Liczymy pasujące modele…
Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394
Holder for a WISRELEC T-Type Fixed Torque Wrench The others that are online don't allow you to contain all items include
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
The top backrest mount of my chair broke, I think the design is flawed. This part replaces the original mount and moves the backrest a little further back so that it rests on the “spine”. Print with 100% infil, doesn't really matter what…
A shallow tray to store your iFixit Mahi 1/4" Bit Driver in position for instant grabification. Pictured is an older revision of the ⅔ height version. The models have since been modified to increase tolerances in problem areas. For…
If you have an older Danfoss thermostat with broken tabs, this model may help repairing the thermostat so you can use it again. If any of the tabs remain, you will have to cut them off and grind/polish the surface the tabs was on. On the…
I needed a template of the fixture plate for a Harbor Freight Bauer drill press to model up work-holding solutions.
Bike front rack compatible with Klickfix Recommended to print with ASA or ABS. So far doing some stress test it support 4-5 KG in movement. (was used in regular off-road terrain)
All credit goes to theamzngq, and his models. I found that this stl had a pretty large gap between the base and battery post
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
The **FixBox** is the ideal desk-sized organizer for electronics enthusiasts and professionals, designed to keep your repair tools neatly arranged and readily accessible. With its spacious compartments and sturdy 3D-printed construction,…
Fits v4.1 of the OmniFixo clips which are slighly bigger than the more recent versions.
Fixing the CR Touch Error on Creality 3D Printers Hello everyone, Recently, I encountered the common CR Touch error. After extensive searching on the internet and trying all the suggested solutions, I unfortunately didn’t achieve any…
Changed the windshield rim/frame, bottom side is 3mm wider and top side is original width or change as you like (provided step file).
Remeshed for a friend as it was crashing Prusa Slicer. Too many manifold edges in the original
The original model had too small thread for the fitting, this model fixes that
Side hook for IKEA BROGRUND towel holder. You will need one M3 square nut and one M3x12 screw . Printed in Petg with a solid part where the screw is inserted (as shown in the .3mf file).
Mounting Brackets for Lamp Socket Light Fixture Quick fix for broken ceiling light clips. They worked great. These were to fix the clips on an LED kitchen light. They hold the glob with no issues.
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Honeycomb Storage Wall Mako driver set holder with tweezer storage. Logo has been removed from original.
Why When determining the maximum flowrate for a specific hotend/filament combination I always use the poop method , in which blobs of filament are extruded and weighted to assess the capabilities of the setup tested, but this time I…
Introducing the FDM (Fixum Dude Motors) print in place FedEx package delivery truck. Find the other companies' delivery trucks and the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315 Prints…
I made it with multicolor, it looks much better that way. Should I make a curious light crucifix?
Special creation for an outdoor vivarium, exposing as little surface as possible for animals to hold on/climp to. Screw holes for surface mounting included, as well as some basic vent holes. Print in PETG (at least) to accomodate for…
I liked the cup holder that VersusMakes published. But when I added my tall bottle it would turn and drop. The bottle dented and the cup holder broke :( So here's what i changed: changed clamp so its at a fixed 40° angle → the holder…
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
EN:Store your pods with ease. The attachment can be done with a hook (which won't damage your stand) or with screws. If you prefer, you can customize the attachment with a generic 3D model provided to add a magnet, for example. You can…
As i wanted to connect my tumble dryer directly to the drain, I bought a kit with a pipe that has to be fixed on the back of the tumbler. There is a screw on the left back of the tumbler which can be unscrewed to attach a part from the…
Recently, I came across this nice bag on Aliexpress “Double Layer EDC Pack Men Tactical Molle Waist Belt Oxford Hip Pouch Fanny Pack Camping Hunting Accessories Utility Bag” and bought two of them without knowing how I will utilize them.…
Keep your precision screwdrivers organized and easily accessible with this custom-designed screwdriver mount/holder, perfect for IKEA Skadis pegboards. Designed specifically to fit the iFixit screwdriver, it also accommodates other…
I purchased two Razer BlackShark headphone for my kids from BestBuy. They were not cheap. Sadly they both broken with in a week of each other. After looking at them, they had both broken in the same spot. Thankfully, I was able to…
I have a Regalo baby gate and the lock mechanism snapped after a few months of use. I tried glueing it and that worked for about a month then it broke again so I decided to model the part in fusion 360 so it's a better fix.
i'm using it for about a month in tough condition and all looks well. printed with tree supports. you can disable supports for the finger grips, it's not needed.
Falcon2 Pro Collection These are instructions as part of my Falcon2 collection. The model is just a placeholder. The Creality Falcon can ship with a gantry that is not fully square. I had to perform the following to square the gantry by…
Falcon2 Pro Collection These are instructions as part of my Falcon2 collection. The model is just a placeholder. I needed to ensure my laser head is perpendicular to the surface where my material will sit since I plan to cut pieces of…
Simple accessories part for your bags in the trunk of your car. Very handy piece of plastic which is small and easy to manipulate. Bottom part is glued by dry zipper. Recommend to print it with PETG and comparable high temperature…
Adapter allows Solar System Lithophane collection using m75x4 threads to be mounted to 4 inch ceiling light fixtures using e26/e27 LED bulbs. Both parts can be printed without support. The adapter allows for rotation of Solar System…
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
Bracket for wall mounting with M4 countersunk screws
I tried to use usb cable fixer on printables / thingiverse, but I could not make the cable through the hole.
Our "Reishunger" rice cooker has a poorly designed drainage for condensed water. The water is supposed to end up in a small container, but it just runs down on the side of the cooker. These reducer pieces make it actually work by creating…
The original model has some weird mesh overlaps and cavities that causes cura to have strange gaps, so this is a fixed version that is completely solid. In all other respects this is identical to the original
If you need a pic-rail-mounted stock, you've got lots of very modern options. But if you want something a bit more classic from back when stocks were whittled from logs or molded from beaver puke, the pickings are slim. So I made this.…
Pièce conçue pour remplacer le support de maintien d’origine du SteamPod (fer à lisser vapeur), fourni avec le modèle vertical. Elle se fixe directement sur un cintre en bois à l’aide de deux vis. Idéal pour retrouver une solution…
This is part of the BLV MGN Cube printer. This is necesary if your extruder is Direct Drive, and BMG model. See notes. It was made to align the BMG extruder with the E3Dv6 input. (they were missaligned) Print them in PETG, 90% infill…
So the original model has the support piece a bit higher, which can interfere with PCB Klicky. This fixes it. Move the metal support rod around 10mm down!
Hawse Fairlead with adjustable fixing slot 254mm/10" Passacavo per verricello Overall dimensions: 300x67.5x18mm Centre to centre 254mm / 10" Standard Bolt Mount Pattern with adjustable fixing slot Mounting hardware needed M10 / 3/8" bolt…
Just a handy small piece which allows to mount a Headlight straight to the BBB Stems that are compatible with the GoFix Mount from BBB. Listed models on BBB website: BHS 09, 37 und 38Di2 but also fits the Actionstem BHS-52 as you see For…
Replacement for ceiling dryer. To replace caps and rings. Use PETG
For me, the middle gear connecting to the cam did not move far enough down. So I redesigned the middle gear, try it if your handheld sewing machine stops working. Print at 45 degrees or it will break (PLA). Just open the machine up and…
Piquets de fixation pour câble périphérique de tondeuse robot PETG 2.0 1.75
Wall holder for the iFixit Mako Precision Screwdriver set, using 3,5 mm screws. This design is a remix from iFixit Mako Screwdriver Mount for Ikea Skadis
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips Hair Clipper? Print yours now. Simply click it on & clip your hair with precision. About Philips Fixables Fixables is a collection of 3D printable…
English: I previously encountered a Gravitrax snowflake model with a 2.8-star rating, criticized for flawed design. I printed it to challenge these assessments, yet replicated the same design flaws. Consequently, I submitted a 2-star…
This is a hard mount designed for printing in PETG. Do not use a soft mount with the Moonlight, as it will significantly worsen jello artefacts. Switching to a hard mount will resolve this issue. The holes have been adjusted to allow the…
IMPORTANT: The machine this model is used for is made by the awesome sauce Futtawuh! If you have somehow stumbled here not knowing what that machine is check it out on his github or on printables . Instructions: You are gonna need one…
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I added a recess for the AC adapter so it stays put.
EN Does your Hyundai i20N (model years 2020-2024) suffer from an annoying rattle coming from the back seats, especially when driving over uneven surfaces? You're not alone. The source of the noise is excessive play in the factory plastic…
This is a case for the little test board. There are two versions of the top. I configured my board with the top left connector shorted, the top right connector has a 50 ohm resistor, and the bottom two connectors are bridged. I use these…
Just a fix for the closing clip/latch. It inserts into the first part of the spring. I had to file down mine, it didn't fit for the first time. I used i bit of hotglue, because i filed it down a bit too much, but i think press fit is just…
I made this remix because the original had parts between the letters that did not stick to the actual keychain, making them useless. I simply added some walls to connect them where necessary, so now your aperture logo will not have void…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl this is a preliminary description (i will update the pictures as soon as…
ich habe momentan keinen 120mm lüfter da also habe ich es geremixt das man auch einen 80mm radiator verbauen kann. Es gibt 2 Variationen eine die das Netzteil und das SSR und das Netzteil belüftet (v4) und eine Version die nur das…
This is a remix/repair of the 90-degree vent hose model from RobertCowen for the Xtool P2 and P2s. The models that he has posted for this specific part have artifacts present in them that stop both the 3mf and STEP files from printing…
My Cardridge cover on my switch was loose sind the plastic was broken, so i designed a small fix which fits into the headphone jack and holds the cover in place. It also functions as a dust cover.
In red or green you see my prototype (PLA). Final printing in PETG. The one in green needs to be printed on the side to make it stronger.
Looking for strong, reliable, and easy-to-print caster wheels for your next project or piece of furniture? These heavy-duty casters are designed with strength and simplicity in mind. Easy Mounting Options – Secure with screws for…
Holder for iFixit Mako Kit for attachment to an Ikea Skadis pegboard. It uses special pegs designed by @KimJanosch. These can be found here: Skadis/ SKÅDIS universal peg
I had to redesign the model, because the magnet positions on my iFixit Mako case, are different. Additionally I opted for the Rail-Pop Ins, which I really like for their secure connection. If your magnets seem too weak you can stack two…
halloween tree I'm kinda being silly but I thought I'd take a stab at a “ fixed” remix of the original. Technically the hollow original might be handy for resin printing but your slicer software can do that too. I think that cleaning…
This clip is specially made to fit with Lidl Powerfix Pegboard Tools SDK by ppeterka | Download free STL model | Printables.com types of hangers They're really small so I recomend to plint in a lower speed
UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…
Elevate your laser engraving workflow with this WeCreat Lumos Business Card Jig , designed to engrave three business cards at once with precision and speed. This jig is engineered to fit securely into the WeCreat Lumos void , ensuring a…
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
This Spacer is a functional part essential for mounting the Orbiter V2.0 Extruder onto the DragonBurner Toolhead (specifically used on a The100 Tank printer build) The primary function of this part is to correct the axial alignment…
A model of a 1968 or "Toob" ACA hurricane & ACA HURRICANE 130 MK1 that can be put on a Lego axle (file is now fixed)
W wielu modelach BMW pęka plastikowy zaczep linki klamki wewnętrznej – przez co linka wypada, a zamek przestaje działać. Zamiast wymieniać cały mechanizm, przygotowałem prosty uchwyt naprawczy , który pozwala solidnie zamocować linkę z…
There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…
i really hope i come at least twentieth because i'm really bad at designing and coming at least tenth or something is my absolute dream.
Dual Business Card Engraving Jig – For Fiber Laser Setups Looking to engrave business cards more efficiently? This dual-position jig is the perfect solution for streamlining your workflow and achieving consistent, professional results.…
If you're restoring or repairing a Minolta XD7/XD11, you might need to remove the film indicator window in order to better replace the original grips/leatherette. This involves cutting the plastic nubs that go through the door, as the…
Knob / Cylindrical Fixed Handle - Impugnatura fissa cilindrica M6/M8/M10 Metric thread M6x22mm Thread M8x22mm Thread M10x22mm Thread DIN931 M8 DIN931 M10 All our designs are free to download and use—because sharing drives innovation. Your…
Artful From DIE OF DEATH. Print in PETG like my man Mr.Make_It says you should. Second figure to have accesories without update to add them (First was Nosoi Vessel and Tree). You can print “Implement” and “CopyWrite” in PLA. 12/16/25 UPD:…
THIS HALF-BAKED REMIX HAS BEEN SUPERCEDED. USE THIS ONE INSTEAD: //////////////////////////////////////////////////////////////////////////////////////////////////////////////// This is based on Thingiverse #4867466. The original has a…
This shift dial helps correctly position the idler pulley assembly. On some ACE Pro units, a small tolerance issue can cause the idler pulley to sit at a slightly incorrect angle, leading to repeated Error 11518 (filament clogging). A…
Simple Design to have your Notes&Pen attached at your fridge. I use 3 Pc. 10x2,5mm Round Magnets at the back to attach at any magnetic Plate. Print Settings Filament Material: PETG Notes: If you dont want to use the build in support, just…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to mount the Klipper Chroma Module (KCM) onto the printer. This bracket is designed to fit where the LCD screen…
Super Aufbewahrung für einen Pelikan Griffix Zirkel. Die Box hat eine Vertiefung mit ca. 10x20mm, in diese wird ein Schleifpapier geklebt damit der Zirkel jederzeit gespitzt werden kann. Der Deckel rastet bei geschlossenem zustand ein. In…
A 30° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective horn on top, and a rear antenna…
Print this base and use logo and mindflayer models from the original model. Changes in this base relative to the original: Added a chamfer to the lip that holds the logo in place, so that it can be printed without supports Sliced the…
My new TL-SG105 doesn't fit the original mount downloaded here. Vendor design changes perhaps? The original mount peg positions are 14.33mm too far from the tab border and are also too big to get through the “+” holes on the switch. What…
My third model. Nice little fidget, bring it to school, put it in stockings, very simple.
Wanted to mount my screwdriver set to my wall, so I did. and now you can too :)
