Anet A8 X Carriage Mounts - for Igus Drylin bushes and POM lead screw nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X Carriage mounts for the Anet A8 printer. Features Igus Drylin bushings POM lead screw nuts Adjustable tension on the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 700
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
X Carriage mounts for the Anet A8 printer.
Features
Igus Drylin bushings
POM lead screw nuts
Adjustable tension on the Z axis guide rods
Works with X-belt Tensioner https://www.thingiverse.com/thing:1683070
You will also require
4 x Igus Drylin Bushes, (Igus RJ4JP-01-08 Plain Bearing 24mm x 15mm)
10 off: M3 x 10mm bolts
4 x M3 nuts
Re-use the nuts and bolts from your current lead screws
Notes
X Axis rod holes may need finishing with an 8mm drill bit
The screw holes for the limit switch are undersized so they can self tap
The caps which hold the busings in place are not intended to sit flush so you can eliminate any vertical movement.
The spacer sits between the bushings
Printing Notes
40% infill
4 or 5 permimiters
Remixes
Please feel free to remix this, I have included STEP and fusion 360 files
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
40
Filament: ERYONE PLA Black
Notes:
Tree supports, print upside down
Category: 3D Printer Parts