FNIRSI Spotwelder stand/holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this Stand for FNIRSI Spotwelder, I reduced the viewing angle from 135° to 120°, this angle is more pleasant to l
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I made this Stand for FNIRSI Spotwelder, I reduced the viewing angle from 135° to 120°, this angle is more pleasant to look at. The stand provides much more stability for the spotwelder and when you are done you can place the electrodes in the holder, so you prevent them from bumping into something unwanted while they are still warm. I made everything fit exactly, so that it clamps a bit, otherwise the wires of the electrodes push the device up (I didn't want to make it unnecessarily large). My printer is the Creality Ender-3 S1 Pro, for material I used PLA filament and for the print speed I set to 50mm/sec and the Infill density I set to 25%