Liczymy pasujące modele…
Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…
Description There are a lot of different opinions about the use of Igus bearings in 3D printers. However, I have decided to use my Prusa MK3S/+ with the only logical combination of fixed and loose bearings and have had very good…
This is a IGUS Drylin linear rail upgrade for Prusa MK3S+/MK4 You will need those IGUS parts: 2x TS-04-12 330mm https://www.igus.eu/product/730?artNr=TS-04-12 3x TWE-04-12 https://www.igus.eu/product/931?artNr=TWE-04-12 Screw and Bolts…
I have igus drylin bearings with the matching rods on my MK3S+ and now that the MK3.9 upgrade is on the way, I'd like to keep them and use it on the new Z axis rods. Unfortunately the elongated version is not available from Igus, so…
I found a model with modifications to the original Prusa MK3 X-carriage and X-carriage-back to make Igus Drylin RJ4JP-01-08 bearings fit better, but couldn't find any version for the MK3S or MK3S+ carriages. I compared the .scad files…
Update 12/12/2023 I have added a new version that has 2 retention screws. The new model is named with v2 at the end The best solution for the use of Drylin bushings on your Y Axis and to replace the terrible mounts on your SV06.…
Update 12/16/23 I have made a step file for you guys who need / want to remix this. If you need a specific change. I can probably do it too, fairly quickly, just message me and let me know. Original Post I modeled this based on Sovol's…
X Carriage mounts for the Anet A8 printer. Features Igus Drylin bushings POM lead screw nuts Adjustable tension on the Z axis guide rods Works with X-belt Tensioner https://www.thingiverse.com/thing:1683070 You will also require 4 x Igus…
This bearing block is meant to clamp onto drylin 8mm polymer bearings. The housing uses 4 lobes to apply even pressure on the plastic bearing. The clamp is secured with an M3x18mm screw and nut. M4 screws are used for mounting and the…
I wanted to upgrade my LM8UU to IGUS Drylin. First attempt was to just swap LM8UU in the existing aluminium SC8UU by IGUS Drylin RJ4JP-01-08. Result was a lot of bearing clearance. According to datasheet, the IGUS drylin bearings need to…
Remixed from the Zaribo design - using common DIN 912 M3*16 screws and nylon locking nuts instead of square nuts Print: PETG 0,20 Infill 10-20% no supports needed What you need: 6x M3*16 DIN912 screw (2 per bushing) 6x M3 nylon locking…
Cuscinetti lineari Drylin serie RJZM-01- misure 5-6-8, e serie RJUM-01- misure 10-12-16-20-25-30-40-50. Creati con solidworks con passaggio semplificato*. per le misure complete consultare il file in allegato Drylin_datasheet.pdf. Sono…
Remix of Petrzmax's bearing holder ( https://www.thingiverse.com/thing:2791727 ) to fit the Igus RJZM-01-08 8mm drylin polymer bearing, which has an overall diameter of 16mm. Inside notches keep the bearing securely in place. Additional…
Hi everyone! This is a remix! However the original no longer exists and printables won't let me post it as a remix without a link to the original design. I am for now posting it as “an original design”. But I will provide as much…
This spacer will move your Y Belt mount 4mm lower to put it back in line with the motor and tensioner.
Simple tool to assist with quick and easy toolhead removal from magnetic IDEX printers. Designed for Igus Drylin RJ4JP-01-08 Learn more about magnetic IDEX here: https://www.printables.com/model/692818-magnetic-idex-t0-and-t1-v21-and-v22
A display stand for presenting the Igus drylin® linear guide sample pack
Decided to try linear motion on my CR 10 Max a few months back and after looking into a few options, Drylin from IGUS got my attention. Being precise enough for 3d printing yet possessing a comparatively low cost. With the added bonus of…
Modification to the rear mounts to account for the Prusa Enclosure anti-slip damper which interfered with the installation of the rear pieces. This moves the mounting points and extends the top to avoid the anti-slip dampers.
Decided to try linear motion on my CR 10 Max a few months back and after looking into a few options, Igus Drylin got my attention. Being precise enough for 3d printing yet possessing a comparatively low cost. With the added bonus of no…
A Kossel Mini carriage adapter suitable for linear bearings from IGUS, type TWE-04-12. The horns have been moved to center position and mountings for GT2 open loop belts have been added. The part is a remix from jcrocholl's original…
Decided to try linear motion on my CR 10 Max a few months back and after looking into a few options, Igus Drylin got my attention. Being precise enough for 3d printing yet possessing a comparatively low cost. With the added bonus of no…
1) Added grooves for zip ties instead of screw 2) Slighty modified inner diameter for tighter fit 3) 2mm thicker base
Drylin bearing guide bushing adapter 10mm to 8mm If u have a rod that is 8mm but u your model has a 10mm drylin socket
SV06+ X Carriage Extruder Block for Drylin bearings remixed off of the original sovol files for their injection molded parts Added V2 which closes up the backside on the belt slit, which gives it a lot less possibility to warp…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jh8Xc4ZOjja Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/3hakIBc3CoG Category: 3D Printing
