QIDI X-Max for MKS-Pi Klipper Screen TS35 Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you want to replace the original screen with the MKS-Pi TS35 screen, use this file
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 97
- Makes
- 1
- Views
- 3,050
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This Adapter is for all QIDI users who want to upgrade to the MKS-Pi system for using Klipper in the future.
You can order this system on amazon here: Makerbase MKS-Pi with preinstalled Klipper
To add the screen to your X-Max, you also need a longer, at least 1m long ribbon cable which can be found here: 300mm extension cable 24p 0,5pitch with an extension adapter
Preparing:
Use 4 heat inserts with max. 5mm hight and place them on the back of the display adapter.
heat inserts can be found here: Heat inserts M3x5x4
Assambling:
Disassamble the side parts of the X-Max as well as the front.
The Display is mounted with 4 screws. Take it off and place the TS35 adapter instead.
Place the display inside and mount it with 4 screws to the adapter as well.
The ribbon cable follows the way of the old ribbon cable.
Installing the MKS-Pi Klipper:
Follow the instructions on github:
by logging in with command prompt, use “ssh mks@[your ip adress]” password: makerbase
For installing a proper version of Klipper Follow the instructions of NexGen:
How you get the Klipper system running on your QIDI printer is explained here:
Printing instructions:
Print was done with Prusament ASA Galaxy Black But you can also use Extrudr ASA Black
- Supports: no
- Perimeters: 2
- Infill: 30%
- Top/Bottom: 1 mm
Smooth it if you like with acetone.
link to my smoother is here: Acetone Vapor Polisher for ABS and ASA prints
Als Amazon-Partner verdiene ich an qualifizierten Verkäufen