Kossel Mini carriage for IGUS DryLin TWE-04-12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Kossel Mini carriage adapter suitable for linear bearings from IGUS, type TWE-04-12.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A Kossel Mini carriage adapter suitable for linear bearings from IGUS, type TWE-04-12. The horns have been moved to center position and mountings for GT2 open loop belts have been added. The part is a remix from jcrocholl's original Kossel Mini carriage in OpenScad.
I have used IGUS DryLin® carriages due to their low noise and lubricant/maintenance free glide pads. Also they are easier to acquire here in Germany than the ones proposed in the original BOM.
What you need
Please note: All links to Amazon (amzn.to), AliExpress (s.click.aliexpress.com) or marked with * are affiliate links, through which I receive a small commission. Perhaps you would like to support my work by making a purchase.
Parts used (BOM)
2x M3 allen head screws, length depending on your rods
IGUS DryLin linear rails
https://www.igus.de/product/drylin_TW_04
Tools used
Screwdriver or allen-key suitable for your M3-screws
https://amzn.to/45a8DPQ
Suggested print settings
Rafts: No
Supports: No
Resolution: 0.2mm layer thickness
Infill: 30% or higher
Instructions
Slice model and print three carriage adapters.
Use M3 allen head screws to mount adapters on carriages.
Insert one end of the corresponding GT2 open loop belt into the outer notch with about 2cm of extra length.
Bend over the exceeding belt and insert it into the inner notch.
Continue with the other end of the belt accordingly.
Use M3 allen head screws to mount spherical bearings.
Enjoy a smooth ride 😉