FNIRSI Spotwelder stand/holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.43 – €6.64 net (excluding VAT)
For file: CE3S1PRO_FNIRSI Spotwelder Stand V1.0.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.04 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 7.26 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I made this Stand for FNIRSI Spotwelder, I reduced the viewing angle from 135° to 120°, this angle is more pleasant to l
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 87
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I made this Stand for FNIRSI Spotwelder, I reduced the viewing angle from 135° to 120°, this angle is more pleasant to look at. The stand provides much more stability for the spotwelder and when you are done you can place the electrodes in the holder, so you prevent them from bumping into something unwanted while they are still warm. I made everything fit exactly, so that it clamps a bit, otherwise the wires of the electrodes push the device up (I didn't want to make it unnecessarily large). My printer is the Creality Ender-3 S1 Pro, for material I used PLA filament and for the print speed I set to 50mm/sec and the Infill density I set to 25%