FlashForge Adventurer 5M HSW Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adventurer 5M Enclosure Risers with Honeycomb Storage Wall.
- Ocena
- 5 / 5
- Polubienia
- 402
- Pobrania
- 1222
- Wydruki
- 7
- Wyświetlenia
- 14 798
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
Honeycomb Storage Wall has been added to the side of my existing Adventurer 5M Clean Riser Set. Mix and match them for a truly unique look. The adjustable angle on the screen has been removed to attach the screen much more firmly than the original.
If you do not know what HSW (Honeycomb Storage Wall) is, read about it here. You may need different inserts and add-ons from their page to complete your HSW experience(Specifically inserts). You may also search HSW to find huge amounts of add-ons for the honeycomb storage wall ecosystem.
The official enclosure kit is required to complete the enclosure which can be found here. The official instructions can be found at that link or down in my files section for quick reference.
Printing
I always have the best luck printing the risers upside down with auto supports. The B riser is very difficult to get situated on the build plate, I advise using skinny trees and manually placing them on each honeycomb on the bottom row closest to the build plate.
Nozzle: .4
Filament: PETG
Layer Height: .2
Supports: Yes, organic or slim trees on the build plate only.
Take a look at my Adventurer 5M Screen Bezel with Stylus Holder or any of my other Adventurer 5M Add-ons
Like my work?
Like the model
or