1 / 4
Enclosure for MKS DLC32 V2.1 with TS24-R V2.0 — image 1
1 / 4

Enclosure for MKS DLC32 V2.1 with TS24-R V2.0

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Enclosure for MKS DLC32 V2.1 with TS24-R V2.0

Rating
5 / 5
Likes
33
Downloads
652
Makes
1
Views
3,922
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Here is an enclosure I designed for the MKS DLC32 V2.1 and the accompanying TS24-R v2.0 touchscreen. It has vents and opening for a 30mm fan for cooling the drivers. At the rear, power, USB, and TF card are accessible, as well as an opening for cabling. 

Printing:

Print the main enclosure in the default orientation. Print the lid with supports and rotated 15 degrees on the X axis so that the face lays flat on the build platform.

Fitment:

The lid friction-fits into the main enclosure, but the lip around the lid may need to be filed down a bit to fit, depending on your printer's calibration and slicer settings.

Assembly:

The DLC32 board is secured with two M3 screws opposite the rear ports, but fits pretty snug without them.

The screen is attached via four M3 screws with matching lock nuts.

The fan is attached with two coarse-threaded fan screws from the inside of the enclosure. Alternatively, you could use two M3x20 screws with matching lock nuts.

Note:

The holes for the reset and power switches were added after printing. I left the top edge blank for any customization someone may want.

 

Tags