P
Printables
Prusa XL LCD USB Covers
Ho fatto delle piccole modifiche ,altezza del testo 2mm
Wyniki wyszukiwania: lcd
Liczymy pasujące modele…
P
Printables
V6 flip cover for Leica M10 M11 cameras LCD
LCD screen and buttons cover for Leica M10 series cameras - V6 version Improvements over V5 model mount plate is completely covering base plate of Leica camera, providing extra protection but also more comfortable grip LCD cover plate has…
P
Printables
Enclosure for Guition ESP32-S3 4.3" LCD Display
This is a simple enclosure for Guition ESP32-S3 display. Designed to be printed with 0.2mm layer height without supports. Requires 4 M3x8 screws. The screws goes directly into plastic. I printed mine with ABS and even with plastic…
P
Printables
Rear LCD Cover for Non-Protruding XL Display Mount
cover the rear of the LCD after relocating to the top of the extrusion Print in place no supports No hardware required snaps in place.
P
Printables
EasyThreed K1 LCD Upgrade
Hi guys, I did this project to make a frame for the K1 LCD, the printer is originally with buttons but I managed to buy just the K2's LCD from EasyThreed on AliExpress, just need to say that your K2 LCD was broken, I paid $7 for him. It…
P
Printables
JK-BMS LCD cover
JK-BMS LCD 4.3 cover for LiFePo4 box "BLC" JK-BMS LCD 4.3 кришка кля корпусів LiFePo4 box "BLC"
P
Printables
Gridfinity bin for Waveshare 1.69in Touch LCD Module
About Gridfinity bin for Waveshare 1.69in Touch LCD Module. You will need at least 2x M2x12 screws to screw it into place. Used Bin - 1x1x3 - pmcquay.stl as a base model. Part of my smart enclosure for 3D printer . Please give a like and…
P
Printables
Gridfinity bin for Waveshare 1.29in Touch LCD Module
About Gridfinity bin for Waveshare 1.28inch Round LCD Display Module with Touch (Waveshare 24155). You will need at least 2x M2x12 screws to screw it into place. Used Bin - 1x1x3 - pmcquay.stl as a base model. Part of my smart enclosure…
P
Printables
Case for Adafruit 1.8 Color TFT LCD display with MicroSD Card Breakout ST7735R
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
P
Printables
MK4S Front Plate Cover - no xLCD
I liked the idea of printing a front cover for my printer, but I have moved my xLCD to outside of my enclosure. So I remixed the front cover from AngryWookiee and filled in the spot where the xLCD would be. Printed with the 0.20mm SPEED…
P
Printables
Lian Li O11 Dynamic EVO RGB/Mini front panel LCD mod
NB! The O11 Dynamic EVO is not supported as it is totally different from O11D EVO RGB. The print bed size for EVO RGB is minimum 326mm. Internal 14-inch diagonal LCD custom made for LianLi Dynamic O11 Dynamic EVO RGB/Mini PC case. For the…
P
Printables
Kurzweil K2500R LCD adapter
This is a simple adapter to convert a Kurzweil K2500R to use a standard 240x64 graphic LCD module such as the CRYSTALFONTZ CFAG24064A-TTI-TZ module. The K2000 used a standard sized LCD module but the K2500R uses a larger module with a…
P
Printables
Xiaomi Mi LCD Writing Tablet mount
Mount under desk for Xiaomi Mi LCD Writing Tablet (Mi Color Pad)
P
Printables
Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-3.4C
No supports needed for V1. V2 needs supports. Print face down for a smooth front side. The display fits in the case by friction when printed on my Prusa Mini+. 02/03/2026: V3 - Added a small inward chamfer sloping towards the screen.
P
Printables
Prusa Core One/+/L, MK4, MK4S xLCD display cover with hole for all types of LED Diffuser
To ensure long‑term protection of the display and prevent dust, scratches, and other environmental contaminants from compromising its clarity, it is advisable to print and install a dedicated protective cover. This accessory is…
P
Printables
MiSTer Multisystem2 LCD panel Mount FPGA based retrogaming console enclosure
This is the MiSTer Multisystem2 LCD Screen (flip up cover) enclosure. We will post more internal adaptors and cover panels for different size LCD modules when available. If you design a different LCD cover/mount/enclosure, please share…
P
Printables
4 Inch LCD 480x320 Case and Stand
A nice desktop case/stand for a 4" LCD TFT screen. My use case was for displaying various info from a Pi5 via python scripts. Here is the LCD used for the model: https://www.amazon.com/dp/B0CKRJ81B5 The “Box” is designed to accept (4)…
P
Printables
XL Screen Bumper (New LCD)
Updated to have no bottom in the screen protector. This accomplishes two things. First and foremost the new style LCD fits. Other than that it makes it easier to keep neat and tidy without having tiny bits of filament caught in the tray…
P
Printables
LCD Screen Cover for UPS PowerShield Defender PSD650
I have no idea why on UPS that work 24/7 manufacturers still doing bright displays that are not turning off after some time. The LCD on PowerShield Defender 600 is very bright during nights so I modelled a simple cover for the screen and…
P
Printables
Pi Zero 2W with 3.5 inch Waveshare LCD
I added access to the two micro USB ports on the back and shifted the opening for the screen to align with the waveshare 3.5 in LCD. Also, added tabs so that the lid clicks and stays in place.
P
Printables
CORE One x INDX - xLCD display cover (Updated)
This remixed xLCD cover is best printed with 5 x 0.25 tools to ensure the logos are as sharp as possible, I have also enabled PETG supports on tool 6 with a 0.4 CHT tool. This has been tested on the R3 xLCD.
P
Printables
![[WIP]DIY Monitor from Lenovo laptop LCD LP173WF4(SP)(F1) and similar](https://media.printables.com/media/prints/9272192f-4229-417d-b2d2-dbcbfd00428c/images/11305362_1e41f76b-e0a1-40af-966f-d6433e1f4609_541741c1-beac-42ac-9531-adc52c7cf939/pxl_20251130_120236148.jpg)
[WIP]DIY Monitor from Lenovo laptop LCD LP173WF4(SP)(F1) and similar
DIY Monitor Frame – Lenovo LP173WF4(SP)(F1) This is a 3D-printable frame for a Lenovo laptop LCD panel LP173WF4(SP)(F1) . The cutout is made precisely for this exact panel model – no universal fit. The design allows mounting of the LCD…
P
Printables
Kossel Mini SmartLCD-Case
A simple case for the RepRapDiscount SmartLCD controller on a Kossel Mini with 15mm extrusions . It features an SD card slot and an emergency halt button. Note: The knob for the rotary encoder is not part of this thing. I've used…
P
Printables
Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-4C
Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-4C based on my other design for the 3.4" version
P
Printables
Haas LCD Bezel
This is a bezel for a 1993 Haas VF0 and a LCD conversion. This gets rid of the gaps between the main panel body and the screen itself, it is not for the machines with the recessed screen. If the cutout is 9 9/16" x 11 3/4" this bezel will…
P
Printables
Custom 12-Key Macropad with Encoder and LCD Display
This project is a custom 12-key macropad designed and built as an academic project. The enclosure and structural parts are 3D printed (FDM), while the keycaps were printed using SLA to achieve a higher-quality surface finish. The macropad…
P
Printables
LCD Makerbase MKS Case
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
P
Printables
Durable Arduino LCD Case/Box for 16x2 Displays
This Dobble Arduino LCD Box/Case is a compact enclosure for Arduino projects with 16x2 LCD screens. It helps keep your display and electronics protected and neatly organized. Dimensions: Length: 18.5 cm Width: 2.8 cm Height: 3.9 cm The…
P
Printables
Prusa i3 MK3 LCD Knob - Rotary phone inspired
Remix of the official LCD-knob to look and function like an old rotary phone. I find this works better when scrolling through settings or adjusting the z-height. Printed with default PLA settings 20% infill no brim.
P
Printables
Breadboard Mount for 2,8" LCD TFT Touch Display ESP Arduino
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…
P
Printables
Macro Keyboard with CPU & GPU Temperature Display (ESP32-C3 + 16x2 LCD)
This project is a custom 4-key macro keyboard with an integrated 16x2 LCD display that shows real-time CPU and GPU temperatures . The device is based on an ESP32-C3 microcontroller and communicates with the PC via USB-C . Temperature data…
P
Printables
1.69inch LCD Module case stand
The stand provides good stability, a clean look, and keeps the display easy to read. See also lcd case:
P
Printables
Ender 3 lcd space cover
I used petg sunlu. Just a cover for the hole that once was a screen.
P
Printables
Waveshare 2 inch LCD LabStack Module
I needed this to display the output of an air quality sensor attached to a Pi that was mounted in a 10 inch LabStack setup. I printed the model using Prusament PETG. Settings probably don't matter but I used .25 Speed. The screen attaches…
P
Printables
Prusa mini FYSETC clone 3.2 inch LCD with side USB slot
Prusa mini FYSETC clone 3.2 inch LCD with side USB slot to fit with mold injected front plate. Accomodates the larger than original clone screen, and fits with the cavity of original molded part, with space for side mounted USB extension…
P
Printables
JK BMS 3.2 to 4.3 inch lcd display adapter frame
frame for installation 3.2 inch display for jk bms instead of 4.3 inch
P
Printables
Pancake 2 LCD Cover
This model is designed to protect the LCD for Pancake 2 , a keyboard designed by LostQuasar. The model has built-in supports for the screw bosses, which will need to be removed after printing. This should print easily with any material on…
P
Printables
Raspberry Pi 3007 fan + 128x32 lcd Module + Top cable slot (Snap Together)
Added the slot for the top flex cable. Improved the walls for holding the LCD.
P
Printables
Microlab - 3.5" LCD - 1.5u Tray + Col
The size of the STL files has been adjusted to match the LCD format.
P
Printables
ESP32-S3 2.8" Touch LCD Alarm Panel
ESP32-S3 2.8" Touch LCD Alarm Panel Requires 8xM2.5 screws. May require drilling out holes (recommende 3mm drill bit) depending on printer accuracy.
P
Printables
case for ESP32-C6-LCD-1.47
case for ESP32-C6-LCD-1.47 display with touch(soldered) https://spotpear.com/wiki/ESP32-C6-LCD-1.47-inch-LCD-Display-TouchScreen-LVGL-SD-AXS5106L-JD9853.html screw DIN912 m2x6
P
Printables
5 inch DSI LCD display & Raspberry Pi 3B+ enclosure
5" Touchscreen IPS MIPI DSI Display https://www.amazon.com/Hosyond-Touchscreen-Compatible-Capacitive-Driver-Free/dp/B0CXTFN8K9?th=1 Micro SD Card Extension Cable Adapter 15 cm - like that…
P
Printables
Ryobi LLCDI1802 Drill Gridfinity
Gridfinity holder for the Ryobi LLCDI1802 Drill it uses a 6x5x6 base and can also hold a Dewalt screwdriver set
P
Printables
QIDI Q2 LCD Riser
Montageadapter für LCD, es können farbliche Einlagen eingesetzt werden. Die Tür lässt sich bei abgesenktem Display öffnen ohne am Display anzustoßen.
P
Printables
Tuya Bluetooth Temperature Humidity Sensor LCD TH05F AAA case
Tuya Bluetooth Temperature Humidity Sensor LCD TH05F AAA case with room for battery holder The sensor can be found on aliexpress:…
P
Printables
Floppy Emu Case for Model A and B - Old/Early type with pcb header for LCD
I have older model A and B Floppy Emu that uses sockets for the LCD, making them taller than the later models. This uses 4, M3 x 12mm flat head screws threaded directly into the plastic to assemble the case. I printed my case in PETG, no…
P
Printables
Ender 5 LCD Cover With Lid
A cover for the Ender 5 with a cover to block the light from the LCD screen
P
Printables
LCD display strip for 10" rack
A panel to hold 4 0.96" LCDs I use to display stats of pis in my little cluster. 4 lids are held with 4 M2 screws each - don't over-tighten.
P
Printables
Front Panel Bezel for 16x2 LCD module
Bezel for a 16x2 LCD This design is to mount a common 16x2 LCD onto a front panel. You will need to cut a hole at least 70x20mm. The bezel is designed to cover up the hole so if your handiwork is as rough as mine, you won't see it! I…
P
Printables
XY7025S DC Buck Converter Enclosure (Board + LCD Case)
This enclosure was designed for the XY7025S DC buck converter/power supply module, which I purchased from AliExpress. The module does not include a case, making it awkward and unsafe to use as a bare board, so I designed this custom…
P
Printables
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
P
Printables
Helldivers Hellbomb prop LCD insert
This is for galactic armory Hellbomb prop cosplay. you need to print 3 mounts. but i recommend you print 1 lcd mount to make sure it fits in your Hellbomb. it should fit in all 3 spots. the 2 parts are glue together after installing…
P
Printables
CORE ONE L lcd cover
CORE ONE L lcd screen surround replacement (taken from the Full CAD Assembly file) & added some simple text easy install by removing the 4 hex screws from rear of lcd (while its off) i used Prusament Orange PETG and its great to see the…
P
Printables
Angled external LCD mount for Mk3s
I just added a couple of pieces and cut them at an angle. I also reversed the slots for my use scenario. Thanks to the original author for including the fusion file, which I also include. Enjoy!
P
Printables
Core One Gap Filler between LCD and Frame / CoreOne Spaltfüller zwischen Display und Rahmen
At my Core One, dust and debris accumulate in the gap below the door between the frame and the display. This clip fills that gap.
P
Printables
ESP32-C6-LCD-1.47 Reference CAD Model
Note: This is a 3D reference model (dummy board) for CAD work, not a printable object. Accurate 3D model of the ESP32-C6-LCD-1.47 development board. Use this file to design your own custom enclosures, mounts, or accessories around the…
P
Printables
ESP32-C6 LCD 1.47" Mount
A clean mounting bracket for ESP32-C6 boards with integrated LCD display. Designed to be mounted into a project enclosure with the display facing outward through the cutout. Hardware required: 4× M3×6 self-tapping screws (enclosure…
P
Printables
Semi-Smart Remix for several LCD & OLED Screens and Digital LED Strip Lighting
Features and Functionality (updated 2026-05-08) v1.0.0: Added functionality: It is now selectable to run the heater (CYCLING) and get it controlled either by Temperature or by Humidity. When temperature has reached the target setting it…
P
Printables
Monoprice select mini v2 LCD cover
A cover for the lcd screen on the monoprice select mini v2.
P
Printables
Two Color Mk3/S+ LCD Knob (no MMU)
Put this together for a themed Mk3 rebuild, and sharing is caring. Things you'll need for assembly: -A little drop of super glue That stylish LCD Cover shown in the pictures is by BaGooN:…
P
Printables
Dot Matrix 8x8 LCD Stand
A compact and sturdy holder designed for DIY electronics and robotics projects.
P
Printables
LCD Mount Prusa XL
I dont have space in front of my Prusa XL, so i decided to mount the LCD on the side. BOM foam rubber 3 mm thick 4x T-nuts with spring M4 or M3 4x M4 or M3 x10 socket head cap screw Recommended parameters Nozzle size: 0.4 mm Layer height:…
P
Printables
Sidekick64 LCD Mount for Cartridge Case
This spacer is helpful to place the display of an Sidekick64 with the correct spacing to fit inside the Sidekick64 Cartridge Case by bigby: https://www.printables.com/de/model/122968-sidekick64-cartridge-case The spacer by JustinC144 is…
P
Printables
LCD mount for Raspberry Pi DIN rail case
This is a small bracket that fits in a Raspberry Pi DIN rail mount case available on Aliexpress. It only fits that Aliexpress case, which is available for Raspberry Pi 3, 4 and 5 (but be sure to order the correct one as each is different…
P
Printables
Lowe HF150 LCD Backlight Diffuser
Lowe HF150 LCD Backlight Diffuser This is a diffuser for illuminating the LCD on a Lowe HF-150 receiver. There is space for 2x3mm LEDs, one each end. I used two green LEDs in series with a dropper resistor powered the VBAT line. I printed…
P
Printables
Arduino project MQ135 & LCD16x02
Description: This is a model of a device that simulates how a sensor reacts to poor air quality and displays the data on an LCD screen. It’s a simple and educational project, ideal for learning the basics of air quality monitoring and…
P
Printables
ESP32-S3 4.3" LCD Case
Providing easy access to all ports, buttons, and the touchscreen. The model ensures a snug fit and robust protection for your device during development or final projects.
P
Printables
Canon XA11 LCD Screen Sun Hood
Description: This is a custom-designed sun hood for the LCD screen of the Canon XA11 camera. It clips onto the display and helps block direct sunlight, making it much easier to see your screen when shooting outdoors 🎥 The fit is made…
P
Printables
Kingroon KLP1-210 Riser with LCD and Creality Nebula camera holder
It so happened that I got a universal 7" HDMI touch screen with the printer, but it was without a mount and was just lying around, which was inconvenient. I also needed to monitor the long printing process and make timelapses, so I bought…
P
Printables
Darksoft Sega ST-V Dark Knight Multi LCD Selector Cart Slot Mount for Lions3 acrylic case
Darksoft Sega ST-V Dark Knight Multi LCD Selector Cart Slot Mount for Lions3 acrylic case (by Clint Kolodziej) This is a case for the Darksoft Sega ST-V Dark Knight multi's LCD selector, designed to attach to the cartridge cutout on the…
P
Printables
Cooler Master Elite Liquid Smart Screen Pump Cover (1.28" LCD)
Custom Pump Cover with Smart Screen for Cooler Master Elite Liquid (for 1.28" LCD/ESP32) 🛒 Required Components (BOM): Printed body parts (outer cover and inner mount). 1.28" Round LCD Display (an ESP32-S3 based module with Type-C is…
P
Printables
Open and lock slide lcd cover for ACER EMACHINES G520 I G620 | G720 LAPTOP
Open and lock slide lcd cover
P
Printables
SpoolSense Standalone Scanner Case (ESP32-S3-Zero + PN5180+ 16x2 I2C LCD)
This is a 4-part standalone enclosure designed for the SpoolSense project, built specifically to house an ESP32-S3-Zero , PN5180 NFC reader , and a 16x2 I2C LCD display . The goal of this design was to create a clean, desk-friendly…
P
Printables
Eggfinder LCD Case
Eggtimer Eggfinder LCD Eggtimer LCD GPS SS23E04 Double Toggle Switch 8 Pins 12mm Push Button Switch 18650 Series Battery Holder Multi-Cell 2S Type-C To 8.4V Step-Up Boost LiPo Polymer Li-Ion Charger 2S 20A 7.4V 8.4V 18650 Lithium Battery…
P
Printables
LCD1602 Keypad Arduino Bedienpanel – Zahlenschloss
Dieses 3D-druckbare Kombigehäuse macht aus einem 16x2 I2C LCD Display / LCD1602 und einem 3x4 Matrix-Keypad ein kompaktes Bedienpanel für Mikrocontroller-Projekte. Ideal für: Zahlenschlösser, Zugangskontrollen, Passwortabfragen,…
P
Printables
Case for RED DSMC3 Touch 7" LCD Monitor
Just made a simple case for the RED DSMC3 7inch monitor to protect it while traveling Tip : cut and tape a piece of paper inside to protect the screen from scratches
P
Printables
Nut and Bolt LCD Knob
Remixed Nut and Bolt LCD Control Knob for Prusa i3 MK3 printers. Print instructions Download. Slice. Print. Install. How I Designed This Remixed another design , made modifications in OpenSCAD, subtracted my Knob-to-Rotary Encoder…
P
Printables
Rotary Encoder Style Knob (~200%) for your LCD Rotary Encoder
Actions: Download Take this model for a ride on your printer. Make Don't forget you can earn Prusameters (free filament and other cool rewards!) for printing out models and posting a photo of your Make here on Printables. Modify If you…
P
Printables
Hand Knob for Prusa LCD Controller
Actions: Download Take this model for a ride on your printer. Make Don't forget you can earn Prusameters (free filament and other cool rewards!) for printing out models and posting a photo of your Make here on Printables. Modify If you…
P
Printables
LCD Display Cover
Just a simple screen frame if you don't like the stock front cover of the Anycubic i3 Mega. It might be an interesting thing to take a look at the "ironing" option within Cura to make the front of this screen frame look a lot cleaner. If…
P
Printables
Articulating Camera Bracket LCD Mount for Ender 3 S1
Simple bracket that provides a stable mount for the articulating camera mount (which is such a cool design). It uses the Ender 3 S1 original screen mounting holes and screws (or you can use shorter ones).
P
Printables
Drawers spacers for external LCD mount
I recently built the LACK enclosure for my MK3S and I really like the external LCD mount, but I also like the LACK drawers. But the LCD ribbon cables get in the way of the drawers, so I made this to solve that. This is a 3mm spacer with a…
P
Printables
MMU LCD cover for Original Prusa MK3.5/MK3.9
This is a re-upload of the Original Prusa MK4/XL LCD cover modified with PrusaSlicer 2.6.0, for use with the Original Prusa MK3.5 and MK3.9. PrusaSlicer 2.6 has some great features, including the text tool, which makes it very easy to add…
P
Printables
Fab Lab Siegen LCD-knob
The original design customized with the logo of fab lab siegen. For those who want to customize their Original Prusa with the logo of their local Fab Lab Siegen.
P
Printables
LCD SCREEN COVER PRUSA MK4/XL/MK4S/MK3.5S/MK3.9S/CORE ONE
The colour change is at the 1.80 layer at a 0.2 layer height with a 15% infill you can use the blank and Prusa and original Prusa covers for either the mk4 or the xl/MK4S/MK3.5S/MK3.9S/CORE ONE add a like
P
Printables
fender for the Prusa enclosure + holder for xLCD - MK4 / MK4S - remixed for original Prusa Flash Drive
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4. *** Update July 2024: I added a remix where the center piece accepts th flush xLCD cover by…
P
Printables
LCD 12864, LCD 12864A/B, Full Graphic Smart Display single part case
Single part case 12864 LCD Full Graphic Smart Display inspired from the great design of the "LCD MKS Mini 12864 Mount Enclosure Box Caja" by Campy : https://www.thingiverse.com/thing:2915718 BOM : 4x M3x12 screws (Don't tight too much the…
P
Printables
MK3 LCD cover with klipper logo and ERCF (3 colors)
Another design for the MK3 LCD cover with klipper logo and ERCF text.
P
Printables
Prusa Mk4 LCD Backcover Version A
This backcover protects the backside of the LCD and routes the wires more neatly. It requires reprinting of both feet and a backcover. Requires removal of the LCD screen, but this can be done without disconnection cables at the…
P
Printables
Ender 3 Neo LCD storage
This storage solution is mounted by placing it behind the LCD and aligning the holes, and then rescrewing it in I used: Printer: Ender 3-Neo Filament: Ender PLA Infill: 10% Infill pattern: Triangles Supports: Yes Support type: Regular
P
Printables
Wall frame for 3.5" LCD TFT touch display "ESP32-3248S035"
Frame The frame is as small as possible while maintaining at least a partial symmetry and some space for the wall mount. It can be printed face down without any supports or a brim, but the wall mount will need to be printed diagonally…
P
Printables
Prusa MK4/S LCD cover with knob. No MMU.
This model looks great in multi color. The gcode files have the color change built in. The minimal supports come off pretty easy. The 3mf file has print settings to achieve hexagonal second color. <<—Load as a “PROJECT”. If you like this…
P
Printables
LCD Button Resident Evil - Creality Ender 3 V3 SE
Since I'm a big fan of Resident Evil I thought I'd try my first design in Thinkercad and design a button for the LCD. I think there will be further modifications to the printer in this direction. Since it was very small it was very tricky…
P
Printables
Low profile / shorter MK4 LCD display mount supports (R2 version)
This modded LCD mount brings the LCD 1cm closer to the front of the printer, reducing the depth of the footprint by 1cm. This is a big help if you use something like a DELACK enclosure . Not sure why the standoffs were so long in the…