Hamtysan 10.1" touchscreen enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for the Hamtysan 10.1" touchscreen that can attach to a metal arm mount.
- Rating
- 4.5 / 5
- Likes
- 15
- Downloads
- 525
- Makes
- 2
- Views
- 1,998
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
I designed this enclosure so I could mount my touchscreen in my car connected to a raspberry pi running navit, but it would also be great in your workshop.
It fits a Hamtysan 10.1" touchscreen https://www.amazon.com/dp/B0B9M5SCG4?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
The arm it is compatible with can be found here https://www.amazon.com/dp/B08L1DHJYH?ref=ppx_yo2ov_dt_b_fed_asin_title
You will need 4 m3 25mm screws and 4 m3 nuts
If you plan on using this case mounted with the metal arm I recommend printing at a higher density (I printed mine at 90% with petg and I'm confident it shouldn't break off when hitting bumps)
ADDED A WALL MOUNT
I made a wall mount for people who don't want to use the enclosure with the metal arm. Printed at 80% infill with the supports everywhere option in prusaslicer. After removing the supports clean up with some sand paper or a file or you are gong to have a hell of a time taking it on and off. Also I included the .3mf in case you need different sized screw holes, just open as a project and you will be able to edit the negative volumes or delete them and make your own.