1 / 9
MK4 x-end-clip for LM10UU or drylin RJUM-01-10 — zdjęcie 1
1 / 9

MK4 x-end-clip for LM10UU or drylin RJUM-01-10

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple mod of the X End Clip for the MK4 to accommodate 2 LM10UU or 2 drylin RJUM-01-10 bearings instead of one LM10LUU

Ocena
5 / 5
Polubienia
6
Pobrania
189
Wydruki
0
Wyświetlenia
934
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

I have igus drylin bearings with the matching rods on my MK3S+ and now that the MK3.9 upgrade is on the way, I'd like to keep them and use it on the new Z axis rods. Unfortunately the elongated version is not available from Igus, so either one or two normal ones can be used. I opted 2, but the 2 normal ones are 3 mm longer than the elongated one (otherwise drop in replacement). This meant I need a new clip to hold them in place, thus this mod.

There are two versions, one is similar to the original one and one with a 3mm tall lip on the bottom.

Print the normal one as you would print the original part, print the lipped one with the lip on the print bed. No supports are needed.

You need only one version, I added the lipped one just for the looks.

 

Refinements may come as I get the new parts and assemble the printer. Check back time-to-time if you are interested in changes. The changelog will be added as the model is updated.

 

Changelog

2023-10-19Lipped model updated, the lip made smaller and to fit on both sides without overhangs.

Tagi