P3Steel Toolson Y Clamp 60mm NEMA17
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've mounted a 60mm high torque NEMA17 motor on my P3Steel y axis. However the toolson designed lm8uu clamp hit the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I've mounted a 60mm high torque NEMA17 motor on my P3Steel y axis.
However the toolson designed lm8uu clamp hit the back of the motor, which is mounted on the right side as seen from the front.
On the y carriage I threaded the left side of the lm8uu clamp using an M4 tap.
Redesigned the clamp to take an countersunk M4x8 screw from the bottom side and thinned it so that it clears the stepper motor.
How I Designed This
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bURF533IoO6
Category: 3D Printing