Liczymy pasujące modele…
Bought a 10 x 11 openable cable chain that came with a triangular mount pattern. Made IGUS two-hole end pieces. One end swivels and the other is fixed Holes for M3 flat heads Original dimensions, but with slightly thicker walls I printed…
Schleppkette: https://www.igus.de/iPro/iPro_01_0003_0001_DEde.htm?c=DE&l=de Innenbreite Bi [mm]: 50mm Biegeradius R [mm]: 38mm An allen Enden müssen die passenden Anschlusselemente verwendet werden. Diese könnt ihr bei IGUS einfach mit…
Remix if Slimak's Cable Clamp Umbilical mod for CANbus needed the umbilical hole to be the size i needed for a CF113.018.D with a sleeve, works great for me instructions slide bowden tube through hole, then clip larger hole to umbilical…
Description There are a lot of different opinions about the use of Igus bearings in 3D printers. However, I have decided to use my Prusa MK3S/+ with the only logical combination of fixed and loose bearings and have had very good…
IGUS type Energy chain. Chain pieces, lid and both ends. Uploaded model dimensions: Inner diameter 18x13mm outer dimension 25x16,5mm. 40mm turning radius Choose your own dimension, just matter of scaling. For that I have uploaded the STEP…
What is this? Durable and long-lasting end caps for famous IGUS 16mm cable chain used in Voron Trident, Voron 2.4 and (some) Voron Switchwire builds. Fast to print. No print supports needed. Male and female models. Recommended print…
This is a IGUS Drylin linear rail upgrade for Prusa MK3S+/MK4 You will need those IGUS parts: 2x TS-04-12 330mm https://www.igus.eu/product/730?artNr=TS-04-12 3x TWE-04-12 https://www.igus.eu/product/931?artNr=TWE-04-12 Screw and Bolts…
I found a model with modifications to the original Prusa MK3 X-carriage and X-carriage-back to make Igus Drylin RJ4JP-01-08 bearings fit better, but couldn't find any version for the MK3S or MK3S+ carriages. I compared the .scad files…
This is an fastener for the Igus chain Series 05 inner width 16mm: https://www.igus.de/iPro/iPro_01_0002_0001_DEde.htm?ArtNr=05.16.038.0 I built it for my RatRig V Core 3 printer where I am using the above chain to carry the bed cables.…
Halterung für Igus, aber auch andere Lager mit den Maßen, die beim MK3S+ passen, sind ein Remix von einer Datei für den MK2 auf Thingie. Die originalen Schrauben können genutzt werden. Erst einbauen, ausrichten, dann leicht anziehen,…
2 hole mounts to be used with IGUS Chains
X Carriage mounts for the Anet A8 printer. Features Igus Drylin bushings POM lead screw nuts Adjustable tension on the Z axis guide rods Works with X-belt Tensioner https://www.thingiverse.com/thing:1683070 You will also require 4 x Igus…
IGUS E2I-10-10-018-0 chain ends with three screw holes (aka noname chain style) as fastening point, illustrated in sketch: The chain ends are connected in the same way in open and or fixed way to the the links. To the one side the chain…
I wanted to upgrade my LM8UU to IGUS Drylin. First attempt was to just swap LM8UU in the existing aluminium SC8UU by IGUS Drylin RJ4JP-01-08. Result was a lot of bearing clearance. According to datasheet, the IGUS drylin bearings need to…
The original LM10LUU is 55mm long and the IGUS bearings are 29mm long and wanted to add 2 bearings per side. So i had to modify the part to make the 2 IGUS bearing fit. !-important-! You should NOT add the robber pads on the inside. This…
Please note I posted a more generic linear bearing part that allows you to configure the linear bearing to be customized according to your needs: https://www.thingiverse.com/thing:2476782 . Also check out my parametric bearing housing…
I noticed that the orignial files arent available anymore, so I searched them in my old files and uploaded them. Sadly I cant upload the instructions, because Thinigverse cant upoald PDFs right now :( but i found them in German online:…
English: Tested and in action Igus Linear Rail Type TWE-04-12 = MGN9C Advantage of the Igus linear guides is that they run lubricant-free and quietly, the model TWE-04-12 is also adjustable and thus the bearing play can be reduced so that…
Remixed from the Zaribo design - using common DIN 912 M3*16 screws and nylon locking nuts instead of square nuts Print: PETG 0,20 Infill 10-20% no supports needed What you need: 6x M3*16 DIN912 screw (2 per bushing) 6x M3 nylon locking…
Note! The parts of the Z and Y axis are the new ones of the MK3S+ version. I decided to use them because they are improved and updated compared to the older ones. The parts of the X axis are those of the MK3S model. Hi there! I've been…
Adjusted the design to accept m3 screws and nuts + removed some material. This is a remix from this design: https://www.thingiverse.com/thing:4659115
This holder is designed for two Igus JSM-0810-10 bushings, allowing you to replace stock LM8UU bearings with these polymer bushings. You'll have to play around with the sizing to get the fit perfect. Support If you'd like to support me…
**Updated to v6***@ 2019-Dec-11* Note that the file with the parametric bearing is updated in time; please add this design to your favorite collection or like the design to come back later and get the latest version. Please PM me if you…
Remix of Petrzmax's bearing holder ( https://www.thingiverse.com/thing:2791727 ) to fit the Igus RJZM-01-08 8mm drylin polymer bearing, which has an overall diameter of 16mm. Inside notches keep the bearing securely in place. Additional…
This is a version of an IGUS linear bearing holder that has a standard 30 mm hole spacing to suit most Y axis frames. Note: This is to suit IGUS drylin linear bearings that have a 16mm OD ( as apposed to the standard LMU8 ball race linear…
This thing is the HyperCube stock X carriage modified to accept either the LM10UU linear bearings or the Igus RJ4JP-01-10 10mm bearings. These bearings both have a dimension of 19 mm x 29 mm. This modified carriage will accept one bearing…
Modified for Hiwin mgn12 and Igus RJUM-01-08
Basic block to add tension to igus bearing, prolonging viable lifespan, and reducing play. Work in progress, I haven't actually printed this yet. Too many projects, so little time. I'm printing up yet another emt8 out of petg and will get…
Heyho I already showed in the last video what can happen if you "forget" a candle in a 3D printed holder. I also presented a constructive solution on how to theoretically prevent this burning. However, as I found the project exciting…
NOT FOR STANDARD LMU8 linear bearings or plastic replacements !!! Modified original to suit M3 mounting bolts with counter sunk allen head Added some fillets to aid in fitting belts Reduced bearing bores to 15.9 mm to better grip the igus…
Simple tool to assist with quick and easy toolhead removal from magnetic IDEX printers. Designed for Igus Drylin RJ4JP-01-08 Learn more about magnetic IDEX here: https://www.printables.com/model/692818-magnetic-idex-t0-and-t1-v21-and-v22
Use this if you want to do a z-transpose of a Z-chain you got from an LDO Rev D Voron 2.4 kit, and want the chain to sit flush and level, without any bending of the chain.
so it is possible to use 8*16*25 bearings for Prusas MK4 x ends NEW 2023-06-20 Bushings for Igus RJUM-01-08 by Mr_angel | Download free STL model | Printables.com
Remixed the mounts by Crazybird because the mounting screws do not line up with the FT 2020 i3 Y axis bearing mounts. These make the Y axis completely silent. (well except for the motor) But no no jingleing of the bearings :) I also added…
bearing clip for http://www.thingiverse.com/thing:1533880 print 0.2mm 100% infill Category: 3D Printer Parts
Remix of the 8mm Self aligning Igus bearing by mska. Removed the rotating part to improve accuracy, took out the undercut around the bearing support which made it weak, moved the mounting holes so they can be mounted with bolts or self…
I've been using the Quick Fit X carriage by Yurykk for a few months now, and it works great, but it has a few issues in my particular setup. The belt clamp position were too close to the back of the motor by 5mm, there was not sufficient…
I had extra samples of igus 10-40 rail on hand and I figured I'd make a small parts tray. My original intent was for holding heatset inserts, but this will work with screws, nuts, anything small enough to fit. The sample boxes come with a…
This is a remix of https://www.thingiverse.com/thing:3090914 which adds nylon lock nut compatibility. See original for printing instructions Print Settings Printer: ReDuplicator Mk3x Resolution: .2 Infill: 40% Filament: eSun ABS Category:…
When building the Monster Kossel, I got Igus rod ends instead of the Traxxas variation. I couldn't re-use my Mini Kossel's effector, but I really liked the way the clamp worked to keep it all in place. Cue this effector. Spacing is…
Modification to the rear mounts to account for the Prusa Enclosure anti-slip damper which interfered with the installation of the rear pieces. This moves the mounting points and extends the top to avoid the anti-slip dampers.
This is a small remix of bed holder bracket to enable usage of Igus RFRM-2525TR10x2 There are two versions with only 0.4mm difference in hole diameter just to be safe. I tested "tight fit" one and works great. Post-Printing Components are…
first of all I got the Idea from a model by Schmelzerboy on Thingiverse: https://www.thingiverse.com/thing:4303972 BOM for my Predator 12 x Igus EBRM-04 J or EBRM-04 https://www.igus.de/product/187 12 x M4 lengh 25mm hexagon metric screws…
Remixed Banzaito's model to have holes for an igus cable chain as they are often included in Ender 3 to Switchwire kits.
This stop serves both as an optical termination of the linear line profile and as a mechanical barrier against the carriage running off the track.
Decided to try linear motion on my CR 10 Max a few months back and after looking into a few options, Igus Drylin got my attention. Being precise enough for 3d printing yet possessing a comparatively low cost. With the added bonus of no…
if you printed http://www.thingiverse.com/thing:1533880 or something similar and you switched the sides of 2+1 bearing so now your bearing is not hitting the stop switch and you hate to move the switch to other side .. here's a small…
EBB36 Can Board Mount IGUS Chainflex Mount w/ PG7 Threads. Pairs with: Umbilical Rear Passthrough Recommended to solder your molex terminals after crimping. They just need a tiny dab. Solder with the terminals facing up in the air so the…
Igus T10x2 leadscrew nut for bq witbox Category: 3D Printer Parts
This allows the usage of IGUS RJUM RJZM 01-08 bearings with the improved Frankenstein. The "offset" files do have more clearance for the bearing. Print Settings Printer Brand: Anet Printer: A6 Rafts: No Supports: Yes Resolution: 0.2…
Ok, the thing name is pretty long, but it actually describes what this thing is, so... ...here is my adapter to use TR8 1.5mm pitch leadscrews ( https://www.dold-mechatronik.de/TR-Spindeln-8x15 ) with the standard IGUS (…
A Remix of the Rostock Carriage Igus/Traxxas mod. I modified it for several reasons: fit my universal endstop-holder ( http://www.thingiverse.com/thing:471761 ) i dont like these "grid-style" belt mountings. they break of easily and…
A Kossel Mini carriage adapter suitable for linear bearings from IGUS, type TWE-04-12. The horns have been moved to center position and mountings for GT2 open loop belts have been added. The part is a remix from jcrocholl's original…
Igus Cable Carrier Mounting Bracket 4556T430 If this helped you out, tips are welcome on PayPal or Venmo If you decide to print or remix your own, I'd love to see a picture of how it turned out.
Decided to try linear motion on my CR 10 Max a few months back and after looking into a few options, Igus Drylin got my attention. Being precise enough for 3d printing yet possessing a comparatively low cost. With the added bonus of no…
Modified rear mount for IGUS chains. See the original model for the toolhead mount.
a key ring has been added on the back, and I'm just ashamed to take downloads from the author on makeworld. and he didn't post his model on this site.
This model is designed to ensure a tight fit of the IGUS Bushings. There are 3 versions: Made for RUTHEX M3 Inserts Made for Hexagonal Nuts (included in MK3/S Spare bag) Made for Square Nuts (included in MK3/S Spare bag) Required Parts:…
Igus Cable Carrier Mounting Bracket 4556T430 If this helped you out, tips are welcome on PayPal or Venmo If you decide to print or remix your own, I'd love to see a picture of how it turned out.
bearing holder for the IGUS RJZM-01-08 linear bearings ( which has 16mm OD) Has the same hole pattern as stock SCS8UU bearing blocks but can also use 3 bolt mounting if needed Update 2 10th March 2017>> added a custom version with 30mm…
I hate roller bearings so i swapped to igus 8mm on my prusa i3 mk2. (PS i notised an error in the STL file for the motor mount so i upploaded a new version 26.01.17) its important to get the pre loaded aluminium enosed bearings or it wont…
Prevents the energy chain from rearing up. So this always runs parallel to the lower part of the chain. The e version has a clip only on one side because there is no space for it behind the extruder.
As I replaced the hot bed holder with a much lighter version it also required to have 4 slider blocks instead of the 3 one. So I did a quick design for the Igus RJ4JP-01-08 sliders. The sliders can be pushed in easily and are snapped into…
See also my super long version of this! http://www.thingiverse.com/thing:2783436 I've updated this to make it compatible with my IGUS drylin bearings. I've added three more models with different hole sizes to fit, depending on how your…
A display stand for presenting the Igus drylin® linear guide sample pack
Hey guys, for this mod for "Full Bear MK3s" you will need the following things: 2x IGUS TS-04-12 (linear rail) with a length of 370mm 3x IGUS TWE-04-12 (linear rail carriage with adjustable play) (optional) 2020 aluminium extrusions with…
I needed an adjustable bearing block so i modified JoesTinman's design. This design is compatible with SC8UU bearing blocks. Printing: Print with 3 Perimeters & solid infill threshold: 15mm^2 There are two versions of this design, sc8uu…
Through a lot of ignorance on my part, I managed to order 3 chains for a Voron2 but only 2 mounting kits. Upshot of this - I now have as many as I can be bothered to print. Certainly not a perfect fit, but all the cut-outs and bulgey-bits…
1) Added grooves for zip ties instead of screw 2) Slighty modified inner diameter for tighter fit 3) 2mm thicker base
I made it for my Igus car on a DryLin WS10 rail fixed on a 20x20 extrusion. The clamp is for a GT2 belt with a 8 mm max width. You need to print it 2 times and assemble it. BOM : 2 x M3x30 bolts for the assembly 4 x M3x10 bolts for the…
This support is for the mechanical endstop board from reprapdiscount.com to be mounted on the Igus Drylin WS10 rail. So it is really specific to my needs. Instructions The small layer supports need to be removed (Dremel) to leave the room…
Was annoyed at my 3d Printed drag chain lifting up constantly, so I splurged on one from Igus. This can be used to attach an E04 series chain to any 4mm plate with 2 m3 screws. Must be printed from heat resistant plastic due to being so…
Cable chain ends with 2 mounting holes to allow mounting directly to an extrusion for example. Note that these do not have the strain reliefs that the genuine Igus ends have. All wires should be secured at both ends of a cable chain with…
Mistakes where made and i needed 3 parts to fix a Drag chain in a machine that i own. Sadly my supplier here where i live cant sell me less than 1 meters length. So inspired in the original part i made a 3 part drag chain design. Use…
End connection of the drag chain on a Multicam CNC broke, so I modeled it up and printed it. Seems to work fine out of PETG with 4 perimeters. Drag chain model; Igus E2 Medium Series 27, #27-07-100
Cross bar connection to go along with the Igus chain link. PETG or a high shore TPU should be used for some flex for the clicky connection (there's no stress on the part besides install) Drag chain model; Igus E2 Medium Series 27,…
Replacement link for an Igus drag chain, printed from PETG. Drag chain model; Igus E2 Medium Series 27, #27-07-100
This clip allows to add 2 10mm bearings (such as Igus RJUM-01-10) in place of the elongated one.
