Case for Waveshare 4.3in DSI touchscreen, RPI and 4010 fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Integrated Case I designed for to allow me add Klipper Screen to my printers
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 863
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits the waveshare 4.3 in LCD with the brass hex standoffs it comes with.
Still a work in progress, (I want to update the USB cover) but I have 3 built and use them everyday.
Requires the following:
24 QTY--M3 brass hot melt inserts, 5mm OD x 4mm length, as used on voron builds
20 QTY--M3 socket head cap screws, 10-12mm length
4 QTY --M3 socket head cap screws 18-20mm length
1 QTY – 4010 fan, 5volt
------------------------
Only tested with raspberry Pi 3B but it has a lot of room so should fit 4B also.
The support bars are not necessary if you want a free standing case. I only use them to bolt them to a surface or put double stick tape on. If you don't need the support bars reduce the number of hot melts inserts and 10-12mm socket heads by 8.