1 / 2
MKS DLC32 box for 2.4 LCD on 20x20 V-Slot — zdjęcie 1
1 / 2

MKS DLC32 box for 2.4 LCD on 20x20 V-Slot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box for clean installation of MKS DLC32 and 2.4 LCD on 20x20 V-slot rail. Suitable and Twotrees Totem or any other 20x20

Ocena
5 / 5
Polubienia
59
Pobrania
1099
Wydruki
3
Wyświetlenia
4696
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

My Twotrees Totem laser was provided with a 8 bits board. 

I wanted to have autonomous laser engraver thus I switched for MKS DLC32 with low cost 2.4 LCD screen. 

This design will work on any 20x20 V-slot rail.

I have used PLA as there is no real mechanical constraint.

Logo can be printed without MMU using the virtual extruder trick.

Using M3 screws.

Alternative case with hidden screw and threaded inserts. I can prepare a version without threaded inserts upon request.

Alternative box cover with threaded inserts and fan but not compatible with screen. refer to https://www.printables.com/model/275433-mks-dcl32-case-and-35-screen

 

Tagi