Wyniki wyszukiwania: twe

Sortowanie

2342 modeli

P
PrintablesM4NU

Precision Tweezers v2 - 3D Folding

A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…

Pobrania
41 775
Polubienia
12 178
Ocena
4,67
P
PrintablesQED_Maestro

Multimeter (DMM) probe tweezer

Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.

Pobrania
20 776
Polubienia
5657
Ocena
4,85
P
PrintablesM4NU

Precision Tweezers v3 - 3D Folding

A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. In this version I added an internal structure to greatly improve the accuracy and I created a full set of tweezers. There are 7 models :…

Pobrania
7984
Polubienia
2274
Ocena
4,92
P
PrintablesCrazy_engineer!

Multimeter probe tweezer

This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…

Pobrania
4259
Polubienia
940
Ocena
4,73
P
Printables3DVJ Models

ChooChoo - A Lightweight/Support Free 4 Tone Train Whistle v3.1

Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…

Pobrania
2933
Polubienia
838
Ocena
4,96
P
PrintablesM4NU

Precision Tweezers (Electronics & Clockwork)

A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested

Pobrania
2881
Polubienia
530
Ocena
4,79
P
PrintablesMateusz Tokarz

One-Hand Multimeter Probe Tweezer Adapter

BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…

Pobrania
2776
Polubienia
973
Ocena
4,9
P
PrintablesSupanut Tho

Minimal Stand - Tablet, Laptop, Books and Anything In-between.

It's a minimalist stand, with a customizable width. Perfect for anything. Need More Slots?: Prints this Divider separately. Have all the slots you want! Adjust The Width: You can stretch the base model in z-direction in the slicer for a…

Pobrania
2545
Polubienia
1534
Ocena
4,86
P
PrintablesWesty

Lightweight Poster Paper Backdrop

This two part lightweight and simple model is ideal for 22" x 28" (550x700mm) Poster Paper you can find at your local hobby store although any size will work OR standard printer paper ! Whether you are shooting 3D model pictures on your…

Pobrania
2543
Polubienia
556
Ocena
4,84
P
PrintablesHoracio

HSW Tweezer Holder

Tweezer Holder for the HSW Tweezer container, easy to print with 2 models to choose. Can be printed without support. Easy to Snap to your Honeycomb Storage Wall. Tweezer Dimension This holder is designed based on the regular tweezer with…

Pobrania
2308
Polubienia
429
Ocena
5
P
PrintablesKajry

HSW Six ESD tweezers holder

Holder for six tweezers like this: https://www.aliexpress.com/item/1005002899777953.html?spm=a2g0o.productlist.0.0.e8d24

Pobrania
2303
Polubienia
417
Ocena
4,98
P
PrintablesAaronOaks

Ikea Skadis Tweezer Rack

Tweezer rack for Ikea Skadis pegboard system. Multiple slot sizes are included to accommodate different size tweezers. Should be printed with supports for the Skadis hook regions. Remix: I enlarged the original model to fit the larger…

Pobrania
2072
Polubienia
417
Ocena
4,77
P
PrintablesTy10y

Improved Soldering Tweezers

Hello 3D Printing Enthusiasts! This Thing is my version of Soldering Tweezers! Simply print the long base, 4 handles, assemble, and you get a super versatile wire holder for your soldering station! The original tweezers design was remixed…

Pobrania
2027
Polubienia
490
Ocena
4,79
P
PrintablesS_T_A_R_K_E

Skadis tweezer holder

Tweezer holder for the Ikea skadis pegboard system. Original OnShape file available here https://cad.onshape.com/documents/a23dd4002928da9978ebafd8/w/d15acd308e77d01db89f5ccf/e/2e32cb14af912c3bb6e348b6 Print Settings Supports: Yes…

Pobrania
1730
Polubienia
289
Ocena
4,98
P
PrintablesHedo3D

cross tweezers Pinzette - easy print

this is a remix: https://www.thingiverse.com/thing:2384216 The great design of pzonyga didn't really grab the tip for me because the thin arms deformed a little when they went together. So I made the tweezers a little more massive and…

Pobrania
1574
Polubienia
202
Ocena
4,93
P
PrintablesFabianVeile

Thin Grippers / Tweezers (Compliant Mechanism)

Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…

Pobrania
1570
Polubienia
422
Ocena
4,69
P
Printablessh

🤏 Grip precision tweezers (3D folding)

Info: I liked the original a lot (thanks @M4NU !) added grip lines at both ends of the tweezers, so it can hold things safely i have found it useful for my usage Asembly: just fold it, no glue needed (just like original) Print settings:…

Pobrania
1512
Polubienia
190
Ocena
4,95
P
PrintablesAMPDesignworks

Tweaked Headphone Holder Desk Clamp

I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…

Pobrania
1412
Polubienia
169
Ocena
4,89
P
Printableswootje13

Lightweight drip tray for the Pokémon Bulbasaur Planter

Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…

Pobrania
1097
Polubienia
253
Ocena
5
P
PrintablesEFY

STRONG Tweezers Best Ergonomy / Forceps v2

I designed this powerful tweezer for laboratory equipment whose purpose is to directly facilitate laboratory activities related to clinical, biological or chemical laboratories. Since I could not get functional efficiency from the designs…

Pobrania
709
Polubienia
185
Ocena
4,25
P
Printablestedejohann

Shopping Cart Coin Key - OLV (Overengineered Lightweight Version)

With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…

Pobrania
598
Polubienia
155
Ocena
5
P
PrintablesTony Borisov™

Extra Long Aquarium Tweezers 50 cm

Use the 3mf file. I use a 0.6 nozzle, make sure you adjust that to your own nozzle. The end of the tweezers has a cup that will allow you to grab different things and hold them more easily. 4 outer walls, 5 bottom, and top layers Infill…

Pobrania
543
Polubienia
72
Ocena
4,5
P
PrintablesPeter Farell

Roaring Twenties Hair Pin

Roaring Twenties / Flapper / Deco - Hair Pin. \ Gcode has 4 color changes. No need for multilateral.. just change at z height built into g code.

Pobrania
532
Polubienia
128
Ocena
4,5
P
PrintablesJimmyT

Tweezer cover

tweezer cover - the originals were soft and poorly visible (transparent in the photo)

Pobrania
509
Polubienia
88
Ocena
5
P
PrintablesTN 3D-Objekte

Tweezers

Every one of these tweezers need less then 5meters. Have fun!

Pobrania
473
Polubienia
41
Ocena
4,88
P
PrintablesLennnard

#Gridfinity Tweezer Rack

For just one or two tweezers

Pobrania
395
Polubienia
48
Ocena
4,86
P
PrintablesMatt Boyer

Magnet Tweezers

Tweezers to grab small magnets. Holds 8-15mm magnets. There is also a separate model included (by request) for 6-10mm magnets. EDIT 2022-05-26 Added tweezers for 4mm magnets by request Print instructions PLA, no supports.

Pobrania
381
Polubienia
96
Ocena
4,9
P
PrintablesFierce Pears

Tweezers

Small tweezers for removing poops during print.

Pobrania
367
Polubienia
23
Ocena
5
P
Printablessmdollins

HSW Tweezer, Files, & Scissors holder

3 tool holders in one. Hold 3x Tweezers, 5x files, and a pair of scissors on your Honeycomb Storage Wall.

Pobrania
351
Polubienia
88
Ocena
5
P
PrintablesPGold

Adapter Reducer between 1" to 1/2" NPT threaded pipes

Printed using ePLA. use support as already planned in the attached bgcode file or use your own.

Pobrania
310
Polubienia
41
Ocena
0
P
PrintablesOtty_Skipper

IKEA Skadis tweezers holder

A simple holder for tweezers that only requires 2 slots in a row.

Pobrania
297
Polubienia
33
Ocena
5
P
PrintablesRo3Deee

Omega Tweezers for multimeter probes

Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.

Pobrania
237
Polubienia
78
Ocena
5
P
PrintablesAinon3Dtisk

Asian chopsticks, cutlery, tweezers

Hello, Today I have Chopsticks for you. Can't you eat with classic chopsticks? Are you tired of it? Here is the solution! They are really great and work well, I ate a lot. :-) Happy printing! I used PLA/PETG as the material. You need to…

Pobrania
216
Polubienia
43
Ocena
0
P
Printablesgskollnau

Hook for small, lightweigth picture frames

Tiny hook (2cm square) for small, lightweigth picture frames, use double sided tape to stick it on the wall.

Pobrania
215
Polubienia
23
Ocena
5
P
PrintablesMetikumi

Technical Lightweight Hook for Clothes or Bags

This is my design of an intentional technical-looking hook to hang clothes or bags to a clothes rail. I designed it for a minimal material use and with a good compromise of stability. Update 2022-09-27: Added D18 for Ikea furniture. Added…

Pobrania
202
Polubienia
33
Ocena
0
P
Printables3D KIMBA

Precision Multimeter Tweezer – SMD & Small Component Testing Tool

Precision Multimeter Tweezer for SMD and small components Introduction Traditional multimeter probes can sometimes be inconvenient when measuring small components or testing printed circuit boards. To address this, I designed a pair of…

Pobrania
183
Polubienia
73
Ocena
5
P
PrintablesPGold

Reducer between 1" male to 1/2" female threaded pipes

Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.

Pobrania
168
Polubienia
23
Ocena
5
P
PrintablesFierce Pears

Tweezers v2

Slim long tweezers for removing poops during print.

Pobrania
151
Polubienia
10
Ocena
4,6
P
PrintablesSqwince
Pobrania
139
Polubienia
14
Ocena
5
P
PrintablesSupanut Tho

Minimal Stand's Divider [Add-On] - Tablet, Laptop, Books and Anything In-between.

Add more slots to your Minimal Stand with this divider. The Divider is 5mm thick, please adjust the peg's length accordingly. Prints Settings: Supports: Tested with no support. Layer height: Tested with 0.2mm. Infill Pattern: 3D…

Pobrania
137
Polubienia
17
Ocena
5
P
PrintablesAliceChenArt

Strong Grip Pointed Tweezer

Made myself a tweezer that is compact, strong and precise. Printed in PLA, 25% infill, 4 perimeters. FreeCAD modeling.

Pobrania
122
Polubienia
20
Ocena
5
P
PrintablesTheWortLord

Compact Tweezer Case

I ordered a set of tweezers from Amazon and they're great. They came in a leather (pleather?) pouch which was nice but for me it took up a little to much room so I made this compact holder. Link to tweezers. Printed both halves at once…

Pobrania
104
Polubienia
18
Ocena
5
P
PrintablesDH

mm710 Remixed @8042s Lightweight Gaming Mouse (30g) with all buttons

Side buttons and dpi button is usable with this model. Works for me. Must thank original model author for providing good base model.

Pobrania
99
Polubienia
7
Ocena
0
P
PrintablesTomek

Lightweight Spool for samples and sharing

About the spool: lightweight modular filament spool ( <50g ) The spool is as strong and lightweight as you want (just change infill or perimeters) vase mode core (various heights), can handle up to 250g of filament, with tag to indicate…

Pobrania
95
Polubienia
52
Ocena
5
P
Printablestbk

Outwell Camping Stool/Chair Feet

We lost the foot on our camping chair. That would't be so bad if not always dirt come into the aluminumprofile, that then lands in the Camper. In addition, the aluminum cuts our camping carpet. So I decided to draw a foot for the chair.…

Pobrania
92
Polubienia
16
Ocena
5
P
PrintablesShawneeeya

Tweezer straight pointed tip

As the title says, this is a replacement tip for my ifixit tweezer with ceramic tip. Might need to adjust the diameter according to your screw.

Pobrania
90
Polubienia
16
Ocena
5
P
PrintablesStarcom

FNIRSI Spotwelder stand/holder

I made this Stand for FNIRSI Spotwelder, I reduced the viewing angle from 135° to 120°, this angle is more pleasant to look at. The stand provides much more stability for the spotwelder and when you are done you can place the electrodes…

Pobrania
87
Polubienia
20
Ocena
0
P

Atomkraftwerk V2

Man kann das Atomkraftwerk ohne stützen drucken aber dann gibt es Stringing und der Druck schaut dann nicht mehr so gut aus. Wenn man sich die Datein einzeln ausdruckt mit unterschiedlichen farben schaut das modell schöner aus und hat…

Pobrania
79
Polubienia
2
Ocena
0
P
PrintablesInqEnzo

Tweeter Speaker box

Needed 2 speaker boxes for a piano upgrade. They hold a 1.57" speaker. They require 2 pieces of .03" thick .08 round hole perforated stainless steel sheet 1.815" x 2.75" for the grills. Mounting screws at #8-32 2" long+ I used 2-½ long…

Pobrania
68
Polubienia
5
Ocena
0
P

Finger Pliers/Tweezers

These finger-pliers can pick up small parts. It is a single print and does not need support. The 3mm connecting pin broke off while removing the print. Maybe too fragile anyway. So I drilled out the pin location and installed a 3mm x 8 mm…

Pobrania
67
Polubienia
30
Ocena
0

REFRIGERATOR HANDLE. DISTANCE BETWEEN HOLES 238MM РУЧКА ДЛЯ ХОЛОДИЛЬНИКА "БИРЮСА"

РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ

Pobrania
63
Polubienia
13
Ocena
0
P
PrintablesDanAndersen

V.PoP's Ikea Skasid Tweezers holder with aligned parameters

Remix of 4x Tweezers holder to mount on a IKEA Skådis Pegboard, remixed with better parameters to make it fit easy.

Pobrania
61
Polubienia
9
Ocena
0
P
PrintablesI D

Lightweight front sight for Reximex RP (MITO)

Simple, fast to print Lightweight front sight for Reximex RP (MITO). (original shroud removed to save weight). Customizable height with changeable inserts. Meant to be fastened by small headless screw M3 x 4. (probably any long enough M3…

Pobrania
57
Polubienia
2
Ocena
0
P
PrintablesMohan Das

Stand for 8x Plastic Tweezers

Modified an existing model to use less material and accommodate 8 plastic tweezers.

Pobrania
46
Polubienia
5
Ocena
0

Soap dish to go between bar and wall in shower

Went to visit my brother's apartment and both the bathrooms in his apartment have showers with no level surfaces and no good place to set a bar of soap with it sliding off as soon as water is turned on. This is a solution I came up with…

Pobrania
45
Polubienia
2
Ocena
0
P
PrintablesSteveW91
Pobrania
44
Polubienia
0
Ocena
0
P
PrintablesAtjo-Print

Decorative necklace twenty-sided

Twenty-sided decorative necklace. Dimensions 30mm 17mm 17mm. Hole dimensions 3mm.

Pobrania
42
Polubienia
6
Ocena
5
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
41
Polubienia
14
Ocena
0
P
PrintablesSkeletalPrints

SideBox with slots for glue stick +tweezers

SideBox Remix Shorter and slots for glue stick and tweezers

Pobrania
34
Polubienia
5
Ocena
4,67
P
PrintablesMichael

Ford Focus MK4 | front footwell brackets for Aliexpress ambient light

Ford Focus MK4 brackets to stick the Aliexpress ambient footwell LED's on. The brackets will fit into the original mounting positions where normally the factory ambient lights will be installed. Somehow left and right have a slightly…

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesRegan Batchelor

Nemo - Plastic Antweight

Say hello to Nemo! Nemo is a one-pound plastic robot based on the battlebot Malice, but he's about as beginner-friendly as a spinner can get! He only requires three printed parts, and there is plenty of space inside to fit whatever…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesSvabd

Joint for Outwell cabinet

A couple of years ago I broke part of a joint to an Outwell camping locker. I temporarily repaired it and now, thanks to a Prusa MK3S+ 3D printer and Fusion 360°, I've designed and printed a new one. I haven't installed it yet, it may be…

Pobrania
25
Polubienia
1
Ocena
0
P
Printablesluisriverag

Tweezers holder for Lidl/Parkside pegboard

Simple holder for tweezers to put on pegboard

Pobrania
20
Polubienia
4
Ocena
0
P
PrintablesDP design

Mix&Match basketweave containers

Thanks to ❤ and download! These basketweave containers replicate octagonal plait basket weave. The total diameter of the three containers together is about 150mm/6 inches. The heights are 80mm, 100mm, and 120mm (3.25, 4, 4.75 inches), but…

Pobrania
17
Polubienia
7
Ocena
0
P
PrintablesJulianmaux

2_rueda_coche_hotweels

Repuesto para una rueda de coche de juguete que no gira (va pegada).

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesStillpointx

Locking shims for Lightweight Poster Paper Backdrop

The original backdrop file is great, https://www.printables.com/model/440256-lightweight-poster-paper-backdrop but the connection between the backdrop arms and the paper is loose and can fall apart if handled incorrectly. To solve this, I…

Pobrania
11
Polubienia
2
Ocena
0
P
Printablesflo4xx

Gridfinity Knipex Tweezers

4x0.5 Gridfinity Box to hold Knipex Tweezers. Can be printed in two colors (sepearate one for top surface) as shown in the .3mf file.

Pobrania
10
Polubienia
2
Ocena
0
P
Printables3DHippo

Cablemount for between two tables

All you need for this are: 2x Cablemount 1x Elongated saucer for flower boxes(Like this one) After printing, clamp the holders between the two tables, and then you can put the saucer between them as in the photos. The saucer is stable…

Pobrania
10
Polubienia
5
Ocena
0
P
Printablesshaakunthala

Lightweight bike acessory handlebar mount ⌀ 22 mm PETG

I bought a stylus to enter directions on my phone while biking with gloves on. This is mostly useful in the winter. I didn’t like the original double-sided tape mount, so I designed a simple 3D-printed handlebar mount instead. It snaps…

Pobrania
7
Polubienia
0
Ocena
0
P
Printablesjorych

Battery tweezers

I had trouble getting the AA/AAA batteries out of the box, so I made these tweezers.

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesOttri

Privatweg

Verbots Schild, Privatweg Durchfahrt und Park verbot.

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesHeart Labs

BORING Tweezer - Set

BORING Tweezer - Set Not as boring as it seems. These are highly optimized for FDM printing, super cost-effective and print perfectly every time. Ideal for teachers, scientists and hobbyists who might deal with many students or multiple…

Polubienia
23
Ocena
0
P
PrintablesPeter Farell

cantwell class arrestor cruiser

cantwell class arrestor cruiser Starwars : Andor. Split. Glue together. or use .obj and resize to your needs. I would nod reduce more than 20%.

Polubienia
7
Ocena
0
P
PrintablesRyan

Simple Lightweight Glider (20g)

Features: 10 by 10 inches (scale down in slicer for smaller sizes) Flies 35 to 50 feet 20 grams of PLA One part No supports needed! Usage: Pinch behind wings Adjustable flaps for optimal preformance Bend front wing flaps down and back…

Pobrania
14 102
Polubienia
1558
Ocena
4,07
P
PrintablesSand

Ender 3 V3 SE Lightweight Fan Shroud

Use stock 4010 fan and bolts. Both the fan shroud and the air duct can be printed in PLA. Two versions available, with honeycomb or horizontal grill intake. Print settings: Nozzle diameter: 0.4 mm Layer height: 0.1-0.2 mm Infill density:…

Pobrania
10 407
Polubienia
907
Ocena
4,83
P
PrintablesSevro

Tweeting Bird

Instruction Pour water into model and make bird music :) Water level should be like on a picture or a little more. If bird only whistle try tilt it forward. You have to find spot where water is bubbling by you blow. Different tone of…

Pobrania
8678
Polubienia
1337
Ocena
4,89
P
PrintablesAndras Farkas

18650 Cell Holders for DIY Battery Packs – Lightweight, Durable, and Easy to Print

Summary: The 18650 cell holder is a 3D-printable component designed for securely holding 18650 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…

Pobrania
5161
Polubienia
2242
Ocena
4,83
P
Printablesdjedje_zr7

(x6) Tweezers

Garage Set part 4 : Tweezers for 3d printers I don't have a 3D printer so if I could win a Prusa i3 MK3S at the "pratical contest" it would be fantastic. Please vote for me !!! Dje See also in pratical contest: Bathroom Set :…

Pobrania
5060
Polubienia
704
Ocena
4,7
P

Gridfinity Dual-Height Tweezers & Feeler Gauge Holder

This Gridfinity compatible holder has four spaces in a 1x1 holder. The front two are 8 units high and the back two are 12 units high - perfect for a few pairs of tweezers and a feeler gauge - these tools are always right beside my…

Pobrania
4860
Polubienia
456
Ocena
4,95
P
PrintablesPrint@Hive

multimeter tweezers

A practical probe holder designed to keep multimeter test leads firmly in place while working on electronics, microcontrollers, PCBs, and electrical circuits. It acts as an extra hand, allowing users to perform measurements more…

Pobrania
4550
Polubienia
1388
Ocena
4,29
P
PrintablesPhilipp

Mini-Me v4 lightweight Ender3 Hotend Duct (Stock Parts, 5015, No Soldering, Fully reversible)

This part was originally on thingiverse. I will move it here as the site had problems with stability and spam. Feel free to browse the comments and makes here . This is a custom hotend duct, which uses the stock fans and improves part…

Pobrania
4395
Polubienia
476
Ocena
4,95
P
PrintablesRecko

Poop Chute Basket - A1/A1 Mini - Lightweight

This is a lightweight, strong basket that prints in just over 1 hour. The design helps with catching purged material when it drops off the wrong end of the wiper.

Pobrania
4134
Polubienia
360
Ocena
4,76
P
Printableschiz

JST Tweezers

UPDATE : A new and improved angled version is now available for download! https://www.printables.com/model/475497-angled-jst-tweezers _____________ I've been using this JST tweezers whenever I'm modding 3d printers. If you're like me, I…

Pobrania
4019
Polubienia
1102
Ocena
4,94
P
PrintablesEcholalia

Tweaked Cat Key Hook (stronger, easier to print)

I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…

Pobrania
3899
Polubienia
751
Ocena
4,85
P
Printablesreddadsteve

Tweety

Tweety, also known as Tweety Pie and Tweety Bird, is a yellow canary in the Warner Bros. Looney Tunes and Merrie Melodies series of animated cartoons. The name "Tweety" is a play on words, as it originally meant "sweetie", along with…

Pobrania
3381
Polubienia
807
Ocena
4,88
P
Printableschiz

Angled JST Tweezers

REVISION HISTORY 2023-07-23: v1.01 released - resolved issues with overhangs in the “teeth” 2023-05-08: v1.00 released PROBLEM I found out that though my JST tweezers, being very effective for pulling out and connecting back JST…

Pobrania
2820
Polubienia
510
Ocena
4,93
P
PrintablesFozi

Cranked / Angled Precision Tweezers - 3D Folding

I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…

Pobrania
2634
Polubienia
340
Ocena
4,63
P
PrintablesFirstlayer Oy

Pull-Handle Set: Modern, Lightweight, and Sturdy

Modern, Lightweight, and Sturdy Pull-Handle Set Introducing our versatile pull-handle set, perfect for anyone seeking a durable and stylish solution for their home, office, or project. Designed with a modern industrial look, these handles…

Pobrania
2540
Polubienia
826
Ocena
5
P
Printables_cybermouse_

Gridfinity Pick + Tweezer Racks by Zack Freedman

Pointy boi storage for the Gridfinity modular workshop storage system - saves space and delicate fingies! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…

Pobrania
2277
Polubienia
429
Ocena
4,82
P
Printablesuetam3

Set of Lightweight, Intricate Christmas Ornaments

Introducing a set of six intricate (ornate), flat Christmas ornaments, perfect for quickly and beautifully decorating your Christmas tree! These lightweight, delicate decorations are designed for maximum 3D printing efficiency.

Pobrania
2233
Polubienia
469
Ocena
5
P
PrintablesEasyFix

Lightweight AMS Adapter Wheels for Polymaker Cardboard Spools

Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…

Pobrania
2213
Polubienia
355
Ocena
4,57
P
PrintablesKyleTW

MK4 Bi-Directional Fan Duct - Lightweight and Effective

*NOTICE* If your duct is not centered to the nozzle, please print the offset version of the duct that offsets the ducts 2mm to the right to try and correct for this. There does not seem to be a reliable pattern for what machines need the…

Pobrania
2180
Polubienia
561
Ocena
4,9
P
PrintablesDotCom Artwork
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
2072
Polubienia
995
Ocena
4,93

Craft Tweezers | Great for crafting w/ pony beads

These craft tweezers come in handy for grabbing small items with precision. Available in two tension options -- v4 for soft tension and v5 for firm tension -- these tweezers are especially useful for crafting with my pony beads and for…

Pobrania
2016
Polubienia
529
Ocena
4,92
P
PrintablesICT Avatar

Tools modular desktop stand (Tweezer;Plier;Screwdriver) V 2.0

Modular stand V 2.0 The possibility of adding modules as desired. V 1.0 https://www.thingiverse.com/thing:2495885 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1…

Pobrania
2016
Polubienia
412
Ocena
4,88
P
PrintablesMichael K

Force Knight - 1lb Plastic Antweight Combat Robot

This is an open-source Plastic Antweight combat robot, intended for the SCAR component kits available from Turnabot and Team Malice. This and other community designs can also be found on the Team Malice website . It placed 4th overall at…

Pobrania
2003
Polubienia
149
Ocena
5
P
PrintablesSartor

Lightweight 21700 6S2P, 6S3P battery holder

Print without support. In Prusa slicer it is better to use Classic perimeter generator (instead of Arachne) and disable “Detect thin walls” setting. For fast printing increase number of perimeters to 4 (for 0.4 nozzle) and disable “fill…

Pobrania
1872
Polubienia
94
Ocena
5
P
PrintablesJared

The Better Pistachio Opener and Extractor Tweezers - Updated v1.1

Remixed from the original pistachio opener on Thingiverse. I really loved using them, but wasn't sure what to do with my hands after cracking the shell open and trying to get the nut out with my fingers. Now the tweezers immediately grab…

Pobrania
1700
Polubienia
230
Ocena
4,79
P
PrintablesTrueShocker

HSW 9 tweezers holder

A remix of the 6 tweezers version if you have 9 tweezers to store

Pobrania
1688
Polubienia
386
Ocena
4,96
P
Printableshmoldenhauer

Gridfinity drill bit trays / long tool holder / tweezers holder (height 2.5)

The original design is taken from Miguel Camba , who was inspired by Alexandre Chappel's drill bit tray . I reworked the Fusion360 file to have a better adjustability. It is not perfect yet, but spacing, widths and lengths are now fully…

Pobrania
1670
Polubienia
283
Ocena
4,67