Waveshare ESP32-S3 Touch LCD Housing & Magnetic Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for Waveshare ESP32-S3 Touch LCD
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 640
- Wydruki
- 1
- Wyświetlenia
- 6245
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Waveshare recently released a new ESP32-S3 screen. Model name: ESP32-S3-Touch-LCD-4.3. I'm using this screen for my openHASP installation. You can find .ini file here. I didn't have courage to do the soldering job for backlight as explained in the link. So backlight and dimming is not working with this screen.
Upgrade your Waveshare ESP32-S3-Touch-LCD-4.3 experience with meticulously designed 3D printed frame and stand.
Crafted with precision, this custom accessory boasts tailored cutouts for seamless access to essential ports including USB, UART, CAN, sensor interfaces, I2C, RS485, and PH2.0 battery connectors. Not stopping there, I've incorporated button accessibility for enhanced usability.
This magnetic stand offers not only stability but also flexibility, allowing for optimal viewing angle. Whether you're tinkering, prototyping, or simply exploring the capabilities of your ESP32-S3 Touch LCD, this custom frame and stand combo will elevate your experience to new heights.
No supports needed.
Bill of materials:
- 6x 15x3 magnets
- 4x M2x12 screws
- 4x M2.5x8 screws (optional to connect back cover to screen
- 4x Standoffs which come with your Waveshare screen
- 10.000 mah battery (optional if you want to use with battery)