Sovol SV-08 Low Profile 7-Inch Touchscreen Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is designed for the Sovol SV08 as a way to add a 7-inch touchscreen that mounts under the Sovol enclosure doors.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is an enclosure I designed for my Sovol SV08 that mounts under the doors of the Sovol enclosure. It is designed to be used with the Uctronics 7-inch IPS touchscreen (https://www.robotshop.com/products/uctronics-7in-capacitive-lcd-ips-touchscreen-raspberry-pi-w-prop-stand?srsltid=AfmBOooXdApLlLhlXC231izbD0ljJze_k77wPIgMtHsLF8TU3-fMsHlH)
This can be printed with PLA or PETG using the following settings:
- 0.2mm or 0.3mm layer height
- 4 walls
- 20% infill
- Support is needed on the cover.
You will need 4 M3-10 and 2 M4-40 screws for securing the cover and mounting the enclosure to the printer.