Hamtysan 10.1" touchscreen enclosure

I designed this enclosure so I could mount my touchscreen in my car connected to a raspberry pi running navit, but it would also be great in your workshop.

It fits a Hamtysan 10.1" touchscreen https://www.amazon.com/dp/B0B9M5SCG4?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

The arm it is compatible with can be found here https://www.amazon.com/dp/B08L1DHJYH?ref=ppx_yo2ov_dt_b_fed_asin_title

You will need 4 m3 25mm screws and 4 m3 nuts

If you plan on using this case mounted with the metal arm I recommend printing at a higher density (I printed mine at 90% with petg and I'm confident it shouldn't break off when hitting bumps)

ADDED A WALL MOUNT

I made a wall mount for people who don't want to use the enclosure with the metal arm. Printed at 80% infill with the supports everywhere option in prusaslicer. After removing the supports clean up with some sand paper or a file or you are gong to have a hell of a time taking it on and off. Also I included the .3mf in case you need different sized screw holes, just open as a project and you will be able to edit the negative volumes or delete them and make your own.