1 / 1
Minimal Stand's Divider [Add-On] - Tablet, Laptop, Books and Anything In-between.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add more slots to your Minimal Stand with this divider.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 537
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (27)Powiązane
Add more slots to your Minimal Stand with this divider.
The Divider is 5mm thick, please adjust the peg's length accordingly.
Prints Settings:
Supports: Tested with no support.
Layer height: Tested with 0.2mm.
Infill Pattern: 3D Honeycomb.
Infill Percentage: ≥5%
Assembly:
Sandwich it between two bases and drive the peg through like normal before placing the wall on both ends.
Consider Supporting!! Your support will allow me to continue sharing my design.
buymeacoffee.com/supanut.tho
