1 / 6
Sovol SV-08 Low Profile 7-Inch Touchscreen Enclosure — zdjęcie 1
1 / 6

Sovol SV-08 Low Profile 7-Inch Touchscreen Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is designed for the Sovol SV08 as a way to add a 7-inch touchscreen that mounts under the Sovol enclosure doors.

Ocena
0 / 5
Polubienia
7
Pobrania
39
Wydruki
0
Wyświetlenia
390
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is an enclosure I designed for my Sovol SV08 that mounts under the doors of the Sovol enclosure. It is designed to be used with the Uctronics 7-inch IPS touchscreen (https://www.robotshop.com/products/uctronics-7in-capacitive-lcd-ips-touchscreen-raspberry-pi-w-prop-stand?srsltid=AfmBOooXdApLlLhlXC231izbD0ljJze_k77wPIgMtHsLF8TU3-fMsHlH) 

This can be printed with PLA or PETG using the following settings:

  • 0.2mm or 0.3mm layer height
  • 4 walls
  • 20% infill
  • Support is needed on the cover.

You will need 4 M3-10 and 2 M4-40 screws for securing the cover and mounting the enclosure to the printer.

Tagi