Case for Waveshare 4.3in DSI touchscreen, RPI and 4010 fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Integrated Case I designed for to allow me add Klipper Screen to my printers
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 90
- Makes
- 1
- Views
- 865
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits the waveshare 4.3 in LCD with the brass hex standoffs it comes with.
Still a work in progress, (I want to update the USB cover) but I have 3 built and use them everyday.
Requires the following:
24 QTY--M3 brass hot melt inserts, 5mm OD x 4mm length, as used on voron builds
20 QTY--M3 socket head cap screws, 10-12mm length
4 QTY --M3 socket head cap screws 18-20mm length
1 QTY – 4010 fan, 5volt
------------------------
Only tested with raspberry Pi 3B but it has a lot of room so should fit 4B also.
The support bars are not necessary if you want a free standing case. I only use them to bolt them to a surface or put double stick tape on. If you don't need the support bars reduce the number of hot melts inserts and 10-12mm socket heads by 8.