Counting matching models…
Case for the MKS DLC 32 v2.1 board and the MKS TS35-R display. The tube for wires is used with a diameter of 12 mm Корпус для платы MKS DLC 32 v2.1 и дисплея MKS TS35-R. Трубка для проводов используется диаметром 12 мм
I could not find a ready made case, so I decided to design something by myself the case is for the Makerbase MKS TS35 V2.0 touchscreen (shipped with MKS robin nano V3) it is the one with a control button but no reset switch maybe someone…
Used material: 6x DIN 912 M3x10 - 4x for TFT, 2x for cable winder 4x DIN 7380 M2.5x6 for MKS-Pi (or any other similar screws) 10x M3 heat inserts - 4x for TFT, 2x for cable winder, 4x optional for mounting. I plan to add MKS-Pi + TS35 on…
Work in progress
This is the case and the mount for MKS Pi-TS35 TFT Screen on Voron 2.4R2
Simple articulating mount for the Makerbase TS35 v2 screen (with encoder). Mounts as a replacement for the tower top cap. I'd suggest X tower, since that one is the closest to the mainboard and only one actually close enough to reach with…
I switched my ender to klipper because a raspberry pi is just too expensive and the sonic pad is a "rather" closed system (at the time of my upgrade, it could change), I selected the solution of MKS. Since the layout of the raspbarry 3 is…
This is a case for the MKS Pi touch screen with hinge for mounting to extrusion. I created this to add KlipperScreen to my SuperRacer, which has the Pi in the top, using this mount . You can mount it to the frame with a 2 or 3 M3 screws…
Case for MKS DLC32 board and TS35 screen for TwoTrees engraver TTS55 or TT5.5S. You need : - 2 screws M3x10 for frame 20x20 mount - 2 Tnuts M3 for frame 20x20 mount - 7 screws M3x10 countersunk head - 8 screws M3x5 for the board and…
PET-G Prusa Orange Layer 0,2mm 3x perimetr Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Notes: PET-G Prusa Orange Layer 0,2mm 3x perimetr Category: Electronics
Box for MKS DLC32 board with box for TS35 LCD display. I use it for my laser. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Plastika Trček PETG any Category: 3D…
Case for the mks pi ts35 lcd.I drilled the holes for 40x20 or 20x20 profile. It was created in Fusion 360 for use in a corexy that I built myself.It worked without any problems.
Screws that you need: 4x M3x10; 4x M3x15; 4x M3 Nuts; I have printed with PETG, but also PLA is good.
for Kingroon KP3S Pro V2 LCD link (MKS TS35 LCD) https://ko.aliexpress.com/item/1005004545952372.html?spm=a2g0o.order_list.order_list_main.12.1c46140ftQM0RC&gatewayAdapt=glo2kor https://youtu.be/TQIzUf1kfEM
This mod doesn't require any additional parts beyond what's in the original Bill of Materials (BOM). The parts have been designed to accommodate the original logo inserts. Printing instructions STLs are oriented correctly No support…
Компактный корпус для размещения сенсорного дисплея TS35-R (без ручки) размером 121х76х23 мм для крепления к конструкционному профилю 20х20 или 20х40. Данный дисплей работает с платой DLC32, которая работает с чпу и лазерными граверами и…
I made it for my build of a Laser Engraver. It was printed without support on Ender 3V2.
I've created a mount for the MKS TS35 touch display which comes with the MKS PI. When the MKS PI is mounted inside the case it's pretty useful to have the display attached. It also comes with a stylus holder and stylus. To mount this you…
This Adapter is for all QIDI users who want to upgrade to the MKS-Pi system for using Klipper in the future. You can order this system on amazon here: Makerbase MKS-Pi with preinstalled Klipper To add the screen to your X-Max, you also…
This is a case for mks ts35 display, i made two versions, with hole for encoder and other without, and i not test fit de back side. Any sugestions i repair the model. Print Settings Printer: FlyingBear Ghost 4S Supports: No Resolution:…
The back has been modified to accommodate the bracket created by Oleg Romanov. The screw holes have been adapted to fit the new bracket. I've also enlarged the holes in the piece that rests on the profile to accommodate the M5 screws.
Creality K1/MAX LCD housing for MKS PI-TS35 for board swap to MKS PI or MKS Skipr
Version of 2022 Updates: More strong; Small improvements; Back plate without screws; Can be placed on the right or left side of the printer; Version compatible with insert nuts(I used M3x3x4.2mm insert nuts); Version without Reset button;…
Mount for the MKS PI-TS35 display. The file lcd_case_front should be rotated 180°that the face is down on the build plate. Printed in ABS with standard Voron settings, 4 walls, 40% infill etc.
I made a simple mount for the MKS TS35 pi screen that uses the holes in the frame of the MK1 rook. 3mm self tapping screws hold the screen in place.
Since step file was never uploaded dis just some small modification using Prusa Slicer.
MKS PI board was designed by Makerbase to replace the Raspberry Pi to run Klipper firmware. Board allows for easy connection of an ADXL345 3-Axis Digital Gravity Sensor Acceleration Module. The case houses both the MKS PI and MKS TS35…
This is my design of MKS TS35 V2.0 screen mount for Flsun Q5 - version 2. This screen comes with Robin Nano v3 board, I bought the board and decided to make this mount. It uses the standard screen hole of Flsun Q5. No cutting or any…
A front mount for MKS TS35 screen for the Voron Trident machine. It was designed as drop in replacement of Mini 12864 holder and has only one single printed part. The MKS TS35 is larger than the Mini 12864 one, so the panel is 4mm taller…
Makerbase LCD TS35-R stand
Halterung MKS PI-TS35 fuer Voron Trident oder 2.4 gedruckt in ABS der Touch Screen ist 30 Grad geneigt passt an Stelle des eigentlich vorgesehenen Displays es werden 4 Schmelzgewindeeinsätze M3 und 4 M3 Schrauben benötigt
Mount for Voron Switchwire
With this mount you can install a Makerbase PI TS35 touchscreen on X-Plus. I am using it with a SKIPR motherboard. Use the original screws to attach the adapter to the printer, then you can use small self threading screws to secure the…
Compatible with all FLSUN that use originally TFT24
Housing - DLC32 V2.1 Board with TS35-R Touch-Display for Laser 3 Parts plus Feeds With a hole for RESET-Button And Mount for 40x40mm Fan Category: DIY
Mount using original screen holes for the MKS TS35 Screen. Support Required. Used M3x8 bolts and nuts to attach screen to holder and original bolts to attach mount to printer. Step file included for modifying
Reduction to PI TS35 display for ENDER 6/ CR10S
Bracket compatible with flat mesh skirt for Ender 3 NG . Dedicated for MKS Pi-TS35 display case. Bracket requires 4x M3 heat set inserts to connect with the skirt and 4x M3x8 screws to secure the display. Case requires 4x M3x8 screws. For…
Panel mit Schalter für einen Kosel Pro mit einem Makerbase MKS-TS35 Display. Der Schalter hat einen Durchmesser von 16. Die Lüftungslöcher dienen auch zum befestigen der Schrauben.
I needed a mount for a case by "SteFix" here https://makerworld.com/en/models/912392-makerbase-mks-ts35-r-case#profileId. The case is great BUT for positioning and not being in the way of the gantry movement of the cnc i needed to lift it…
I remixed the model using original Voron CAD models, since the skirts were at completely wrong scale to the whole 3D printer. Skirt STLs need to be flipped after importing into slicer. I also added Multibody variant of the faceplate if…
Combined two models to make a TS35 screen panel for the Ender 3. V1.0 - Added some support at the joint to support the weight. v2.0 - Cleaned up protruding spots and added a 40mm fan vent hole. There is some minor artificating inside the…
Adapts https://www.printables.com/model/282522-pi-tft50-mount to accept https://www.printables.com/model/273885-mks-pi-ts35-box
This is a remix of: https://www.printables.com/model/640821-btt-tft35-spi-displayadapter-for-sidewinder I made it, because the measurements didn't match the dimensions of the normal Artillery Genius "not the pro". Now it fits like a glove…
Parametric screen panel SCAD for Anycubic Predator, designed and rendered for MKS PI-TS35. Uses BOSL2 library, commit: f9e6e67acfbfd2a3c620c59e57d0d9023037bb35 .
for mounting use 4 M3*6 FHCS and 4 M3*6(up to 10mm would work) BHCS
Modified the part called BTT Mini12864 Case Adapter to now fit the MKS Pi case mount created by TownDrunk. https://www.printables.com/model/280841-case-for-mks-pi-ts35-touch-screen It is designed to be installed at the bottom of the…
MKS TS35 new display case Category: 3D Printer Parts
Panel to add a DC Barrel Connector for mks-pi-ts35-box without reprinting the enclosure. Print on the side, no support needed. Diameter of through hole is 8mm. I used the connector as one of the picture
Esse Painel para Display do MAKERBASE MKS TS35 / MKS TS35-R ela serve para esses dois tipos de tela, pra vc q gosta de fazer seus projetos ou mudou a tela da sua impressora acho q este painel pode te ajudar, deixando tanto os projetos…
Wall and ceiling mounts for the satellite speakers for the Philips HTS3565D/37 DVD Home Theater System. Currently in beta, the ceiling mounts haven't been tested yet and there is no center speaker mount yet. Ceiling mounts are designed to…
This is the modification to replace the stock TFT screen with the Touchscreen TS35 with Mks Pi mounted on the back. The design has a 3510 24v fan mounted on the side to cool both the Pi and the screen. It also has built-in cable…
I have printed this and saw the mistakes I made and changed them but didn't reprint to test. Category: 3D Printer Parts
Warning — I got a print issue with the tiny hooks which are attended to provide more grip, see picture. The stabilization structure was likely just too thin, and the stabilization structure became unstable during the print. Because it…
This is the TS351 FPV Video Transmitter Case by Stanleykuenzle, resized to proper dimension. His original design was exported too small and the case cover was upside down. These are the files scaled in Netfabb to the proper dimension and…
a holder for the TS351 transmitter on the dji to eliminate nicely Print Settings Printer Brand: RepRap Printer: prusa i3 Rafts: No Supports: Yes Resolution: 0.25 mm Infill: 10% Category: Hobby
Very simple bracket for the makerbase TS35 screen.
In the original model I wasn't too sure what screws to use but saw the potential for heatset inserts. The holes were enlarged to allow the use of M3 x 5 x4 (Voron standard) heatset inserts. Hardware required -4 x M3 x 5 x4 heatset inserts…
Carcasa soporte para pantalla MKS-TS35 para FLSun SR, con sujeción en horizontal, para usar con Flsun SR top cover frame raiser de abody
MKS DLC32 + TS35-R plotter enclosure See https://stephenc.github.io/post/2026-10-02-building-a-plotter-part-2/ A ventilated controller enclosure designed for fitting an MKS DLC32 V2.x controller and MKS TS35-R V2.0 touchscreen to a…
I used this model when replacing the stock mainboard in my Kobra 2 Plus with a Robin nano 3.1 mainboard. This just clears the build plate. Some may want it spaced further from the heated bed, but this is as far as it will go with the…
