Liczymy pasujące modele…
i finally got sick enough of needing a flashlight to see printed material behind where the toolhead happened to be that i decided to do something about it. none of the other models i found suited my needs, so i made my own using parts…
Переделка оригинальной зашивки от Flashforge . Все панели печатные, так же добавлено боковое крепление для катушки, интегрирован датчик температуры и влажности, добавлена панель под 4 сенсорные кнопки для управления различными функциями -…
I was having issues with the front corners of magnetic build plate lifting up during prints that span most of the plate, so I made this clip to hold the front corners down. The hole on the bottom of the clip is so it attaches itself to…
Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…
One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
This is an improved Riser for the FlashForge Adventurer 5M Pro. I made the fit better and removed to tab slots that didn't work for me. The front sides have 2 x 5mm dowel holes and 2 dowels. The rear sides include the 3 rectangular plugs…
Printed with ASA and 0.4 nozzle with 0.2 Layer height.
i finally got sick enough of needing a flashlight to see printed material behind where the toolhead happened to be that i decided to do something about it. none of the other models i found suited my needs, so i made my own using parts…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
The standard chain starts to sag and beat against the case over time, so I decided to print myself a new one, however, I prefer the simplified drag chain termination and I would like to use the spool holder from @design8studio in the…
After printing the enclosure for Adventurer 5M I hit the infamous problem of filament sensor which is not working in reverse direction. I disassembled the sensor to figure out why this is happening. It turned out, that the metal bracket…
LED strip mount for Flashforge Adventurer 5M https://www.printables.com/model/1339050-channel-for-the-led-wire-fa5m https://www.printables.com/model/1339884-xl7015-led-ffa5m
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of blocks that can be used to recreate the Adventurers Jungle…
HOTEND HOLDER for Flashforge Adventurer 5M / 5M Pro It sticks to the wall with double-sided tape
This character is my first attempt at hand sculpting a model in blender. The only help I used was MWSculpt's pose rig as a base. I have uploaded 2 models, one with a base, and it should print with a 32mm base if you import it directly…
If you have a Flashforge Adventurer 5M, you likely noticed that there are bays in the back for a filterable exhaust. I didn't really feel like going down a rabbit hole of hooking up fans to the printer's power supply, as I just got the…
Flashforge Adventurer 5M Pro – Toolholder This print in place toolholder allows you to store your standard tools neatly on the side of your Flashforge Adventurer 5M Pro. No glue is needed: everything just clicks together permanently. Fits…
Original Idler Bracket for Flashforge Adventurer 3 Y-axis / Bed. Reverse engineered with manual measurement for upgrade purpose Recommended Print Settings: Material: ABS Infill: 100% Assembly Guide This part can be found near the rear of…
Overview The stylus was the best stock print of the Adventurer 5M, but it was only in gcode form. A redesign will fix that. Why not use the stylus for everything? Printing Nozzle: .4 Filament: PLA | PETG Layer Height: .2 Build Plate…
This dust cover is designed for the Z-axis bearing on the Flashforge AD5M (Adventurer 5M). It may also be compatible with the AD5M Pro, but I don’t have that printer to verify - your feedback is welcome. Based on feedback from other…
Guard plate b1 and b2 now can have metal hinges mounted with m3 screws and nuts aliexpress hinges: https://it.aliexpress.com/item/1005006171879918.html?spm=a2g0o.order_list.order_list_main.5.22793696tWxJ7x&gatewayAdapt=glo2ita
I remixed the drag chain link to increase the diameter of the hole from 3.55mm to 4mm to give enough play in case of using printer which is not printing the hole accurately enough. I decided to do this because my printer was not…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! Supports are needed. I suggest organic trees.
This heating pad is designed to create an active thermal camera in the Flashforge Adventurer 5M printer. In addition, a module for filtering air through a carbon filter has been added to the heating pad. Print from ABS(ASA)-CF(GF), or…
This model is a small-sized tool basket for the 5M Pro. The hangers should be rotated on their sides for printing as well as have small supports for the hole. I made this basket to hold the FlashForge adhesive stick, a small 30mm diameter…
Das ist der passende Deckel Für den 3D Drucker Adventurer 5m
⚠ Important There are different versions of this cover. I've managed to identify three variants so far. If you have information about others — please share detailed photos and measurements. You can also remix this cover using the STEP and…
Carbon filter made of ABS plastic. The model was superglued together. I used a special non-acidic charcoal AP-A 2-3 mm thick. I was not satisfied with the options available now for 5015 or 40x40. Moreover, all the air with dirty particles…
🔧 IFS Bracket – Flashforge Adventurer 5X / AD5X A simple mounting bracket for relocating the IFS (Intelligent Filament Sensor) on your AD5X. This model is designed primarily for modders who want to move the IFS to a different location —…
⚠ Please note: So far, I haven't had time to print and test this model myself. If you run into any issues — please leave feedback so I can improve it. 🧾 Disclaimer Before working with any electrical components, make sure you fully…
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
Eufy Indoor Cam Camera holder for Flashforge AD5M without an enclosure. Prints without supports
Brush Cable Grommet for AD5X Flexible brush-style cable entry for heated bed wiring — clean, durable, and easy to install. This model is designed to guide heated bed cables through the printer enclosure panel. It helps prevent cable…
I could not find any nozzle cases that fit the Phaetus and off-branded nozzles so I remixed Doug Joseph's nozzle boxes to fit these different nozzles. Printer settings are the same as the original. 10% infill on lid 15% infill on base 2…
На данную площадку можно наклеить два куска светодиодной ленты 20 см и 25 см. Лента самоклеящиеся, но я накапал еще немного клея, что бы лента не отклеилась.
added the whole stl or halves, mine printed the halves then glued together instead of messing with supports in the ducts
This is a top mount spool holder for the FlashForge Adventurer 5M Pro This model specifically holds the lid open, it is designed for making direct feed filament, like TPU, easy to print. It utilizes my own Double Sided FIller Guide which…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
This is a mounting bracket designed to fit the base of the Flashforge Adventurer AD5X (5M/Pro) . The primary goal of this model is to provide a mounting point for status indication (when using addressable LED strips like WS2812B/COB) or…
The mount has sufficient clearance where it connects to the chain, allowing it to move slightly, reducing stress on the wire during printing. Enjoy!
The mount is attached to the standard holes of the printer on the left side using two M2.5 self-tapping screws. Chitu H2 can be installed into mount's grooves then. It is recommended to use double-sided tape. Recommended material: ABS
This Steampunk Explorer Captain is a bold adventurer from an age of brass machinery and mechanical innovation. Equipped with a detailed steampunk outfit, the captain wears a leather coat reinforced with metal plates, mechanical goggles,…
This print raises the display a few millimeters to allow clearance for a custom front door. It also tilts the display back for easier reading and operation if you are tall or the printer is on a low table. Printing instructions This part…
Here's the remix of my HGX 1.0 extruder for ff5adm based on HGX 2.0 gears. But you'll still need HGX 1.0 main gear, because it's longer than 2.0. Or you can print it from nylon (PA) or POM with 0.2 nozzle if you can. I tried, but my…
Love the light headcap to match the light cooling fan duct. BUT I wanted a spot to put the bowden tube when I am printing TPU... yup... remix time ;)
This just adds a chamfer to the lower edge so it does not hit the printbed handle when leveling. You'll need 2 5x3 magnets. Works with stock, aftermarket and Phaetus hotends. Use tree supports and turn on Support critical regions only in…
I liked several of the build plate holders on the market... but I bought 4 build plates... so... I needed more space... just designed my own. I wanted to pull them out forward, not up, so there is a small lift (12mm) to hold them secure,…
There are many filament cutters for the FlashForge A5M on here, but none fit my needs. The Lighweight Cooling Fan Duct I remixed adds a perfect spot in the front to put a button to cut filament, and the Lightweight Headcap I remixed takes…
Modified chain to body mount (Модифицированный крепеж цепи к корпусу) Flashforge Adventurer 5m
This is a printed lid for the AD5M enclosure kit that includes a mount for a 120mm fan. Idea being to then add a duct and direct exhaust air safely out a window or something when working with ABS or ASA. I printed mine in 0.24mm, with 3…
Now it weights the same 41 gramms as original FF Extruder
I don't have a lot of space for my operation currently, and needed a way to store currently unused nozzles without taking up a lot of space and offered proper protection. This container is easy in and out, and shows the nozzle orifice…
This is a poop chute for the Flashforge Adventurer 5X aka AD5X newer version, wider and extended with custom bin that allows acces to power button, passtrough for power cable and room for Lan cable. Easy installation, large bin, no…
Rear parts of the top case with the possibility of installing hinges and a flat lid handle. Plus a drawing indicating the locations and dimensions of the holes for attaching the hinges to the lid. The hinges used are the same as those for…
Panels, door, and top in two versions - solid and with holes for gluing acrylic hexagons (circumradius - 49.99 mm). If using the hexagon option, mine fit tightly, so if you cut them, cut with a radius of 49.9 mm. You can cut exactly in…
Flashforge Adventurer 5M Enclosure remix back right for spool holder cutout
Flashforge Adventurer 5M Enclosure remix top left for spool holder cutout
The original filament holder on my Flashforge Adventurer 4 Pro would wobble and skip randomly. Their are two version to select from, both work with plastic/cardboard spools. v.1 40mm x 82mm cylinder with 2.0mm edge universal spools v.2…
I modeled the the drag chain clip as seen in the instruction manual for the Flashforge Adventurer 5M DIY enclosure . Drag chain clip This was designed to fit with Lauren Mills' drag chain model . I used a 16mm M3 screw for the drag chain…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
I created this camera mount for the Flashforge Adventurer 5M. The camera I used is an Arducam, but this will work with most 38x38mm camera modules. Installing Camera to Mount: This is designed to use 4: M2 screws to attach the camera to…
These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…
Recommend using a brim. STL is already oriented ready to print.
DESCRIPTION Much thanks to the creators of Honeycomb system, and the Flashforge Enclosure, for making this remix possible, the links are included in this profile. Codename sidekick is ready for unveiling. All pieces are printable on the…
A button with a lock was inserted into the camera casing, taken from the site, to turn on the backlight from the front panel. A channel for wiring is made along the inner wall. (panels B and C) In panel D, the outer corner is cut off to…
You will need 12032 fan (basically 4 pin, but also you can use 2pin with config edit), some nuts and screws to attach fan. I mounted the fan with a double sided tape. The only tricky part is to mount upper part. It must be about 1.5 mm…
When printing models that cover the majority of the bed sometimes they will adhere to the plate, but the plate will lift in the front corners. This simple model will help hold the plate down. I attached it with Velcro strips to prevent it…
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
The "membrane" model prints holes on bridges better. They must be removed with a knife or hot soldering iron. M3x5mm (OD 4.5mm), fan - 2x M3x5mm (OD 4mm) and/or 2x M2.5x5mm (OD 3.5mm) Category: 3D Printer Parts
Improved version with display installation from the inside (without frame). _____________________________________________________________________________ Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose…
Part for manual belt tension adjustment FF AD5M. Made for 20+mm M3 screw and M3 nut.
The strings are used from commonly available AA battery holders. They are fixed in the holder with rivets.
Trays for the most necessary tools (and small plastic waste). The base is installed to the left (and right) of the printing table on a thin double-sided adhesive tape, close to the back and side walls (glass). The tray itself is embedded…
Remixed from design8studio design to re-orient filament sensor - fixes filament reloading issues
Slice them up however you may need in order to print! It can be sliced in quarters and be printed on the 5M. They have plenty of spots that are thick enough to accommodate a peg. Magnet positions are also present. I do not remember what…
L'adaptateur et 2 partie le support et une pièce qui sécurise et permet ensuite le serrage. Il faut le rail Vixen pour pouvoir l'utiliser.
I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…
PTFE filament tube guide for adventurer 5m. For assembly you need M3 screws and a 608z bearing. I also attached .STEP files if you need to make a version for the bearing you have.
Print with support below the hooks end. PLA works fine until now
Printable block off plates for the standard AD5M model to help trap heat efficiently with the enclosure kit by FlashForge.
Overview Need a custom toolhead cover? Maybe your original was damaged? Take your pick of chamfer(sharp edge) or fillet(round edge) from the designs I have made or if you do not like them I have included the parametric source file for you…
Gnome Cat Adventurer Open mesh to adjust and play with, please give credit UPDATE: 10/16/2024: Corrected Hollow body on short in slicer Tall body, added some modifiers to torso, cant figure out model at the moment, please bare with me
Neat, easy to print enclosure with 4 mm (or 3 mm) polycarbonate sheet panels. The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 750 grams of…
Spool holder for 5M printer. Can route filament behind printer into the no filament detector. No modifications needed. Print on side and use supports if needed.
Переделка оригинальной зашивки от Flashforge . Все панели печатные, так же добавлено боковое крепление для катушки, интегрирован датчик температуры и влажности, добавлена панель под 4 сенсорные кнопки для управления различными функциями -…
I've remixed this from the original one-piece model I found and sectioned into 4 pieces, 2 pieces per plate, this lid riser for the Flashforge Adventurer 5M Pro. Without the riser, the filament tube rubs on the clear plastic lid. I had…
You would need a pair of M3x30mm screws
Complete enclosure as tiny as possible and with multiple opening options. I didn't like the official enclosure as I think makes the printer very big and has some kind of a toy appearance. Original metal frame at sight (not bigger than de…
needed a tray for all the extras i have next to my printers. simple tray for the front of the 5m pro. it slips right on and will hang with no problem. auto support works good. .2 profile. nothing special.
One scale division corresponds to a key rotation of 5.14 degrees and a height change of 0.01 mm (for M4 screws in increments of 0.7). You will need an enlarged washer M12 (DIN9021), an open-end wrench 7 and a hexagon from the printer kit.…
Overview A re-imagined side mounted spool holder for the Flashforge Adventurer 5M. This design fits over your existing enclosure piece “D1”. A 4mm x 10mm bolt might be needed to replace the existing bolt in the guard plate, although I was…
I really like my Skywatcher Star Adventurer tracking mount, but with funds and space being limited didn't want to drop yet more money on another tripod for astronomy/ photography. Testing showed my normal photography tripods were too…
