1 / 5
Touchscreen LoRa Encrypted Off-Grid Pager
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Build an Off-Grid Touchscreen Pager & Tracker
This design allows you to purchase parts from Amazon, Adafruit, or elsewhere and assemble them on a PCB you can get from PCBWay or even manufacture yourself (gerber file attached).
Assembling the Hardware
There are quite a few steps, but the PCB itself pretty much has the instructions printed on it. Just make sure you stick with exactly the parts listed in the attatched PDF parts list, and it's not too difficult if you know how to solder.
Flashing the Firmware
With the hardware assembled, you can go ahead and flash the firmware.
Final Assembly - Putting Together the Enclosure
The DIY guide walks you through it step by step, but here is a video demo of me putting one together.