Flashforge Adventurer 5M Touch LCD screen cable socket FIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Disclaimer: I'm no engineer. I came up with a fix for the 5M LCD screen socket connector.
- Ocena
- 4,909 / 5
- Polubienia
- 96
- Pobrania
- 1241
- Wydruki
- 6
- Wyświetlenia
- 5315
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a fix for broken for the Flashforge 5M that are notorious to be fragile and break. This can be printed out. It fits under the back cover to hold it into place and is just a bigger version of the original design. You will have to remove the back cover to install. Depending on the accuracy of your printer you may have to clean out the holes or sand the post a little to fit. On the edge of the socket buckle you may have to shave down the edge that fits against the cable ribbon for clearance to fit snug. It may be a hair too long. Anyway, hope this helps people out and save some money so you don't have to replace the screen. ENJOY!