need some 2.5mm screws for assembly (I used socket head cap screws). Add some rubber stick-on pads to keep…
/!\ This is not a remix since I dont' include original 3D model /!\ This kit is not complete see explanation below Rick Impey published a posable housing for a 5.5" touchscreen with a Raspberry 5 to be used as a Klipper SBC for 3D…
The screen never seemed to have a good place to go and increased the machine's footprint. Designed this bracket mount on top of the Z-Axis V Holder. No modifications needed, slides in without tools or any additional parts. For travel…
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
This is a bit of a niche need but I recently bough this 5" Raspberry Pi touchscreen from Amazon { https://www.amazon.com/dp/B0DJSSDL37?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 }, which only had rear mounting locations. Nearly all the other…
This is a Cover for the ADT Keypad (Premise Pro Touchscreen) it can be for decoration or for blocking the light. You can also put tint on the inside to help it block more light.
External Control Case for Klipper 3D Printer with Fan Cooling This was a project I made for myself after I had to move my printer to my garage. I needed a way to keep my Pi cool even in the hot summer. This external case was what I came…
With this Adapter you can mount a PanelPilot SGD 43-A HMI Touchscreen in a Mercedes Sprinter.
Could not find any, so I designed my own. BE CAREFULL NOT TO STRIP THE HOLES (especially the top ones)! Because of the HDMI plug there was little space to play with. Mounting holes are for M3 bolts (2.6mm diameter) and 157mm apart. There…
NOTES The mount is made to be used with the Ender 3 Max ( 2021 ) but should work with any Ender 3 printers with the 4040 profile rails. The case is made for use with the Raspberry Pi 3 Model B and FREENOVE 5 Inch Touchscreen ( FNK0078A) .…
A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…
These are HDMI and USB cable management clips used for cleanly routing your top hat touchscreen wires on a SV08 Printer. But they could most certainly be used for other similar applications. They are made to tightly hold one larger HDMI…
Top mount for the later revisions of the BTT 5inch screen with the HDMI and USB-C on the back side, not the side.
This is a 4.3" 800x480 DSI Capacitive Touchscreen IPS LCD mount for Ender 3 v3 SE for klipper to replace stock screen. Needed to print with support. Infill: 20. Wall thickness: 3. Can be printed with any regular filament, eg: PLA, PETG,…
Here is my take on an enclosure for a Raspberry Pi 5 and the Elecrow RC050S 5" capacitive touchscreen. Splitting the back casing into two pieces was meant to reduce support material needed, and of course adds the need for a glue-up.…
This is a 7 inch touchscreen Design Case V1. The monitor housing is multifunctional and offers 6 positions. For mounting on walls or devices a VESA75 mount helps. The VESA mount can also be used to screw on a Raspberry housing. More…
Maturity: Very Good. 7 prototypes. In use since 2025/05. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount. 2x M3 DIN 562 square nuts 2x M3x10 (length 10mm minium) ISO7380 or ISO4762 screws Insert the 2 M3 screws instead of…
This is an enclosure for the relatively cheap 7 inch touch display with an embedded ESP32-S3 processor. I use it on a stand to have a dashboard for my home battery system setup. But you can also mount it on the wall in any orientation you…
This is a 7-inch touchscreen Design Case V2. The monitor housing is multifunctional and offers 6 positions. For mounting on walls or devices, a VESA75 mount helps. The VESA mount can also be used to screw on a Raspberry housing. More…
Frame for Hosyond 7 Inch Touchscreen IPS DSI Display Compatible with Raspberry Pi 5/4/3 Link to display on Amazon: https://www.amazon.com/Hosyond-Touchscreen-Compatible-Capacitive-Driver-Free/dp/B0D3QB7X4Z?ref_=ast_sto_dp&th=1
I didn't find proper case, so i made my own w-w
This is a work in progress (V1 untested) 15-April-2019 Corrected some missing levels icons of the TFT and added an emergency Stop in the custom menu to use when working with Octoprint. 3-April-2019 Move the MKS Main Board up to 4.2mm so…
REMIXED FROM: https://www.printables.com/model/370544-stream-deck-stand-for-ducky-one-2 AND https://www.thingiverse.com/thing:6342576 This is a little case/mount combo, I retrofitted the clips from my previous spotify car thing mount and…
I was looking for touchscreen with an On/Off Button and I ended up with designing my opwn desk case for it Print all parts. Use a soldering iron to press the inserts into the frontpanel. put he screen into the case Place the small button…
I started with the baseline Sovol Zero LCD Case, and then used @Nadir's model of the MKS IPS50 5" Display (https://www.printables.com/model/1307275-mks-ips50-5-display-sovol-sv08-step-file-mockup) and made them fit together. This provides…
Since I placed the printer in a walk-through area, its screen was in the way, so I made a holder to mount it in the front of the printer. It uses the native magnetic holder. Be sure to include supports when printing. You want to support…
I recently picked up a Sovol Zero for some high speed printing and was disappointed in the stock screen / knob interface, as well as the Factory Sovol 5 inch screen upgrade (which works perfectly, but just looks weird being so large on…
This is a simple frame to mount the "7 Inch Touch Screen Monitor for Raspberry Pi" by CUQI to a Tevo Little Monster or wherever the screws fit. It got a bar to prevent the screen from bending while touching it and a hole to fix your…
Angled stand/case for BigTreeTech TFT70 7-inch touchscreen with Raspberry Pi mount, easy desk viewing.
Ratrig V-Core 4 with a door on the front panel instead of the all clear front paneling seems like it's missing something without a display, so mounted a 7" HDMI touchscreen. This one is for the BigTreeTech HDMI7 (tried to insert a link…
Ratrig V-Core 4 with a door on the front panel instead of the all clear front paneling seems like it's missing something without a display, so mounted a 7" HDMI touchscreen. This one is for the BigTreeTech HDMI7 (tried to insert a link…
I have mounted a touchscreen display on ratrig v-core 4 and needed to route the HDMI and USB cables nicely along the outside of the enclosure so made this. It works quite well, just added for and Im able to neatly route the cables along…
Holder for a 7" Touchscreen made by waveshare or joy it to be mounted to the bracket by vman81 https://github.com/vman81/pi400-mount/ measurements of the screen can be found in the pictures, source here:…
Just remixed SRC3D-1s Raspberry Pi 7" touchscreen rollbar frame because I wasn't able to rotate the display in the latest OctoPI + Octodash version.
I really dug the idea of a smaller touchscreen that “fits” the smaller Sovol Zero, so I remixed the faceplate of the model a little bit to add some design elements to pretty it up a bit. Sadly, my old eyes aren't as enamored with the idea…
I used the M2.5 8mm standoffs and 4mm M2.5 screws that shipped with the display on the base, and 16mm M2.5 screws to mount the frame, display and spacers onto the base. The holes on the frame have sacrificial bridging so you will need to…
I'm learning CAD software right now and made a lil frame for the Pimoroni Hyperpixel XP Square touchscreen. Doing some other stuff with it for a bigger raspberry pi 5 project but for now thought it would be cool to upload it for those who…
I've made a short video about this enclosure here: https://www.youtube.com/watch?v=KwfX0tTKoT0&lc=Ugz9CeK5zrpN7btUBod4AaABAg This enclosure is designed to fit a raspberry pi 3 and the official 7inch touch display. The brackets are…
Remix of Leetspeak's excellent Raspberry Pi Official 7" Touchscreen case mounting arms. Per the original design, you have to assemble the mount by sliding it onto the end of a 2020 or 2040 extrusion. I didn't want to disassemble, so I…
Remixed the 4B case lid by Jacaeiro, remixed from the original by luc_e, to include a pass-through for the Pi Camera ribbon cable. No other changes - enjoy! Category: 3D Printer Accessories
This is a Mount for the Anet A8 LCD (5 buttons) it attaches to the back of Thing http://www.thingiverse.com/thing:1585924 Timelapse Backing: https://youtu.be/NMMJD39fxxo Faceplate: https://youtu.be/0KvTqpyjctU Print Settings Printer: Anet…
Y-Rail Adapter modified for usage with Hyperpixel 4" Touchscreen LCD with Raspberry Pi4 for Octoprint and OctoDash for Prusa i3 MK3S+ https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without
I wanted something to mount on the underside of my Ikea Lack Enclosure Like the original it can fit an 3,5" Touchscreen, temperature sensor and 2 switches. But it also fits a Raspberry Pi 3/3B without an riser cable, easy access to the…
A couple of months ago, my friends and I switched from a physical battlemap to playing D&D Beyond online / in person on a monitor. It’s faster, easier for the DM, and keeps the game flowing — but I really missed the physical side of…
Fits on top cross bar with 3mm screws and t-nuts. I fount that the bowden tube and wiring could get snagged on the mount. So V2 has rounded edges and dose not sit flush with bottom of the 20x20 extrusion. Print Settings Rafts: Doesn't…
Mounting clips for the Official Raspberry Pi Touchscreen. Designed for flush mounting the screen on a 3mm acrylic panel, material unimportant as long as it's 3mm thick. Check pics for usage. Reach out with any questions. Mounted with…
This is a case to add the Pololu D24V22F5 5V step-down converter to the 3.5" touchscreen mod for the Prusa i3 MK3. Parts needed: Pololu D24V22F5 5V step-down converter M2 x 6mm screw x 2 pieces for mounting the Pololu 22 AWG wire (not any…
This stand is designed to fit the 5 inch HDMI screen case that is listed as the source design. It has been printed and is currently in use without issue. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Holder for touchscreen-pen, designed for the use on a paraglider cockpit. so you can use your display with gloves. Glue some velcro on the back
Fits the waveshare 4.3 in LCD with the brass hex standoffs it comes with. Still a work in progress, (I want to update the USB cover) but I have 3 built and use them everyday. Requires the following: 24 QTY--M3 brass hot melt inserts, 5mm…
This stand is compatible with the model kindly provided by lanwanman. This model allows the screen to be oriented in all directions and can also be wall-mounted in the four main orientations. In my case, it was also designed to be…
Build an Off-Grid Touchscreen Pager & Tracker This design allows you to purchase parts from Amazon, Adafruit, or elsewhere and assemble them on a PCB you can get from PCBWay or even manufacture yourself (gerber file attached). Assembling…
Flat stylus for the resistive touchscreen on my NanoVNA. Pictured is printed in Polycarbonate but any material harder than TPU should work just the same.
Bigger Customized Stylus ideal for Flashforge AD5M/AD5X ( and every other! ) Screen Multicolor with REDBEARD-PRINTS Branding 3mf and STL feel free to customize
Remix of LCD cover (for MK3S+) to fit to Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 (model without power button - see: https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without ) - it is done…
Remix of LCD cover (for MK3S+) to fit to LCD on model for Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 (model without power button - see: https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without…
What can you expect in Detail? A variable width game controller from 50cm to 60cm adjustable. Nudge/Tilt with accelerometer gyroscope, adjustable on the screen. Variable Flipper Buttons position, for ergonomic handling. Touchscreen Menu…
